Micropower, Single-Supply,
Rail-to-Rail, Precision
Instrumentation Amplifiers
MAX4194–MAX4197
General Description
Benefits and Features
The MAX4194 is a variable-gain precision instrumentation amplifier that combines Rail-to-Rail® single-supply
operation, outstanding precision specifications, and a
high gain bandwidth. This amplifier is also offered in
three fixed-gain versions: the MAX4195 (G = +1V/V), the
MAX4196 (G = +10V/V), and the MAX4197 (G =
+100V/V). The fixed-gain instrumentation amplifiers feature a shutdown function that reduces the quiescent
current to 8µA. A traditional three operational amplifier
configuration is used to achieve maximum DC precision.
The MAX4194–MAX4197 have rail-to-rail outputs and
inputs that can swing to 200mV below the negative rail
and to within 1.1V of the positive rail. All parts draw only
93µA and operate from a single +2.7V to +7.5V supply
or from dual ±1.35V to ±3.75V supplies. These amplifiers
are offered in 8-pin SO packages and are specified for
the extended temperature range (-40°C to +85°C).
See the MAX4198/MAX4199 data sheet for single-supply,
precision differential amplifiers.
• Low Power Consumption Is Ideal for Remote-Sensing
Applications
Medical Equipment
Thermocouple Amplifier
and Battery-Powered Applications
• +2.7V Single-Supply Operation
• Low Power Consumption
• 93µA Supply Current
• 8µA Shutdown Current
(MAX4195/MAX4196/MAX4197)
• Precision Specifications Maximize Sensor Peformance
• High Common-Mode Rejection: 115dB (G = +10V/V)
• Input Common-Mode Range Extends 200mV Below
GND
• Low 50µV Input Offset Voltage (G ≥ +100V/V)
• Low ±0.01% Gain Error (G = +1V/V)
• 250kHz -3dB Bandwidth (G = +1V/V, MAX4194)
• Rail-to-Rail Outputs
Ordering Information
PART
TEMP RANGE
PIN-PACKAGE
MAX4194ESA
-40°C to +85°C
8 SO
MAX4195ESA
MAX4196ESA
MAX4197ESA
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
8 SO
8 SO
8 SO
Selector Guide
4–20mA Loop Transmitters
Data-Acquisition Systems
Battery-Powered/Portable Equipment
Transducer Interface
Bridge Amplifier
PART
SHUTDOWN
GAIN (V/V)
CMRR (dB)
MAX4194
No
Variable
95 (G = +1V/V)
MAX4195
MAX4196
MAX4197
Yes
Yes
Yes
+1
+10
+100
95
115
115
Pin Configurations
TOP VIEW
RG- 1
8
RG+
REF 1
7
VCC
IN- 2
3
6
OUT
IN+
VEE 4
5
REF
VEE 4
IN- 2
IN+
MAX4194
SO
Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd.
19-1468; Rev 2; 5/15
3
MAX4195
MAX4196
MAX4197
SO
8
SHDN
7
VCC
6
OUT
5
FB
Micropower, Single-Supply,
Rail-to-Rail, Precision
Instrumentation Amplifiers
MAX4194–MAX4197
Supply Voltage (VCC to VEE)..................................................+8V
All Other Pins .................................. (VCC + 0.3V) to (VEE - 0.3V)
Current into Any Pin..........................................................±30mA
Output Short-Circuit Duration (to VCC or VEE)........... Continuous
Continuous Power Dissipation (TA = +70°C)
8-Pin SO (derate 5.9mW/°C above +70°C).................. 471mW
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature ......................................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) ................................ +300°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
Electrical Characteristics
(VCC = +5V, VEE = 0V, RL = 25kΩ tied to VCC/2, VREF = VCC/2, TA = TMIN to TMAX, unless otherwise noted. Typical values are at
TA = +25°C.)
