MAX20073EVKIT#

  MAX20073EVKIT Evaluation Kit for the MAX20073 Description The MAX20073 evaluation kit demonstrates the performance and behavior of the MAX20073, a part in the MAX20015–MAX20018/MAX20073/MAX20074 family of pincompatible, low-voltage, step-down switching regulator ICs. The regulator delivers current up to 2A at an output voltage between 0.5V and 3.8V. The device operates from a 2.7V to 5.5V input supply voltage, making it ideal for postregulation and point-of-load applications. The total error over load, line, and temperature ranges is 1.5%. The base switching frequency is 2.2MHz, which allows for all-ceramic capacitor application designs. The regulator can either be synchronized to an external clock or placed in a power-saving skip mode for increased efficiency at light loads. The regulator provides an enable input and fault flag output. The output voltage can be set using an external resistor-divider and an internal 0.5V reference. Alternatively, it can be programmed at the factory for a specific output voltage, achieving 1.5% output accuracy without resorting to expensive 0.1% resistors. The soft-start time and fault hold time can also be factory programmed. The regulators include overtemperature shutdown and overcurrent limiting. They are designed to continuously operate over the -40°C to +125°C ambient temperature. Key Features      2.7V to 5.5V Input Voltage Range 0.5V to 3.8V Output Voltage Range o Set by External Resistive Divider or Preprogrammed at Factory o Base EV Kit Configuration Set to 1.8V/2A Output High-Frequency Switching (2.2MHz) Allows for an All-Ceramic Capacitor Design Continuously Produces Output Current Up to 2A Compact Solution Size o Externally Adjustable Output Implementation Fits Inside 65mm2 Area o Preprogrammed Output Implementation Fits Inside 55mm2 Area Applications/Uses   Automotive Point-of-Load https://www.maximintegrated.com/en/products/power/switching‐regulators/MAX20073EVKIT.html/tb_tab0/11‐18‐19