MAX306/MAX307
Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
General Description
The MAX306/MAX307 precision, monolithic, CMOS
analog multiplexers (muxes) offer low on-resistance (less
than 100Ω), which is matched to within 5Ω between
channels and remains flat over the specified analog
signal range (7Ω, max). They also offer low leakage over
temperature (INO(OFF) less than 2.5nA at +85°C) and fast
switching speeds (tTRANS less than 250ns). The MAX306
is a single-ended 1-of-16 device, and the MAX307 is a
differential 2-of-8 device.
The MAX306/MAX307 are fabricated with Maxim’s
improved 44V silicon-gate process. Design improvements
yield extremely low charge injection (less than 10pC) and
guarantee electrostatic discharge (ESD) protection greater
than 2000V.
These muxes operate with a single +5V to +30V supply,
or bipolar ±4.5V to ±20V supplies, while retaining TTL/
CMOS-logic input compatibility and fast switching. CMOS
inputs provide reduced input loading. These improved
parts are plug-in upgrades for the industrystandard
DG406, DG407, DG506A, and DG507A.
Applications
●●Sample-and-Hold Circuits
●●Test Equipment
●●Heads-Up Displays
●●Guidance and Control
Systems
●●Military Radios
●● Communications Systems
●●Battery-Operated Systems
PBX, PABX
●●Audio Signal Routing
Benefits and Features
●● Guaranteed On-Resistance Match Between
Channels, < 5Ω Max
●● Low On-Resistance, < 100Ω Max
●● Guaranteed Flat On-Resistance Over Specified
Signal Range, 7Ω Max
●● Guaranteed Charge Injection, < 10pC
●● INO(OFF) Leakage < 2.5nA at +85°C
●● ICOM(OFF) Leakage < 20nA at +85°C
●● ESD Protection > 2000V
●● Plug-In Upgrade for Industry-Standard
DG406/DG407/DG506A/DG507A
●● Single-Supply Operation (+5V to +30V)
Bipolar-Supply Operation (±4.5V to ±20V)
●● Low Power Consumption, < 1.25mW
●● Rail-to-Rail Signal Handling
●● TTL/CMOS-Logic Compatible
Ordering Information
PART
TEMP RANGE
0°C to +70°C
28 PDIP
MAX306CWI
0°C to +70°C
28 Wide SO
MAX306C/D
0°C to +70°C
Dice*
MAX306EPI
-40°C to +85°C
28 PDIP
MAX306EWI
-40°C to +85°C
28 Wide SO
MAX306EQI
-40°C to +85°C
28 PLCC
MAX306EUI
-40°C to +85°C
28 TSSOP
MAX306MJI
-55°C to +125°C
28 CERDIP
Ordering Information continued at end of data sheet.
*Contact factory for dice specifications.
Pin Configurations/Functional Diagrams/Truth Tables
TOP VIEW
28 COM
A3
A2
A1
A0
EN
N.C. 2
27 V-
N.C. 3
26 NO8
NO16 4
25 NO7
X
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
X
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
X
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
X
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
V+ 1
NO15 5
NO14 6
24 NO6
MAX306
23 NO5
NO13 7
22 NO4
NO12 8
21 NO3
NO11 9
20 NO2
NO10 10
19 NO1
NO9 11
18 EN
GND 12
17 A0
N.C. 13
16 A1
A3 14
15 A2
PDIP/SO/TSSOP
19-0270; Rev 5; 3/16
PIN-PACKAGE
MAX306CPI
None
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
MAX306
LOGIC “0” VAL ≤ 0.8V, LOGIC “1” = VAH ≥ 2.4V
Pin Configurations/Functional Diagrams/Truth Tables
continued at end of data sheet.
