OP07DRZ-REEL7

150 μV Maximum Offset Voltage Op Amp OP07D Low offset voltage: 150 µV max Input offset drift: 1.5 µV/°C max Low noise: 0.25 μV p-p High gain CMRR and PSRR: 115 dB min Low supply current: 1.1 mA Wide supply voltage range: ±4 V to ±18 V operation PIN CONFIGURATIONS NULL 1 –IN 2 +IN 3 V– 4 OP07D TOP VIEW (Not to Scale) 8 NULL 7 V+ 6 OUT 5 NC NC = NO CONNECT 05867-001 FEATURES Figure 1. 8-Lead SOIC_N (R-8), 8-Lead DIP (N-8) APPLICATIONS Medical and industrial instrumentation Sensors and controls Thermocouple RTDs Strain bridges Shunt current measurements Precision filters GENERAL DESCRIPTION The OP07D is a precision, ultralow offset amplifier. It integrates low power (1.1 mA typical), low input bias current (±1 nA maximum), and high CMRR/PSRR (130 dB) in the small DIP package. Operation is fully specified from ±5 V to ±15 V supply. The OP07D provides higher accuracy than industry-standard OP07-type amplifiers due to Analog Devices’ iPolar™ process, which supports enhanced performance in a smaller footprint. These performance enhancements include wider output swing, lower power, and higher CMRR (common-mode rejection ratio) and PSRR (power supply rejection ratio). The OP07D maintains stability of offsets and gain virtually regardless of variations in time or temperature. Excellent linearity and gain accuracy can be maintained at high closed-loop gains. The OP07D is fully specified over the extended industrial temperature range of −40°C to +125°C. The OP07D amplifier is available in 8-lead DIP and the popular 8-lead, narrow SOIC lead-free packages. Rev. A Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. www.analog.com Tel: 781.329.4700 Fax: 781.461.3113 © 2005–2011 Analog Devices, Inc. All rights reserved. OP07D TABLE OF CONTENTS Features .............................................................................................. 1 Absolute Maximum Ratings ............................................................5 Applications ....................................................................................... 1 Thermal Resistance .......................................................................5 General Description ......................................................................... 1 ESD Caution...................................................................................5 Pin Configurations ........................................................................... 1 Typical Performance Characteristics ..............................................6 Revision History ............................................................................... 2 Outline Dimensions ....................................................................... 13 Specifications..................................................................................... 3 Ordering Guide .......................................................................... 14 REVISION HISTORY 2/11—Rev. 0 to Rev. A Changes to Output Voltage Swing Parameter ............................... 