MAX96701GTG/V+

    MAX96701 14-Bit GMSL Serializer with HighImmunity/Bandwidth Mode and Coax/STP Cable Drive Compact 1.6Gbps Serializer with Crosspoint and CRC Protection of Video and Control Data for ADAS Applications Description The MAX96701 is a compact serializer in a 4mm x 4mm TQFN package especially suited for automotive camera applications. In high-bandwidth mode, the parallel-clock maximum is 116MHz for 12-bit linear or combined HDR data types. The embedded control channel operates at 9.6kbps to 1Mbps in I2C mode, allowing programming of serializer, deserializer (SerDes), and camera registers independent of video timing. For driving longer cables, the IC has programmable pre/deemphasis. Programmable spread spectrum is available on the serial output. The serial output meets ISO 10605 and IEC 61000-42 ESD standards. The supply range is 1.7V to 1.9V. The MAX96701 is available in a 24-pin TQFN package with 0.5mm lead pitch, and operates over the -40°C to +115°C temperature range. Key Features  Ideal for Safety Camera Applications o Works with Low-Cost 50Ω Coax (100Ω STP) Cables o Error Detection of Video/Control Data o High-Immunity Mode for Robust Control-Channel EMC Tolerance o Retransmission of Control Data Upon Error Detection o Best-in-Class Supply Current: 88mA (max) o Pre/Deemphasis Allows 15m Cable at Full Speed      o 24-Pin (4mm × 4mm) TQFN Package with 0.5mm Lead Pitch High-Speed Data Serialization for Megapixel Cameras o Up to 1.74Gbps Serial-Bit Rate o 12.5MHz to 87MHz × 14 Bit + H/V Data Multiple Modes for System Flexibility o 9.6kbps to 1Mbps Control Channel in I2C Mode (with Clock Stretch) o Crosspoint Switch Accepts Any Input Bitmap o Modes for Encoded VSYNC and HSYNC Reduces EMI and Shielding Requirements o Programmable Output Spread Spectrum o Tracks Spread Spectrum Applied at the Parallel Input o 1.7V to 1.9V I/O Supply Peripheral Features for Camera Power-Up and Verification o Built-In PRBS Generator for BER Testing o Dedicated GPO for Camera Frame-Sync Trigger and Other Uses o Remote/Local Wake-Up from Sleep Mode Meets AEC-Q100 Automotive Specification o -40°C to +115°C Operating Temperature o >±8kV Contact and >±15kV Air IEC 61000-4-2 and ISO 10605 ESD Protection Applications/Uses  Automotive Camera Applications                                   https://www.maximintegrated.com/en/products/interface/high‐speed‐signaling/MAX96701.html/11‐21‐19