MAX306/MAX307
Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
Absolute Maximum Ratings
(Voltage Referenced to V-)
V+.......................................................................... -0.3V, +44V
GND....................................................................... -0.3V, +25V
Digital Inputs, NO, COM (Note 1)......... (V- - 2V) to (V+ + 2V) or
30mA (whichever occurs first)
Continuous Current (any terminal)......................................30mA
Peak Current, NO or COM
(pulsed at 1ms, 10% duty cycle max)...........................100mA
Continuous Power Dissipation (TA = +70°C)
Plastic DIP (derate 9.09mW/°C above +70°C).............727mW
Wide SO (derate 12.50mW/°C above +70°C)............1000mW
PLCC (derate 10.53mW/°C above +70°C)...................842mW
CERDIP (derate 16.67mW/°C above +70°C).............1333mW
TSSOP (derate 12.8mW/°C above +70°C)................1025mW
Operating Temperature Ranges
MAX30_C_ _.......................................................0°C to +70°C
MAX30_E_ _................................................... -40°C to +85°C
MAX30_MJI................................................... -55°C to +125°C
Storage Temperature Range............................. -65°C to +150°C
Lead Temperature (soldering, 10s).................................. +300°C
Soldering Temperature (reflow)
PDIP, Wide SO, TSSOP lead(Pb)-free......................... +260°C
PDIP, Wide SO, TSSOP containing lead(Pb)............... +240°C
PLCC lead(Pb)-free......................................................+245°C
PLCC containing lead(Pb)............................................+225°C
CERDIP........................................................................+240°C
Note 1: Signals on NO, COM, A0, A1, A2, A3, or EN exceeding V+ or V- are clamped by internal diodes. Limit forward current to
maximum current ratings.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these
or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect
device reliability.
Electrical Characteristics—Dual Supplies
(V+ = +15V, V- = -15V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
(Note 2)
MAX
UNITS
+15
V
SWITCH
Analog Signal Range
On-Resistance
VNO,
VCOM
RON
(Note 3)
-15
INO = -1.0mA,
VCOM = ±10V
TA = +25°C
TA = TMIN to TMAX
On-Resistance Matching
Between Channels
ΔRON
INO = -1.0mA,
VCOM = ±10V (Note 4)
TA = +25°C
On-Resistance Flatness
RFLAT
INO = -1.0mA,
VCOM = ±5V or 0V
TA = +25°C
VCOM = +10V,
VNO = ±10V,
VEN = 0V
TA = +25°C
VNO = ±10V,
VCOM = +10V,
VEN = 0V
TA = +25°C
NO Off-Leakage Current
(Note 5)
COM Off-Leakage Current
(Note 5)
www.maximintegrated.com
INO(OFF)
ICOM(OFF)
VNO = +10V,
VCOM = ±10V,
VEN = 0V
60
125
1.5
TA = TMIN to TMAX
1.8
MAX306
TA = TMIN
to TMAX
M
TA = TMIN
to TMAX
+0.01
-2.5
Ω
Ω
nA
+5.0
+0.02
+0.75
C, E
-20
+20
M
-40
+40
-0.75
Ω
+0.5
+2.5
-5.0
-0.75
TA = +25°C
MAX307
7
10
-0.5
C, E
5
8
TA = TMIN to TMAX
TA = TMIN
to TMAX
100
+0.02
+0.75
C, E
-10
+10
M
-20
+20
nA
Maxim Integrated │ 2
MAX306/MAX307
Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
Electrical Characteristics—Dual Supplies (continued)
(V+ = +15V, V- = -15V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
TA = +25°C
COM On-Leakage Current
(Note 5)
ICOM(ON)
VCOM = ±10V,
VNO = ±10V,