4 Changes to Figure 42 ...................................................................... 12 Updated Outline Dimensions ....................................................... 13 Changes to Ordering Guide .......................................................... 14 12/05—Revision 0: Initial Version Rev. A | Page 2 of 16 OP07D SPECIFICATIONS VS = ±5.0 V, TA = 25°C, unless otherwise specified. Table 1. Parameter INPUT CHARACTERISTICS Offset Voltage Symbol Test Conditions/Comments Min VOS Typ Max Unit 40 150 250 350 1 μV μV μV nA 1 1 1 +3.5 nA nA nA V dB dB V/mV V/mV μV/°C μV/°C 0°C ≤ TA ≤ 70°C −40°C ≤ TA ≤ +125°C Input Bias Current IB Input Offset Current IOS 0.2 −40°C ≤ TA ≤ +125°C 0.1 −40°C ≤ TA ≤ +125°C Input Voltage Range Common-Mode Rejection Ratio CMRR Open-Loop Gain AVO Offset Voltage Drift ∆VOS/∆T OUTPUT CHARACTERISTICS Output Voltage Swing Short-Circuit Current Output Current POWER SUPPLY Power Supply Rejection Ratio Supply Current/Amplifier DYNAMIC PERFORMANCE Slew Rate Gain Bandwidth Product Phase Margin NOISE PERFORMANCE Voltage Noise Voltage Noise Density Current Noise Density VOUT ISC IO PSRR ISY VCM = ±3 V −40°C ≤ TA ≤ +125°C RL = 2 kΩ to ground, VO = ±3 V −40°C ≤ TA ≤ +125°C 0°C ≤ TA ≤ 70°C −40°C ≤ TA ≤ +125°C RL = 10 kΩ to ground −40°C ≤ TA ≤ +125°C RL = 2 kΩ to ground −40°C ≤ TA ≤ +125°C −3.5 120 120 1000 1000 10,000 0.5 0.5 ±3.95 ±3.95 ±3.9 ±3.9 1.8 1.4 ±4.1 V V V V mA mA ±4 27 15 VO = 3.5 V VS = ±4.0 V to ±18.0 V 0°C ≤ TA ≤ 70°C −40°C ≤ TA ≤ +125°C VO = 0 V 0°C ≤ TA ≤ 70°C −40°C ≤ TA ≤ +125°C 127 115 115 110 130 1.1 1.25 1.45 1.75 dB dB dB mA mA mA SR GBP RL = 10 kΩ 0.2 0.6 80 V/μs MHz Degrees en p-p en in 0.1 Hz to 10 Hz f = 1 kHz f = 1 kHz 0.28 10 0.074 μV p-p nV/√Hz pA/√Hz Rev. A | Page 3 of 16 OP07D VS = ±15 V, TA = 25°C, unless otherwise specified. Table 2. Parameter INPUT CHARACTERISTICS Offset Voltage Symbol Test Conditions/Comments Min VOS Typ Max Unit 45 150 250 350 1 μV μV μV nA 1 1 1 +13.5 nA nA nA V dB dB V/mV V/mV μV/°C μV/°C 0°C ≤ TA ≤ 70°C −40°C ≤ TA ≤ +125°C Input Bias Current IB Input Offset Current IOS 0.2 −40°C ≤ TA ≤ +125°C 0.2 −40°C ≤ TA ≤ +125°C Input Voltage Range Common-Mode Rejection Ratio CMRR Open-Loop Gain AVO Offset Voltage Drift ∆VOS/∆T OUTPUT CHARACTERISTICS Output Voltage Swing Short-Circuit Current Output Current POWER SUPPLY Power Supply Rejection Ratio Supply Current/Amplifier DYNAMIC PERFORMANCE Slew Rate Gain Bandwidth Product Phase Margin NOISE PERFORMANCE Voltage Noise Voltage Noise Density Current Noise Density VOUT ISC IO PSRR ISY VCM = ±13.0 V −40°C ≤ TA ≤ +125°C RL = 2 kΩ to ground, VO = ±11 V −40°C ≤ TA ≤ +125°C 0°C ≤ TA ≤ 70°C −40°C ≤ TA ≤ +125°C RL = 10 kΩ to ground −40°C ≤ TA ≤ +125°C RL = 2 kΩ to ground −40°C ≤ TA ≤ +125°C −13.5 120 120 1000 1000 10,000 0.5 0.5 ±13.95 ±13.9 ±13.75 ±13.7 2.5 1.5 ±14 V V V V mA mA ±13.8 30 15 VO = 13.5 V VS = ±4.0 V to ±18.0 V 0°C ≤ TA ≤ 70°C −40°C ≤ TA ≤ +125°C VO = 0 V 0°C ≤ TA ≤ 70°C −40°C ≤ TA ≤ +125°C 140 115 115 110 130 1.1 1.3 1.55 1.85 dB dB dB mA mA mA SR GBP RL = 10 kΩ 0.2 0.6 80 V/μs MHz Degrees en p-p