PARAMETER
Supply Voltage Range
SYMBOL
CONDITIONS
MIN
TYP
MAX
Single supply
2.7
7.5
Dual supplies
±1.35
±3.75
UNITS
VCC
Inferred by PSR test
Quiescent Current
ICC
VIN+ = VIN- = VCC/2, VDIFF = 0V
93
110
µA
Shutdown Current
ISHDN
ISHDN = VIL, MAX4195/MAX4196/MAX4197 only
8
12
µA
G = +1V/V, VCM = VCC/2, TA = +25°C
±100
±450
G = +10V/V, VCM = VCC/2, TA = +25°C
±75
±225
G = +100V/V, VCM = VCC/2, TA = +25°C
±50
±225
Input Offset Voltage
Input Offset Voltage Drift
(Note 1)
VOS
TCVOS
G = +1000V/V, VCM = VCC/2, TA = +25°C
±50
G = +1V/V, VCM = VCC/2, TA = TMIN to TMAX
±100
±690
G = +1V/V, VCM = VCC/2, TA = TMIN to TMAX
±75
±345
G = +100V/V, VCM = VCC/2, TA = TMIN to TMAX
±50
±345
G = +1000V/V, VCM = VCC/2, TA = TMIN to TMAX
±50
G = +1V/V
±1.0
±4.0
G ≥ +10V/V
±0.5
±2.0
Input Resistance
RIN
VCM = VCC/2
Input Capacitance
CIN
VCM = VCC/2
Input Voltage Range
VIN
Inferred from CMR test
DC Common-Mode
Rejection
VCM = VEE - 0.2V
to VCC - 1.1V,
TA = +25°C,
ΔRS = 1kΩ (Note 1)
1000
Common mode
1000
Differential
1
Common mode
4
VEE - 0.2
66
78
G = +10V
80
94
G = +100V
86
99
G = +1V
60
78
G = +10V
74
94
G = +100V
77
99
µV
µV/°C
MΩ
pF
VCC - 1.1
G = +1V
V
dB
CMRDC
VCM = VEE - 0.2V
to VCC - 1.1V,
TA = TMIN to TMAX,
ΔRS = 1kΩ, (Note 1)
www.maximintegrated.com
Differential
V
Maxim Integrated | 2
Micropower, Single-Supply,
Rail-to-Rail, Precision
Instrumentation Amplifiers
MAX4194–MAX4197
Electrical Characteristics (continued)
(VCC = +5V, VEE = 0V, RL = 25kΩ tied to VCC/2, VREF = VCC/2, TA = TMIN to TMAX, unless otherwise noted. Typical values are at
TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
VCM = VEE + 0.2V
to VCC - 1.1V,
TA = +25°C,
ΔRS = 1kΩ
DC Common-Mode
Rejection
CMRDC
VCM = VEE + 0.2V
to VCC - 1.1V,
TA = TMIN to TMAX,
ΔRS = 1kΩ
AC Common-Mode
Rejection
Power-Supply Rejection
Input Bias Current
Input Bias Current Drift
Input Offset Current
Input Offset Current Drift
CMRAC
PSR
VCM = VEE + 0.2V
to VCC - 1.1V,
f = 120Hz
TYP
G = +1V
78
95
G = +10V
93
115
G = +100V/V
95
115
G = +1000V/V
73
95
G = +10V
88
115
G = +100V/V
90
115
G = +1000V/V
G = +1V
85
G = +10V
101
G = +100V
106
6
VCM = VCC/2
15
IOS
VCM = VCC/2
±1.0
TCIOS
VCM = VCC/2
15
f = 10Hz
85
f = 100Hz
75
f = 10kHz
72
f = 0.1Hz to 10Hz
1.4
f = 10Hz
35
f = 100Hz
32
f = 10kHz
31
f = 0.1Hz to 10Hz
0.7
f = 10Hz
32
f = 100Hz
31
f = 10kHz
8.7
f = 0.1Hz to 10Hz
in
Output Voltage Swing
2.4
f = 100Hz
0.76
f = 10kHz
0.1
f = 0.1Hz to 10Hz
16
VOH, VOL
RL = 5kΩ to VCC/2
www.maximintegrated.com
dB
dB
20
nA
pA/°C
±3.0
nA
pA/°C
nV/√Hz
µVRMS
nV/√Hz
µVRMS
nV/√Hz
0.6
f = 10Hz
RL = 25kΩ to VCC/2
dB
120
VCM = VCC/2
G = +100V/V
Input Noise Current
90
IB
G = +10V/V
UNITS
115
TCIB
en
MAX
115
G = +1V
+2.7V ≤ VCC ≤ +7.5V; VCM = +1.5V;
VOUT = +1.5V; VREF = +1.5V; RL = 25kΩ to
+1.5V; G = +1V/V, +10V/V, +100V/V
G = +1V/V
Input Noise Voltage
MIN
µVRMS
pA/√Hz
pARMS
VCC - VOH
30
100
VOL
30
100
VCC - VOH
100
200
VOL
100
200
mV
Maxim Integrated | 3
Micropower, Single-Supply,
Rail-to-Rail, Precision
Instrumentation Amplifiers
MAX4194–MAX4197
Electrical Characteristics (continued)
(VCC = +5V, VEE = 0V, RL = 25kΩ tied to VCC/2, VREF = VCC/2, TA = TMIN to TMAX, unless otherwise noted. Typical values are at
TA = +25°C.)