Sequence
each switch on
MAX306
TA = TMIN
to TMAX
TA = TMIN
to TMAX
TYP
(Note 2)
MAX
-0.75
+0.02
+0.75
C, E
-25
+25
M
-50
+50
TA = +25°C
MAX307
MIN
-0.75
C, E
M
+0.02
+0.75
-12.5
+12.5
-25
+25
UNITS
nA
INPUT
Input Current with
Input Voltage High
Input Current with
Input Voltage Low
IAH
VA = 2.4V or 15V
-1.0
+1.0
µA
IAL
VEN = 0V or 2.4V, VA = 0V
-1.0
+1.0
µA
±4.5
±20
V
SUPPLY
Power-Supply Range
Positive Supply Current
Negative Supply Current
I+
I-
VEN = VA = 0V or 5.0V
TA = +25°C
16
TA = TMIN to TMAX
VEN = 2.4V,
VA(ALL) = 0V
TA = +25°C
VEN = 2.4V,
VA(ALL) = 0V
TA = +25°C
TA = TMIN to TMAX
TA = TMIN to TMAX
30
75
0.075
0.5
1
-1
+1
-10
+10
µA
mA
µA
DYNAMIC
Transition Time (Note 3)
tTRANS
Figure 2
Break-Before-Make Interval
tOPEN
Figure 4
Enable Turn-On Time
(Note 3)
tON(EN)
Figure 3
Enable Turn-Off Time
(Note 3)
tOFF(EN)
Figure 3
TA = +25°C
110
TA = TMIN to TMAX
TA = +25°C
TA = +25°C
400
10
40
130
TA = TMIN to TMAX
TA = +25°C
300
ns
200
400
55
TA = TMIN to TMAX
ns
150
300
ns
ns
CL = 1.0nF,
VNO = 0V,
RS = 0Ω, Figure 5
TA = +25°C
2
VISO
VEN = 0V,
RL = 1kΩ,
fSW = 100kHz, Figure 6
TA = +25°C
-69
dB
Crosstalk Between
Channels
VCT
VEN = 2.4V,
fSW = 100kHz,
VGEN = 1VP-P,
RL = 1kΩ, Figure 7
TA = +25°C
-92
dB
Logic Input Capacitance
CIN
fSW = 1MHz
TA = +25°C
8
pF
Charge Injection
(Note 3)
Off-Isolation
(Note 6)
www.maximintegrated.com
Q
10
pC
Maxim Integrated │ 3
MAX306/MAX307
Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
Electrical Characteristics—Single Supply
(V+ = +12V, V- = 0V, GND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
NO Off-Capacitance
COM Off-Capacitance
COM On-Capacitance
SYMBOL
CNO(OFF)
CONDITIONS
fSW = 1MHz,
VEN = VNO = 0V,
Figure 8
TA = +25°C
fSW = 1MHz, MAX306
V = 0.8V,
CCOM(OFF) EN
VCOM = 0V,
MAX307
Figure 8
TA = +25°C
fSW = 1MHz, MAX306
VEN = 2.4V,
VCOM = 0V,
MAX307
Figure 8
TA = +25°C
CCOM(ON)
MIN
TYP
(Note 2)
MAX
8
UNITS
pF
130
pF
65
140
pF
70
SWITCH
Analog Signal Range
On-Resistance
VNO,
VCOM
(Note 3)
0
12
V
INO = -1.0mA
VCOM = 3V or 10V
TA = +25°C
120
175
Ω
tTRANS
VNO1 = 8V,
VNO8 = 0V,
VIN = 2.4V,
Figure 2
TA = +25°C
130
450
ns
tON(EN)
VINH = 2.4V,
VINL = 0V,
VNO1 = 5V,
Figure 3
TA = +25°C
105
600
ns
tOFF(EN)
VINH = 2.4V,
VINL = 0V,
VNO1 = 5V,
Figure 3
TA = +25°C
80
300
ns
Q
CL = 1.0nF,
VNO = 0V,
RS = 0Ω
TA = +25°C
2
10
pC
RON
DYNAMIC
Transition Time
(Note 3)
Enable Turn-On Time
(Note 3)
Enable Turn-Off Time
(Note 3)
Charge Injection
(Note 3)
Note 2: The algebraic convention where the most negative value is a minimum and the most positive value a maximum is used in
this data sheet.
Note 3: Guaranteed by design.
Note 4: ΔRON = RON(MAX) - RON(MIN). On-resistance match between channels and flatness are guaranteed only with specified
voltages. Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured at
the extremes of the specified analog signal range.
Note 5: Leakage parameters are 100% tested at the maximum-rated hot temperature and guaranteed by correlation at +25°C.
Note 6: Off-isolation = 20log VCOM/VNO, where VCOM = output and VNO = input to off switch.
www.maximintegrated.com
Maxim Integrated │ 4
MAX306/MAX307
Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
Typical Operating Characteristics
(TA = +25°C, unless otherwise noted.)