en in 0.1 Hz to 10 Hz f = 1 kHz f = 1 kHz 0.25 10 0.074 μV p-p nV/√Hz pA/√Hz Rev. A | Page 4 of 16 OP07D ABSOLUTE MAXIMUM RATINGS Table 3. Parameter Supply Voltage Input Voltage Differential Input Voltage Output Short-Circuit Duration to GND Storage Temperature Range Operating Temperature Range Junction Temperature Range Lead Temperature (Soldering, 10 sec) Rating ±18 V ±V supply ±0.7 V Indefinite −65°C to +150°C −40°C to +125°C −65°C to +150°C +300°C Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. THERMAL RESISTANCE θJA is specified for worst-case conditions, that is, a device soldered in a circuit board for surface-mount packages. Table 4. Package Type 8-Lead DIP (N-8) 8-Lead SOIC (R-8) θJA 103 158 ESD CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. Rev. A | Page 5 of 16 θJC 43 43 Unit °C/W °C/W OP07D TYPICAL PERFORMANCE CHARACTERISTICS 45 50 VS = ±15V VS = ±15V 40 45 NUMBER OF AMPLIFIERS NUMBER OF AMPLIFIERS 40 35 30 25 20 15 35 30 25 20 15 10 10 5 5 –60 –40 –20 0 20 40 60 80 100 VOS (µV) 0 05867-003 –100 –80 0.15 0.30 0.45 0.60 0.75 0.90 1.20 TCVOS (µV/°C) Figure 2. Number of Amplifiers vs. Offset Voltage Figure 5. Number of Amplifiers vs. TCVOS 40 200 VS = ±5V VS = ±15V 150 30 100 25 50 20 0 15 –50 10 –100 5 –150 0 –100 –80 –60 –40 –20 0 20 40 60 80 100 VOS (µV) –200 –50 0 50 100 150 TEMPERATURE (°C) Figure 3. Number of Amplifiers vs. Offset Voltage 05867-005 VOS (µV) 35 05867-004 NUMBER OF AMPLIFIERS 1.05 05867-048 0 0 Figure 6. Offset Voltage vs. Temperature 50 VS = ±5V 200 VS = ±5V 150 100 30 VOS (µV) 50 20 0 –50 10 –100 0 0.15 0.30 0.45 0.60 0.75 0.90 TCVOS (µV/°C) 1.05 –200 –50 0 50 100 TEMPERATURE (°C) Figure 7. Offset Voltage vs. Temperature Figure 4. Number of Amplifiers vs. TCVOS Rev. A | Page 6 of 16 150 05867-006 –150 0 05867-047 NUMBER OF AMPLIFIERS 40 OP07D –13.92 1.6 VS = ±15V RL = 10kΩ –13.94 1.4 –13.96 VS = ±15V –13.98 VOL (V) ISY (mA) 1.2 VS = ±5V 1.0 –14.00 –14.02 –14.04 0.8 –14.06 0.6 0 50 100 150 TEMPERATURE (°C) –14.10 –50 05867-007 0.4 –50 0 50 100 150 TEMPERATURE (°C) 05867-011 –14.08 Figure 11. Negative Output Voltage Swing vs. Temperature Figure 8. Supply Current vs. Temperature 14.40 –3.98 VS = ±15V RL = 10kΩ VS = ±5V RL = 10kΩ –4.00 14.35 –4.02 –4.04 VOL (V) VOH (V) 14.30 14.25 14.20 –4.06 –4.08 –4.10 –4.12 14.15 0 50 100 150 TEMPERATURE (°C) –4.16 –50 05867-009 14.10 –50 0 50 100 150 TEMPERATURE (°C) Figure 9. Positive Output Voltage Swing vs. Temperature 05867-012 –4.14 Figure 12. Negative Output Voltage Swing vs. Temperature 4.45 0 VS = ±5V RL = 10kΩ VS = ±15V 4.40 –0.1 4.35 IB (nA) 4.30 –0.3 4.25 4.15 –50 0 50 100 150 TEMPERATURE (°C) Figure 10. Positive Output Voltage Swing vs. Temperature –0.5 –50 0 50 100 TEMPERATURE (°C) Figure 13. Input Bias Current vs. Temperature Rev. A | Page 7 of 16 150 05867-013 –0.4 4.20 05867-010 VOH (V) –0.2 OP07D 0 150 VS = ±5V VS = ±4V TO ±18V –0.05 –0.10 140 PSRR (dB) IB (nA) –0.15 –0.20 –0.25 130 –0.30 0 50 100 150 TEMPERATURE (°C) 120 –50 05867-014 –0.40 –50 0 50 100 150 TEMPERATURE (°C) Figure 14. Input Bias Current