PARAMETER
Short-Circuit Current
(Note 2)
SYMBOL
CONDITIONS
ISC
Gain Equation
TC50kΩ
Capacitive-Load Stability
G = +1V
±0.01
±0.1
G = +10V
±0.03
±0.3
G = +100V/V
±0.05
±0.5
G = +1000V/V, MAX4194
±0.5
TA = +25°C,
VCM = VCC/2,
RL = 5kΩ,
VEE + 0.2V ≤ VOUT
≤ VCC - 0.2V
G = +1V
±0.01
±0.1
G = +10V
±0.03
±0.3
G = +100V/V
±0.05
±0.5
G = +1000V/V, MAX4194
±0.5
±1
±8
MAX4196/MAX4197
±1
±15
MAX4194
±16
ppm/°C
±0.001
%
300
pF
CL
BW-3dB
VOUT ≤ 0.1VP-P, G = +10V/V
VCM = VCC/2
G = +100V/V
MAX4194
250
MAX4195
220
MAX4194
17
MAX4196
34
MAX4194
1.5
MAX4197
3.1
Slew Rate
SR
G = +1000V/V MAX4194
VOUT = 2VP-P, G = +1V/V
G = +1V/V
Settling Time
tS
0.1%, VOUT = 2VP-P
G = +10V/V
0.04
G = +100V/V
5
THD
Input Logic Voltage High
VIH
Input Logic Voltage Low
VIL
SHDN Input Current
www.maximintegrated.com
V/µs
ms
7
VOUT = 2VP-P, G = +1V/V, f = 1kHz
0.001
%
VCC - 1.5
VEE < VSHDN < VCC
MAX4195/MAX4196/
MAX4197 only
ppm/°C
kHz
0.147
0.06
0.05
G = +1000V/V
Total Harmonic Distortion
%
MAX4194/MAX4195, G = +1V/V
G = +1V/V
-3dB Bandwidth
UNITS
mA
TA = +25°C,
VCM = VCC/2,
RL = 25kΩ,
VEE + 0.1V ≤ VOUT
≤ VCC - 0.1V
VEE + 0.1V ≤ VOUT ≤ VCC - 0.1V,
VCM = VCC/2, G = +1V/V, +10V/V,
+100V/V, +1000V/V
Nonlinearity
MAX
1+
(50kΩ/RG)
MAX4194 only
Gain Temperature
Coefficient (Note 1)
TYP
±4.5
Gain Error
50kΩ Resistance
Temperature Coefficient
(Note 3)
MIN
V
VCC - 2.5
V
±0.1
µA
Maxim Integrated | 4
Micropower, Single-Supply,
Rail-to-Rail, Precision
Instrumentation Amplifiers
MAX4194–MAX4197
Electrical Characteristics (continued)
(VCC = +5V, VEE = 0V, RL = 25kΩ tied to VCC/2, VREF = VCC/2, TA = TMIN to TMAX, unless otherwise noted. Typical values are at
TA = +25°C.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
Time to Shutdown
tSHDN
G = +1V/V, 0.1%,
VOUT = +3V
MAX4195/MAX4196/
MAX4197 only
0.5
ms
Enable Time From
Shutdown
tENABLE
G = +1V/V, 0.1%,
VOUT = +3.5V
MAX4195/MAX4196/
MAX4197 only
0.5
ms
Power-Up Delay
G = +1V/V, 0.1%, VOUT = +3.5V
1
ms
On/Off Settling Time
tON/OFF
VSHDN = VCC - 2.5V to VCC - 1.5V,
G = +100V/V, 0.1%, VOUT = +3.5V
0.5
ms
Note 1: Guaranteed by design.