±10V
100
80
±15V
60
60
+25°C
40
-55°C
160
-5
0
5
10
15
20
-15
-10
-5
+25°C
80
-55°C
60
1
ICOM (ON)
0.1
0.01
INO (OFF)
0.001
20
5
10
15
0.0001
-55 -35 -15
25 45
65
85 105 125
0
0
VCOM (V)
www.maximintegrated.com
5
10
20
ON-LEAKAGE vs. TEMPERATURE
1000
V+ = +15V
V- = -15V
100
10
1
0.1
0.01
0.0001
ICOM (ON)
-55 -35 -15
5
25 45
100
I+
10
65
85 105 125
1
0.1
I-
0.01
-20
-5
15
SUPPLY CURRENT vs. TEMPERATURE
V+ = 12V
V- = 0V
-10
-10
10
TEMPERATURE (°C)
I+, I- (mA)
10
Qj (pC)
5
MAX306/7 TOC-07
V+ = +15V
V- = -15V
-15
5
0.001
CHARGE INJECTION vs. VCOM
20
-30
0
TEMPERATURE (°C)
VCOM (V)
30
20V
VCOM (V)
10
40
0
15
V+ = +15V
V- = -15V
100
OFF-LEAKAGE (nA)
+85°C
100
10
MAX306/7 TOC-05
+125°C
120
5
OFF-LEAKAGE vs. TEMPERATURE
1000
MAX306/7 TOC-04
V+ = +15V
V- = 0V
0
40
VCOM (V)
ON-RESISTANCE vs. VCOM AND
TEMPERATURE (SINGLE SUPPLY)
140
15V
80
VCOM (V)
160
10V
MAX306/7 TOC-06
-10
200
15
MAX306/7 TOC-08
-15
0
5V
240
120
ON-LEAKAGE (nA)
0
-20
RON (Ω)
320
20
20
0
360
280
+85°C
±20V
40
400
+125°C
80
RON (Ω)
RON (Ω)
120
100
ON-RESISTANCE vs. VCOM
(SINGLE SUPPLY)
MAX306/7 TOC-03
±5V
V+ = +15V
V- = -15V
RON (Ω)
140
120
MAX306/7 TOC-01
160
ON-RESISTANCE vs. VCOM AND
TEMPERATURE (DUAL SUPPLIES)
MAX306/7 TOC-02
ON-RESISTANCE vs. VCOM
(DUAL SUPPLIES)
0.001
-55 -35 -15
V+ = +15V
V- = -15V
VEN = VA = 0V, 4.5V
5
25 45
65
85 105 125
TEMPERATURE (°C)
Maxim Integrated │ 5
MAX306/MAX307
Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
Pin Description
MAX306
PIN
NAME
FUNCTION
MAX307
PIN
NAME
FUNCTION
1
V+
Positive Supply Voltage Input
1
V+
Positive Supply Voltage Input
2, 3, 13
N.C.
No Connection. Not internally
connected.
2
COMB
4–11
NO16–NO9
3, 13, 14
N.C.
12
GND
4–11
NO8B–NO1B
14–17
A3–A0
Address Inputs
12
GND
18
EN
Enable Inputs
15, 16, 17
A2, A1, A0
19–26
NO1–NO8
18
EN
19–26
NO1A–NO8A
27
V-
28
COMA
27
V-
28
COM
Analog Inputs–bidirectional
Ground
Analog Inputs–bidirectional
Negative Supply Voltage Input
Output–bidirectional
Applications Information
Operation with Supply Voltages
Other than ±15V
Using supply voltages other than ±15V will reduce the
analog signal range. The MAX306/MAX307 switches
operate with ±4.5V to ±20V bipolar supplies or with a +5V
to +30V single supply; connect V- to GND when operating
with a single supply. Also, both device types can operate
with unbalanced supplies such as +24V and -5V. The
Typical Operating Characteristics graphs show typical onresistance with 20V, 15V, 10V, and 5V supplies. (Switching
times increase for 5V operation, up to a maximum of 10µs.)
www.maximintegrated.com
No Connection. Not internally
connected.
Analog Inputs–bidirectional
Ground
Address Inputs
Enable Input
Analog Inputs–bidirectional
Negative Supply Voltage Input
Output A–bidirectional
V+ and 1V below V-, but low switch resistance and low
leakage characteristics are unaffected. Device operation
is unchanged, and the difference between V+ and Vshould not exceed +44V.
V+
MAX306
NO
Overvoltage Protection
Proper power-supply sequencing is recommended
for all CMOS devices. Do not exceed the absolute
maximum ratings because stresses beyond the listed
ratings may cause permanent damage to the devices.