vs. Temperature 05867-019 –0.35 Figure 17. PSRR vs. Temperature 40 146 144 VS = ±15V 142 VS = ±15V 140 30 ISC (mA) CMRR (dB) 138 134 134 132 VS = ±5V 20 130 128 0 50 100 150 TEMPERATURE (°C) 10 –50 05867-015 124 –50 0 50 100 150 TEMPERATURE (°C) 05867-020 VS = ±5V 126 Figure 18. Short-Circuit Current vs. Temperature Figure 15. CMRR vs. Temperature 1.4 16000 RL = 2kΩ 1.2 14000 SUPPLY CURRENT (mA) VS = ±15V 10000 8000 VS = ±5V 6000 0.8 0.6 0.4 0 50 100 TEMPERATURE (°C) 150 0 0 10 20 30 SUPPLY VOLTAGE (V) Figure 19. Supply Current vs. Supply Voltage Figure 16. Open-Loop Gain vs. Temperature Rev. A | Page 8 of 16 40 05867-022 2000 –50 1.0 0.2 4000 05867-017 AVO (V/mV) 12000 OP07D 50 VS = ±15V VOH = +VOUT VS = ±15V VIN = 28mV RL = ∞ CL = 20pF 40 CLOSED-LOOP GAIN (dB) VSY – VOUT (V) G = +100 VOL = –VOUT 1 30 G = +10 20 10 G = +1 0 0.1 1 10 100 ILOAD (mA) –10 100 05867-023 0.1 0.01 1k 10k 100k Figure 20. Output Voltage Swing vs. Load Current Figure 23. Closed-Loop Gain vs. Frequency 10 50 VS = ±5V VS = ±5V VIN = 28mV RL = ∞ CL = 20pF G = +100 CLOSED-LOOP GAIN (dB) 40 VSY – VOUT (V) 1M FREQUENCY (Hz) 05867-026 10 VOL = –VOUT 1 VOH = +VOUT 30 G = +10 20 10 G = +1 1 10 100 ILOAD (mA) –10 100 80 40 GAIN 0 20 1k 10k 100k 1M FREQUENCY (Hz) 0 10M GAIN 20 15 10 5 05867-025 VS = ±15V RL = ∞ CL = 20pF ΦM = 80° –40 100 +OS OVERSHOOT (%) 60 –OS PHASE MARGIN (Degrees) 60 –20 VS = ±15V VIN = ±50mV G = +1 25 20 1M 30 80 40 100k Figure 24. Closed-Loop Gain vs. Frequency 100 PHASE 10k FREQUENCY (Hz) Figure 21. Output Voltage Swing vs. Load Current 100 1k Figure 22. Open-Loop Gain and Phase vs. Frequency 0 0 2 4 6 8 CLOAD (nF) Figure 25. Overshoot vs. Capacitive Load Rev. A | Page 9 of 16 10 12 05867-028 0.1 05867-024 0.1 0.01 05867-027 0 OP07D 30 100 VS = ±5V VIN = ±50mV G = +1 25 –OS +OS VS = ±15V VIN = 28mV RL = ∞ CL = 20pF 10 ROUT (Ω) OVERSHOOT (%) G = +100 20 15 G = +10 G = +1 10 1 0 2 4 6 8 10 12 CLOAD (nF) 0.1 10 05867-029 0 100 1k 10k 100k 1M FREQUENCY (Hz) Figure 26. Overshoot vs. Capacitive Load 05867-032 5 Figure 29. Output Impedance vs. Frequency 100 112 VS = ±15V 110 VS = ±5V VIN = 28mV RL = ∞ CL = 20pF 108 G = +100 106 ROUT (Ω) CMRR (dB) 10 104 G = +10 102 1 G = +1 100 10k 100k 1M FREQUENCY (Hz) 0.1 10 100 Figure 27. CMRR vs. Frequency 100 VOLTAGE NOISE DENSITY (nV/ Hz) –PSRR 60 40 +PSRR 20 1k 10k FREQUENCY (Hz) 100k 1M 05867-031 PSRR (dB) 80 100 10k 100k 1M Figure 30. Output Impedance vs. Frequency 100 0 10 1k FREQUENCY (Hz) Figure 28. PSRR vs. Frequency VS = ±15V 10 1 0.1 1 10 100 FREQUENCY (Hz) Figure 31. Voltage Noise Density vs. Frequency Rev. A | Page 10 of 16 1k 05867-034 1k 05867-030 96 100 05867-033 98 OP07D 10 in (pA/ Hz) 1 0.01 0.1 1 10 100 2 05867-035 0.1 VS = ±5V CL = 1nF G = +1 VIN = 4V p-p 1k FREQUENCY (Hz) 05867-039 OUTPUT VOLTAGE (1V/DIV) VS = ±15V TIME (100µs/DIV) Figure 32. Current Noise Density vs. Frequency Figure 35. Large-Signal Transient OUTPUT VOLTAGE (100mV/DIV) 400mV VS = ±5V AND ±15V CL = 1nF G = +1 VIN = 100mV p-p 200mV VIN VS = ±15V VIN = 200mV G = –100 RECOVERY = 1µs 0V –200mV 