Note 2: Maximum output current (sinking/sourcing) in which the gain changes by less than 0.1%.
Note 3: This specification represents the typical temperature coefficient of an on-chip thin film resistor. In practice, the temperature
coefficient of the gain for the MAX4194 will be dominated by the temperature coefficient of the external gain-setting resistor.
Typical Operating Characteristics
(VCC = +5V, VEE = 0, RL = 25kΩ tied to VCC/2, TA = +25°C, unless otherwise noted.)
MAX4194
SMALL-SIGNAL GAIN vs. FREQUENCY
1
0
-1
G = +1V/V
-2
-3
G = +10V/V
G = +100V/V
2
1
0
-1
G = +100V/V
G = +10V/V
-3
-4
-4
-5
-5
-6
G = +1V/V
1k
10k
FREQUENCY (Hz)
www.maximintegrated.com
100k
1M
1k
100
10
1
-6
100
MAX4194 toc03
3
-2
10k
SETTLING TIME (μs)
2
4
MAX4194 toc02-2
NORMALIZED GAIN (dB)
3
NORMALIZED GAIN (dB)
MAX4194 toc01-1
4
0.1% SETTLING TIME vs. GAIN
(VOUT = 2Vp-p)
MAX4195/MAX4196/MAX4197
SMALL-SIGNAL GAIN vs. FREQUENCY
100
1k
10k
FREQUENCY (Hz)
100k
1M
1
10
100
1k
GAIN (V/V)
Maxim Integrated | 5
Micropower, Single-Supply,
Rail-to-Rail, Precision
Instrumentation Amplifiers
MAX4194–MAX4197
Typical Operating Characteristics (continued)
(VCC = +5V, VEE = 0, RL = 25kΩ tied to VCC/2, TA = +25°C, unless otherwise noted.)
MAX4194
LARGE-SIGNAL PULSE RESPONSE
(GAIN = +100V/V)
MAX4194
LARGE-SIGNAL PULSE RESPONSE
(GAIN = +1V/V)
MAX4194 toc04
MAX4197
LARGE-SIGNAL PULSE RESPONSE
(GAIN = +100V/V)
MAX4194 toc05
MAX4194 toc06
INPUT
(500mV/div)
INPUT
(5mV/div)
INPUT
(5mV/div)
OUTPUT
(500mV/div)
OUTPUT
(500mV/div)
OUTPUT
(500mV/div)
20μs/div
200μs/div
200μs/div
MAX4194
SMALL-SIGNAL PULSE RESPONSE
(GAIN = +1V/V)
MAX4194
SMALL-SIGNAL PULSE RESPONSE
(GAIN = +100V/V)
MAX4197
SMALL-SIGNAL PULSE RESPONSE
(GAIN = +100V/V)
MAX4194 toc07
MAX4194 toc08
MAX4194 toc09
INPUT
(50mV/div)
INPUT
(500μV/div)
INPUT
(500μV/div)
OUTPUT
(50mV/div)
OUTPUT
(50mV/div)
OUTPUT
(50mV/div)
20μs/div
200μs/div
200μs/div
POWER-SUPPLY REJECTION
vs. FREQUENCY
G = +1V/V
-40
-50
-60
G = +10V/V
CMR (dB)
PSR (dB)
-40
-60
MAX4194 toc11
-20
-30
MAX4194 toc10
0
COMMON-MODE REJECTION
vs. FREQUENCY
-80
G = +100V/V
G = +1V/V
-70
G = +10V/V
-80
G = +100V/V
-90
-100
-100
-120
G = +1000V/V
-140
-120
1
10
100
1k
FREQUENCY (Hz)
www.maximintegrated.com
10k
G = +1,000V/V
-110
100k
10
100
1k
10k
100k
FREQUENCY (Hz)
Maxim Integrated | 6
Micropower, Single-Supply,
Rail-to-Rail, Precision
Instrumentation Amplifiers
MAX4194–MAX4197
Typical Operating Characteristics (continued)
(VCC = +5V, VEE = 0, RL = 25kΩ tied to VCC/2, TA = +25°C, unless otherwise noted.)