Always sequence V+ on first, then V-, followed by either
the logic inputs, NO or COM. If power-supply sequencing
is not possible, add two small-signal diodes in series with
supply pins for overvoltage protection (Figure 1). Adding
diodes reduces the analog signal range to 1V above
Output B–bidirectional
COM
Vg
V-
Figure 1. Overvoltage Protection Using External Blocking
Diodes
Maxim Integrated │ 6
MAX306/MAX307
Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
Test Circuits/Timing Diagrams
+15V
V+
A0
A1
+2.4V
NO1
±10V
NO2–NO15
A2
MAX306
A3
NO16
EN
+10V
COM
GND
VOUT
V-
A1
+2.4V
EN
VNO1
NO1B
±10V
+10V
COMB
V-
GND
90%
90%
VNO16
NO8B
MAX307
50%
SWITCH
OUTPUT
VOUT
0V
NO1A–NO8A
A2
tr < 20ns
tf < 20ns
0V
-15V
V+
A0
+3V
35pF
300Ω
+15V
LOGIC
INPUT
300Ω
tTRANS
tTRANS
ON
VOUT
35pF
-15V
Figure 2. Transition Time
+15V
V+
EN
A0
A1
A2
A3
NO1
MAX306
COM
GND
50Ω
-5V
NO2–NO16
VOUT
V-
35pF
1kΩ
+15V
A2
50Ω
+3V
tr < 20ns
tf < 20ns
50%
0V
tON(EN)
tOFF(EN)
0V
NO1B
10%
SWITCH
OUTPUT
-5V
NO1A–NO8A
NO2B-NO8B,
COMA
A0
A1
-15V
V+
EN
LOGIC
INPUT
VOUT
90%
MAX307
GND
COMB
V-
VOUT
1kΩ
35pF
-15V
Figure 3. Enable Switching Time
www.maximintegrated.com
Maxim Integrated │ 7
MAX306/MAX307
Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
Test Circuits/Timing Diagrams (continued)
+15V
+2.4V
V+
EN
A0
NO1–NO16
LOGIC +3V
INPUT
0V
+5V
tr < 20ns
tf < 20ns
50%
A1
A2
MAX306
A3
VOUT
COM
GND
VOUT
V300Ω
50Ω
80%
SWITCH
OUTPUT
35pF
tOPEN
0V
-15V
Figure 4. Break-Before-Make Interval
+15V
RS
NO1–NO16 V+
LOGIC
INPUT
EN
VS
CHANNEL
SELECT
A0
MAX306
COM
A1
A2
A3
V-
-15V
OFF
ON
OFF
0V
VOUT
CL = 1000nF
GND
+3V
∆VOUT
VOUT
∆VOUT IS THE MEASURED VOLTAGE DUE TO CHARGE TRANSFER
ERROR Q WHEN THE CHANNEL TURNS OFF.
Q = CL = ∆VOUT
Figure 5. Charge Injection
www.maximintegrated.com
Maxim Integrated │ 8
MAX306/MAX307
Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
Test Circuits/Timing Diagrams (continued)
VOUT
VIN
NO1
RS = 50Ω
V+
NO16
RL =
1kΩ
MAX306
A0
COM
A1
VOUT
RL = 1kΩ
A2
A3
GND
EN
10nF
RS = 50Ω
V+
NO1
NO2
NO16
MAX306
A0
COM
A1
A2
A3
GND
V-
-15V
OFF-ISOLATION = 20log
10nF
+15V
10nF
+15V
V-
EN
10nF
-15V
VOUT
VIN
CROSSTALK = 20log
Figure 6. Off-Isolation
VOUT
VIN
Figure 7. Crosstalk
+15V
V+
A3
CHANNEL
SELECT
A2
A1
NO1
MAX306 NO16
A0
GND
COM
V-
EN
Meter
Impedance
Analyzer
f = 1MHz
-15V
Figure 8. NO/COM Capacitance
www.maximintegrated.com
Maxim Integrated │ 9
MAX306/MAX307
Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
Pin Configurations/Functional Diagrams/Truth Tables (continued)
TOP VIEW
V+ 1
28 COMA
COMB 2
27 V-
N.C. 3
26 NO8A
NO8B 4
25 NO7A
NO7B 5
24 NO6A
MAX307
NO6B 6
23 NO5A
NO5B 7
22 NO4A
NO4B 8
21 NO3A
NO3B 9
20 NO2A
NO2B 10
19 NO1A
NO1B 11
18 EN
GND 12
17 A0
N.C. 13
16 A1
N.C. 14
15 A2
A2
A1
A0
EN
X
0
0
0
0
1
1
1
1
X
0
0
1
1
0
0
1
1
X
0
1
0
1
0
1
0
1
0
1
1
1
1
1
1
1
1
None
1
2
3
4
5
6
7
8
MAX307
LOGIC “0” VAL ≤ 0.8V, LOGIC “1” = VAH ≥ 2.4V
2
1
V+
NO8
V+
3
V-
N.C.