0V 2 –5V VOUT –10V 05867-040 TIME (100µs/DIV) 05867-036 –15V –20V TIME (10µs/DIV) Figure 36. Positive Overload Recovery Figure 33. Small-Signal Transient 200mV VS = ±15V CL = 1nF G = +1 VIN = 4V p-p VIN VS = ±15V VIN = 200mV G = –100 RECOVERY = 5µs 0V –200mV 15V 2 10V VOUT 5V –5V TIME (100µs/DIV) TIME (10µs/DIV) Figure 34. Large-Signal Transient Figure 37. Negative Overload Recovery Rev. A | Page 11 of 16 05867-041 0V 05867-038 OUTPUT VOLTAGE (1V/DIV) 400mV OP07D 1200mV 600mV VIN VS = ±5V VIN = 600mV G = –10 RECOVERY = 2.4µs VS = ±15V VN p-p = 0.24µV VOLTAGE NOISE (0.2µV/DIV) 0V –600mV 0V VOUT –2V –4V 1 –8V TIME (4µs/DIV) 05867-045 05867-042 –6V TIME (1s/DIV) Figure 38. Positive Overload Recovery Figure 41. Voltage Noise (0.1 Hz to 10 Hz) 1200mV 600mV VIN VS = ±5V VIN = 600mV G = –10 RECOVERY = 5.6µs 0V –600mV 4V 20kΩ VOUT – 0V 2 + 05867-043 –2V –4V TIME (4µs/DIV) 7 3 + 4 6 OUTPUT VOS TRIM RANGE IS TYPICALLY ±3.5mV V– Figure 42. Optional Offset Nulling Circuit Figure 39. Negative Overload Recovery VIN VOUT 05867-044 2 TIME (400µs/DIV) – 8 OP07D INPUT VS = ±5V VIN = ±5.7V V+ 1 Figure 40. No Phase Reversal Rev. A | Page 12 of 16 05867-049 2V OP07D OUTLINE DIMENSIONS 5.00 (0.1968) 4.80 (0.1890) 1 5 4 6.20 (0.2441) 5.80 (0.2284) 1.27 (0.0500) BSC 0.25 (0.0098) 0.10 (0.0040) 1.75 (0.0688) 1.35 (0.0532) 0.51 (0.0201) 0.31 (0.0122) COPLANARITY 0.10 SEATING PLANE 0.50 (0.0196) 0.25 (0.0099) 45° 8° 0° 0.25 (0.0098) 0.17 (0.0067) 1.27 (0.0500) 0.40 (0.0157) COMPLIANT TO JEDEC STANDARDS MS-012-AA CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. 012407-A 8 4.00 (0.1574) 3.80 (0.1497) Figure 43. 8-Lead Standard Small Outline Package [SOIC_N] Narrow Body (R-8) Dimensions shown in millimeters and (inches) 0.400 (10.16) 0.365 (9.27) 0.355 (9.02) 8 5 1 4 0.280 (7.11) 0.250 (6.35) 0.240 (6.10) 0.100 (2.54) BSC 0.060 (1.52) MAX 0.210 (5.33) MAX 0.015 (0.38) MIN 0.150 (3.81) 0.130 (3.30) 0.115 (2.92) SEATING PLANE 0.022 (0.56) 0.018 (0.46) 0.014 (0.36) 0.325 (8.26) 0.310 (7.87) 0.300 (7.62) 0.195 (4.95) 0.130 (3.30) 0.115 (2.92) 0.015 (0.38) GAUGE PLANE 0.005 (0.13) MIN 0.014 (0.36) 0.010 (0.25) 0.008 (0.20) 0.430 (10.92) MAX COMPLIANT TO JEDEC STANDARDS MS-001 CONTROLLING DIMENSIONS ARE IN INCHES; MILLIMETER DIMENSIONS (IN PARENTHESES) ARE ROUNDED-OFF INCH EQUIVALENTS FOR REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN. CORNER LEADS MAY BE CONFIGURED AS WHOLE OR HALF LEADS. Figure 44. 8-Lead Plastic Dual In-Line Package [PDIP] (N-8) Dimensions shown in inches and (millimeters) Rev. A | Page 13 of 16 070606-A 0.070 (1.78) 0.060 (1.52) 0.045 (1.14) OP07D ORDERING GUIDE Model 1 OP07DNZ OP07DRZ OP07DRZ-REEL OP07DRZ-REEL7 1 Temperature Range −40°C to +125°C −40°C to +125°C −40°C to +125°C −40°C to +125°C Package Description 8-Lead PDIP 8-Lead SOIC_N 8-Lead SOIC_N 8-Lead SOIC_N Z = RoHS Compliant Part. Rev. A | Page 14 of 16 Package Option N-8 R-8 R-8 R-8 OP07D NOTES Rev. A | Page 15 of 16 OP07D NOTES © 2005–2011 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D05867–0–2/11(A) Rev. A | Page 16 of 16