MAX4195/MAX4196
TOTAL HARMONIC DISTORTION PLUS NOISE
vs. FREQUENCY
VOLTAGE-NOISE DENSITY
vs. FREQUENCY
G = +1V/V
MAX4194 toc13
1.000
MAX4194 toc12
VOLTAGE NOISE DENSITY (nV/÷Hz)
1,000
0.100
THD + NOISE (%)
100
G = +10V/V
10
0.010
MAX4196
G = +10V/V
0.001
G = +1V/V
MAX4195
G = +100V/V
G = +1000V/V
1
10
100
1k
10k
0
100k
1
10
FREQUENCY (Hz)
SUPPLY CURRENT vs. SUPPLY VOLTAGE
1k
10k
SUPPLY CURRENT vs. TEMPERATURE
98
MAX4194 toc14
120
110
100
90
G = +1000V/V
96
SUPPLY CURRENT (μA)
SUPPLY CURRENT (μA)
100
FREQUENCY (Hz)
MAX4194 toc15
1
G = +100V/V
94
92
G = +1V/V, +10V/V
90
88
86
2
3
4
5
6
7
SUPPLY VOLTAGE (V)
8
84
9
10
35
60
85
8
6
4
INPUT BIAS CURRENT vs. TEMPERATURE
10
INPUT BIAS CURRENT (nA)
MAX4194 toc16
10
SHUTDOWN CURRENT (μA)
-15
TEMPERATURE (°C)
MAX4195/MAX4196/MAX4197
SHUTDOWN CURRENT vs. TEMPERATURE
8
6
4
2
2
0
-40
-40
MAX4194TOC17
80
-15
www.maximintegrated.com
10
35
TEMPERATURE (°C)
60
85
0
-40
-15
10
35
60
85
TEMPERATURE (°C)
Maxim Integrated | 7
Micropower, Single-Supply,
Rail-to-Rail, Precision
Instrumentation Amplifiers
MAX4194–MAX4197
Typical Operating Characteristics (continued)
(VCC = +5V, VEE = 0, RL = 25kΩ tied to VCC/2, TA = +25°C, unless otherwise noted.)
INPUT OFFSET CURRENT vs. TEMPERATURE
MAX4197
0
-50
-100
MAX4195
-150
MAX4194TOC19
INPUT OFFSET CURRENT (pA)
MAX4196
INPUT OFFSET VOLTAGE vs. TEMPERATURE
100
75
INPUT OFFSET VOLTAGE (μV)
MAX4194TOC18
50
MAX4197
50
MAX4196
M
25
0
-25
MAX4194
(G = +10V/V)
-50
MAX4194
(G = +100V/V,
G = +1000V/V)
-75
MAX4195
-200
-40
-15
10
35
60
85
-100
-40
-15
TEMPERATURE (°C)
10
35
60
85
TEMPERATURE (°C)
Pin Description
PIN
FUNCTION
MAX4195
MAX4196
MAX4197
NAME
MAX4194
1, 8
—
RG-, RG+
5
1
REF
Reference Voltage. Offsets output voltage.
2
2
IN-
Inverting Input
3
3
IN+
Noninverting Input
4
4
VEE
Negative Supply Voltage
—
5
FB
Feedback. Connects to OUT.
