MAX96705AGTJ/V+

  MAX96705A 16-Bit GMSL Serializer with HighImmunity/Bandwidth Mode and Coax/STP Cable Drive Compact 1.6Gbps Serializer with Crosspoint and CRC Protection of Video and Control Data for ADAS Applications Description The MAX96705A is a compact serializer with features especially suited for automotive camera applications. It is function and pin compatible with the MAX9271. In highbandwidth mode, the parallel-clock maximum is 116MHz for 12-bit linear or combined HDR data types. The embedded control channel operates at 9.6kbps to 1Mbps in UART, I2C, and mixed UART/I2C modes, allowing programming of serializer, deserializer, and camera registers independent of video timing. For driving longer cables, the IC has programmable pre/deemphasis. Programmable spread spectrum is available on the serial output. The serial output meets ISO 10605 and IEC 61000-4-2 ESD standards. The core supply range is 1.7V to 1.9V, and the I/O supply range is 1.7V to 3.6V. The MAX96705A is available in a 32-pin (5mm x 5mm) TQFN package with 0.5mm lead pitch, and operates over the -40°C to +115°C temperature range. Key Features  Ideal for Safety Camera Applications o Works with Low-Cost 50Ω Coax (100Ω STP) Cables o Error Detection of Video/Control Data o High-Immunity Mode for Robust Control-Channel EMC Tolerance o Retransmission of Control Data Upon Error Detection Best-in-Class Supply Current: 93mA (max) Pre/Deemphasis Allows 15m Cable at Full Speed 32-Pin (5mm × 5mm) TQFN Package with 0.5mm Lead Pitch High-Speed Data Serialization for Megapixel Cameras o Up to 1.74Gbps Serial-Bit Rate o 12.5MHz to 87MHz × 14 Bit + H/V Data o 36.66MHz to 116MHz × 12-Bit + H/V Data (through Internal Encoding) Multiple Modes for System Flexibility o 9.6kbps to 1Mbps Control Channel in UART, I²C (with Clock Stretch), or UARTto-I²C Modes o Crosspoint Switch Accepts Any Input Bitmap o Modes for Encoded VSYNC and HSYNC Reduces EMI and Shielding Requirements o Programmable Output Spread Spectrum o Tracks Spread Spectrum Applied at the Parallel Input o 1.7V to 3.6V I/O Supply Peripheral Features for Camera Power-Up and Verification o Built-In PRBS Generator for BER Testing o Dedicated GPO for Camera Frame-Sync Trigger and Other Uses o Remote/Local Wake-Up from Sleep Mode Meets AEC-Q100 Automotive Specification o -40°C to +115°C Operating Temperature o ±8kV Contact and ±15kV Air IEC 61000-4-2 and ISO 10605 ESD Protection o o o      Applications/Uses  Automotive Camera Applications                 https://www.maximintegrated.com/en/products/interface/high‐speed‐signaling/MAX96705A.html/tb_tab0/11‐21‐19