4
COM
N.C.
TOP VIEW
NO16
PDIP/SO
28 27 26
NO15
5
25
NO7
NO14
6
24
NO6
NO13
7
23
NO5
NO12
8
22
NO4
NO11
9
21
N03
NO10
10
20
N02
NO9
11
19
N01
MAX306
PLCC
N.C. = NO INTERNAL CONNECTION
www.maximintegrated.com
A0
EN
A1
A2
A3
N.C.
GND
12 13 14 15 16 17 18
V-
GND
NO1
NO2
NO3
NO4
NO5
NO6
NO7
NO8
NO9
NO10
NO11
NO12
NO13
NO14
NO15
NO16
COM
CMOS DECODERS/DRIVERS
A0
A1
A2
A3
EN
MAX306 16-CHANNEL SINGLE-ENDED MULTIPLEXER
Maxim Integrated │ 10
MAX306/MAX307
Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
2
1
V+
NO8A
V+
3
V-
COMB
4
COMA
N.C.
TOP VIEW
NO8B
Pin Configurations/Functional Diagrams/Truth Tables (continued)
28 27 26
NO7B
5
25
NO7A
NO6B
6
24
NO6A
NO5B
7
23
NO5A
NO4B
8
22
NO4A
NO3B
9
21
N03A
NO2B
10
20
N02A
NO1B
11
19
N01A
MAX307
A0
COMA
COMB
CMOS DECODERS/DRIVERS
A0
TEMP RANGE
PIN-PACKAGE
MAX307CPI
0°C to +70°C
28 PDIP
MAX307CWI
0°C to +70°C
28 Wide SO
MAX307C/D
0°C to +70°C
Dice*
MAX307EPI
-40°C to +85°C
28 PDIP
MAX307EWI
-40°C to +85°C
28 Wide SO
MAX307EQI
-40°C to +85°C
28 PLCC
MAX307EUI
-40°C to +85°C
28 TSSOP
MAX307MJI
-55°C to +125°C
MAX307MWI/PR
-55°C to +125°C
MAX307MWI/PR-T
-55°C to +125°C
*Contact factory for dice specifications.
A1
A2
EN
MAX307 8-CHANNEL DIFFERENTIAL MULTIPLEXER
Ordering Information (continued)
www.maximintegrated.com
NO1A
NO2A
NO3A
NO4A
NO5A
NO6A
NO7A
NO8A
NO1B
NO2B
NO3B
NO4B
NO5B
NO6B
NO7B
NO8B
PLCC
N.C. = NO INTERNAL CONNECTION
PART
GND
EN
A1
A2
N.C.
N.C.
GND
12 13 14 15 16 17 18
V-
Package Information
For the latest package outline information and land patterns
(footprints), go to www.maximintegrated.com/packages. Note
that a “+”, “#”, or “-” in the package code indicates RoHS status
only. Package drawings may show a different suffix character, but
the drawing pertains to the package regardless of RoHS status.
PACKAGE
TYPE
PACKAGE
CODE
OUTLINE
NO.
LAND
PATTERN NO.
28 PDIP
P28+3
21-0044
—
28 CERDIP
28 Wide SO
W28+6
21-0042
90-0109
28 Wide SO
28 PLCC
Q28+4
21-0049
90-0235
28 Wide SO
28 CDIP
J28-2
21-0046
—
28 TSSOP
U28+2
21-0066
90-0171
Maxim Integrated │ 11
MAX306/MAX307
Precision, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
Revision History
REVISION
NUMBER
3
REVISION
DATE
3/10
PAGES
CHANGED
DESCRIPTION
Changed the single-supply operating voltage minimum from +4.5V to +5V in the
General Description, Features, and Applications Information sections.
1, 6
Added the soldering temperatures for all packages to the Absolute Maximum Ratings
section.
2
11
4
5/14
Added MAX307MWI/PR and MAX307MWI/PR-T to the Ordering Information table.
5
3/16
Updated Electrical Characteristics table and Figure 2
3, 4, 6, 7
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at www.maximintegrated.com.
Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent licenses
are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and max limits)
shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.
Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc.
© 2016 Maxim Integrated Products, Inc. │ 12
工商网监
湘ICP备2023018690号