6
6
OUT
Amplifier Output
7
7
VCC
Positive Supply Voltage
—
8
SHDN
www.maximintegrated.com
FUNCTION
Connection for Gain-Setting Resistor
Shutdown Control
Maxim Integrated | 8
Micropower, Single-Supply,
Rail-to-Rail, Precision
Instrumentation Amplifiers
MAX4194–MAX4197
Detailed Description
Input Stage
The MAX4194–MAX4197 family of low-power instrumentation amplifiers implements a three-amplifier topology (Figure 1). The input stage is composed of two
operational amplifiers that together provide a fixed-gain
differential and a unity common-mode gain. The output
stage is a conventional differential amplifier that provides an overall common-mode rejection of 115dB (G =
VCC
25kΩ
IN25kΩ
25kΩ
RGOUT
MAX4194
RG+
25kΩ
25kΩ
+10V/V). The MAX4194’s gain can be externally set
between +1V/V and +10,000V/V (Table 1). The
MAX4195/MAX4196/MAX4197 have on-chip gain-setting resistors (Figure 2), and their gains are fixed at
+1V/V, +10V/V, and +100V/V, respectively.
Input Voltage Range
and Detailed Operation
The common-mode input range for all of these amplifiers is VEE - 0.2V to VCC - 1.1V. Ideally, the instrumentation amplifier (Figure 3) responds only to a differential
voltage applied to its inputs, IN+ and IN-. If both inputs
are at the same voltage, the output is VREF. A differential voltage at IN+ (VIN+) and IN- (VIN-) develops an
identical voltage across the gain-setting resistor, causing a current (I G ) to flow. This current also flows
through the feedback resistors of the two input amplifiers A1 and A2, generating a differential voltage of:
VOUT2 - VOUT1 = IG · (R1 + RG + R1)
REF
IN+
25kΩ
VEE
Figure 1. MAX4194 Simplified Block Diagram
VCC
25kΩ
IN-
where VOUT1 and VOUT2 are the output voltages of A1
and A2, RG is the gain-setting resistor (internal or external to the part), and R1 is the feedback resistor of the
input amplifiers.
IG is determined by the following equation:
IG = (VIN+ - VIN-) / RG
FB
The output voltage (V OUT ) for the instrumentation
amplifier is expressed in the following equation:
25kΩ
25kΩ
MAX4195
MAX4196
MAX4197
RG
25kΩ
SHDN
25kΩ
REF
IN+
25kΩ
VEE
Figure 2. MAX4195/MAX4196/MAX4197 Simplified Block
Diagram
The common-mode input range is a function of the
amplifier’s output voltage and the supply voltage. With
a power supply of VCC, the largest output signal swing
can be obtained with REF tied to VCC/2. This results in
an output voltage swing of ±VCC/2. An output voltage
swing less than full-scale increases the common-mode
input range.
* R1 = R2 = 25kΩ
** RG = INTERNAL TO MAX4195/MAX4196/MAX4197
RG = EXTERNAL TO MAX4194
R2*
VOUT1
VIN-
VOUT = (VIN+ - VIN-) · [(2 · R1) / RG] + 1
OUT
A1
R2*
IG
R1*
VIN+ - VIN-
VOUT2 - VOUT1
RG**
A3
OUT
R1*
VIN+
(
VOUT = (VIN+ - VIN-) · 1 +
IG
R2*
A2
VOUT2
2R1
RG
)
REF
R2*
Figure 3. Instrumentation Amplifier Configuration
www.maximintegrated.com
Maxim Integrated | 9
Micropower, Single-Supply,
Rail-to-Rail, Precision
Instrumentation Amplifiers
MAX4194–MAX4197
GAIN (V/V)
CLOSEST RG (1%) CLOSEST RG (5%)
(Ω)
(Ω)
+1
∞*
∞*
+2
49.9k
51k
+5
12.4k
12k
+10
5.62k
5.6k
+20
2.61k
2.7k
+50
1.02k
1.0k
+100
511
510
+200
249
240
+500
100
100
+1,000
49.9
51
+2,000
24.9
24
+5,000
10
10
+10,000
4.99
5.1
*Leave pins 1 and 8 open for G = +1V/V.
VCM vs. VOUT Characterization
Figure 4 illustrates the MAX4194 typical common-mode
input voltage range over output voltage swing at unitygain (pins 1 and 8 left floating), with a single-supply
voltage of VCC = +5V and a bias reference voltage of
VREF = VCC/2 = +2.5V. Points A and D show the full
input voltage range of the input amplifiers (VEE - 0.2V to
VCC - 1.1V) since, with +2.5V output, there is zero input
differential swing. The other points (B, C, E, and F) are
determined by the input voltage range of the input
amps minus the differential input amplitude necessary
to produce the associated VOUT. For the higher gain
configurations, the VCM range will increase at the endpoints (B, C, E, and F) since a smaller differential voltage is necessary for the given output voltage.
This disables the instrumentation amplifier and puts its
output in a high-impedance state. Pulling SHDN high
enables the instrumentation amplifier.
Applications Information
Setting the Gain (MAX4194)
The MAX4194’s gain is set by connecting a single,
external gain resistor between the two RG pins (pin 1
and pin 8), and can be described as:
G = 1 + 50kΩ / RG
where G is the instrumentation amplifier’s gain and RG
is the gain-setting resistor.
The 50kΩ resistor of the gain equation is the sum of the
two resistors internally connected to the feedback loops
of the IN+ and IN- amplifiers. These embedded feedback resistors are laser trimmed, and their accuracy
and temperature coefficients are included in the gain
and drift specification for the MAX4194.
5
COMMON-MODE INPUT VOLTAGE (V)
Table 1. MAX4194 External Gain
Resistor Selection
MAX4194/MAX4195
G = +1V/V
REF = +2.5V/+1.5V
4
VCC = +5V/+3V
VEE = 0
TA = +25°C
A
3
B
F
C
E
2
1
D
0.03
0
0
1
2
4.97
3
4
5
OUTPUT VOLTAGE (V)
Figure 4. Common-Mode Input Voltage vs. Output Voltage
Rail-to-Rail Output Stage
The MAX4194–MAX4197’s output stage incorporates a
common-source structure that maximizes the dynamic
range of the instrumentation amplifier.
The output can drive up to a 25kΩ (tied to VCC/2) resistive load and still typically swing within 30mV of the
rails. With an output load of 5kΩ tied to VCC/2, the output voltage swings within 100mV of the rails.
MAX4195
OUT
AC-COUPLED
(VDIFF = 2V,
G = +1V/V)
(500mV/div)
Shutdown Mode
SHDN
(5V/div)
The MAX4195–MAX4197 feature a low-power shutdown
mode. When the shutdown pin (SHDN) is pulled low,
the internal amplifiers are switched off and the supply
current drops to 8µA typically (Figures 5a, 5b, and 5c).
www.maximintegrated.com
50μs/div
Figure 5a. MAX4195 Shutdown Mode
Maxim Integrated | 10
Micropower, Single-Supply,
Rail-to-Rail, Precision
Instrumentation Amplifiers
MAX4194–MAX4197
VCC
MAX4196
OUT
AC-COUPLED
(VDIFF = 200mV,
G = +10V/V)
(500mV/div)
IN+
RISO
VOUT
INRL
VEE
RG = ∞
(MAX4194)
(INTERNAL, MAX4195)
VREF
CL
VREF
SHDN
(5V/div)
Figure 6a. Using a Resistor to Isolate a Capacitive Load from
the Instrumentation Amplifier (G = +1V/V)
50μs/div
Figure 5b. MAX4196 Shutdown Mode
INPUT
(50mV/div)
MAX4197
OUT
AC-COUPLED
(VDIFF = 20mV,
G = +100V/V)
(500mV/div)
OUTPUT
(50mV/div)
SHDN
(5V/div)
50μs/div
50μs/div
Figure 5c. MAX4197 Shutdown Mode
The accuracy and temperature drift of the RG resistors
also influence the IC’s precision and gain drift, and can
be derived from the equation above. With low RG values, which are required for high-gain operation, parasitic resistances may significantly increase the gain
error.
Figure 6b. Small-Signal Pulse Response with Excessive
Capacitive Load (RL = 25kΩ, CL = 1000pF)
INPUT
(50mV/div)
Capacitive-Load Stability
The MAX4194–MAX4197 are stable for capacitive loads
up to 300pF (Figure 6a). Applications that require
greater capacitive-load driving capability can use an
isolation resistor (Figure 6b) between the output and
the capacitive load to reduce ringing on the output signal. However, this alternative reduces gain accuracy
because RISO (Figure 6c) forms a potential divider with
the load resistor.
OUTPUT
(50mV/div)
50μs/div
Figure 6c. Small-Signal Pulse Response with Excessive
Capacitive Load and Isolating Resistor (RISO = 75Ω, RL =
25kΩ, CL = 1000pF)
www.maximintegrated.com
Maxim Integrated | 11
Micropower, Single-Supply,
Rail-to-Rail, Precision
Instrumentation Amplifiers
MAX4194–MAX4197
identical two-element strain gauges) to the inputs of the
MAX4194. The bridge contains four resistors, two of
which increase and two of which decrease by the same
ratio.
Power-Supply Bypassing and Layout
Good layout technique optimizes performance by
decreasing the amount of stray capacitance at the
instrumentation amplifier’s gain-setting pins. Excess
capacitance will produce peaking in the amplifier’s frequency response. To decrease stray capacitance, minimize trace lengths by placing external components as
close to the instrumentation amplifier as possible. For
best performance, bypass each power supply to
ground with a separate 0.1µF capacitor.
With a fully balanced bridge, points A (IN+) and B (IN-)
see half the excitation voltage (V BRIDGE ). The low
impedance (120Ω to 350Ω) of the strain gauges, however, could cause significant voltage drop contributions
by the wires leading to the bridge, which would cause
excitation variations. Output voltage VOUT can be calculated as follows:
VOUT = VAB · G
where G = (1 + 50kΩ / RG) is the gain of the instrumentation amplifier.
Since VAB is directly proportional to the excitation, gain
errors may occur.
Transducer Applications
The MAX4194–MAX4197 instrumentation amplifiers can
be used in various signal-conditioning circuits for thermocouples, PT100s, strain gauges (displacement sensors), piezoresistive transducers (PRTs), flow sensors,
and bioelectrical applications. Figure 7 shows a simplified example of how to attach four strain gauges (two
RG
REFERENCE
RG+
IN+
R
VBRIDGE
VAB = VIN+ - VINR
RG-
IN-
REF
B
R
μP
VEE
R = 120Ω - 350Ω
A
MAX144
ADC
OUT
VCC
R
Figure 7. Strain Gauge Connection to the MAX4194
Chip Information
Package Information
TRANSISTOR COUNT: 432
For the latest package outline information and land patterns (footprints), go to www.maximintegrated.com/packages. Note that a
“+”, “#”, or “-” in the package code indicates RoHS status only.
Package drawings may show a different suffix character, but the
drawing pertains to the package regardless of RoHS status.
www.maximintegrated.com
PACKAGE
TYPE
PACKAGE
CODE
OUTLINE
NO.
LAND
PATTERN NO.
8 SO
S8-5
21-0041
90-0096
Maxim Integrated | 12
Micropower, Single-Supply,
Rail-to-Rail, Precision
Instrumentation Amplifiers
MAX4194–MAX4197
Revision History
REVISION
NUMBER
REVISION
DATE
2
5/15
DESCRIPTION
Updated Benefits and Features section
PAGES
CHANGED
1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim Integrated’s website at www.maximintegrated.com.
Maxim Integrated cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim Integrated product. No circuit patent
licenses are implied. Maxim Integrated reserves the right to change the circuitry and specifications without notice at any time. The parametric values (min and
max limits) shown in the Electrical Characteristics table are guaranteed. Other parametric values quoted in this data sheet are provided for guidance.
Maxim Integrated and the Maxim Integrated logo are trademarks of Maxim Integrated Products, Inc.
© 2015 Maxim Integrated Products, Inc. | 13
工商网监
湘ICP备2023018690号
