REF-01/REF-02
Precision
Voltage References
FEATURES
DESCRIPTION
n
The REF-01/REF-02 are precision 10V and 5V bandgap
references which provide stable output voltages over a
wide range of operating conditions. Output voltage is accurate to ±0.3% with a low 5ppm/°C typical temperature
coefficient. The REF-01 and REF-02 are excellent choices
for applications where low drift, moderate accuracy, low
power consumption and low cost are considerations.
n
n
n
n
n
Trimmed Output ±0.3%
Low Drift—5ppm/°C Typ
Low Noise—3ppm(P-P)
High Line Rejection
Temperature Output—REF-02
Low Supply Current 1.4mA Max
APPLICATIONS
n
n
n
n
n
The REF-02 includes a temperature output pin which
provides a linear voltage proportional to absolute temperature.
A/D and D/A Converters
Precision Regulators
Constant Current Sources
V/F Converters
Bridge Excitation
For lower drift and higher accuracy references, please see
the LT1019 and LT1021 data sheets.
L, LT, LTC and LTM are registered trademarks of Linear Technology Corporation. All other
trademarks are the property of their respective owners.
TYPICAL APPLICATION
Ultra Linear Strain Gauge Amplifier
REF-02
OUT
GND
350Ω
BRIDGE
A1†
LT307
R2
20k
R4
20k
–
ACTIVE
ELEMENT
R5
2M
–
A2
LT1001
GAIN = 100
+
R6
2M**
TA01a
–5V
*REDUCES REFERENCE AND AMPLIFIER LOADING.
**IF R6 = R3, BRIDGE IS NOT LOADED BY R2 AND R4.
†
A1 VOS AND DRIFT ARE NOT CRITICAL.
357Ω*
1/2W
–15V
OUTPUT VOLTAGE (NORMALIZED)
IN
1.003
R3
2M
5V
+
412Ω*
1/2W
15V
Output Voltage Temperature Drift
1.002
0°C TO 70°C BOX GUARANTEED FOR
REF-01E AND REF-02E (8.5ppm/°C)
1.001
1.000
0.999
0.998
FULL TEMP RANGE BOX GUARANTEED FOR
REF-01A AND REF-02A (8.5ppm/°C)
0.997
–50 –25
50
25
75
0
TEMPERATURE (°C)
100
125
TA01b
ref012fd
1
REF-01/REF-02
ABSOLUTE MAXIMUM RATINGS
REF-01/REF-02 A, E, H .............................................40V
REF-01C/REF-02C.....................................................30V
Power Dissipation .............................................. 500mW
Output Short-Circuit Duration
To Ground .................................................... Indefinite
To VIN ≤ 16V ................................................ Indefinite
To VIN > 16V ............................................Not Allowed
Storage Temperature Range ..................– 65°C to 150°C
Operating Temperature
REF-01/REF-02, REF-01A/REF-02A... –55°C to 125°C
REF-01E/REF-02E, REF-01H/REF-02H,
REF-01C/REF-02C, REF-01D/REF-02D .... 0°C to 70°C
Lead Temperature (Soldering, 10 sec)................... 300°C
PIN CONFIGURATION
TOP VIEW
TOP VIEW
NC*
NC* 1
8
NC*
INPUT 2
7
NC*
TEMP** 3
6
OUTPUT
GND 4
5
TRIM
8
7 NC*
NC* 1
A
INPUT 2
–
B
+ +
–
6 OUTPUT
5 TRIM
TEMP** 3
4
GND (CASE)
N8 PACKAGE
8-LEAD PLASTIC DIP
H PACKAGE
8-LEAD TO-5 METAL CAN
TJMAX = 150°C, θJA = 150°C/W, θJC = 45°C/W
*INTERNALLY CONNECTED. DO
NOT CONNECT EXTERNALLY.
**DO NOT CONNECT ON REF-01
TJMAX = 100°C, θJA = 130°C/W
*INTERNALLY CONNECTED. DO
NOT CONNECT EXTERNALLY.
**DO NOT CONNECT ON REF-01
J8 PACKAGE
8-LEAD CERDIP
TJMAX = 150°C, θJA = 100°C/W
ORDER INFORMATION
LEAD FREE FINISH
PART MARKING
PACKAGE DESCRIPTION
TEMPERATURE RANGE
REF01EN8#PBF
REF01EN8
8-Lead Plastic Dip
0°C to 70°C
REF01HN8#PBF
REF01HN8
8-Lead Plastic Dip
0°C to 70°C
REF01CN8#PBF
REF01CN8
8-Lead Plastic Dip
0°C to 70°C
REF02EN8#PBF
REF02EN8
8-Lead Plastic Dip
0°C to 70°C
REF02HN8#PBF
REF02HN8
8-Lead Plastic Dip
0°C to 70°C
REF02CN8#PBF
REF02CN8
8-Lead Plastic Dip
0°C to 70°C
REF02DN8#PBF
REF02DN8
REF01AH#PBF
8-Lead Plastic Dip
0°C to 70°C
8-Lead TO-5 Metal Can
–55°C to 125°C
REF01H#PBF
8-Lead TO-5 Metal Can
–55°C to 125°C
REF01EH#PBF
8-Lead TO-5 Metal Can
0°C to 70°C
REF01HH#PBF
8-Lead TO-5 Metal Can
0°C to 70°C
REF01CH#PBF
8-Lead TO-5 Metal Can
0°C to 70°C
REF02H#PBF
8-Lead TO-5 Metal Can
–55°C to 125°C
REF02EH#PBF
8-Lead TO-5 Metal Can
0°C to 70°C
REF02HH#PBF
8-Lead TO-5 Metal Can
0°C to 70°C
REF02CH#PBF
8-Lead TO-5 Metal Can
0°C to 70°C
ref012fd
2
REF-01/REF-02
ORDER INFORMATION
LEAD FREE FINISH
PART MARKING
PACKAGE DESCRIPTION
TEMPERATURE RANGE
REF02DH#PBF
8-Lead TO-5 Metal Can
0°C to 70°C
REF01EJ8#PBF
8-Lead Cerdip
0°C to 70°C
REF01HJ8#PBF
8-Lead Cerdip
0°C to 70°C
REF01CJ8#PBF
8-Lead Cerdip
0°C to 70°C
REF02EJ8#PBF
8-Lead Cerdip
0°C to 70°C
REF02HJ8#PBF
8-Lead Cerdip
0°C to 70°C
REF02CJ8#PBF
8-Lead Cerdip
0°C to 70°C
REF02DJ8#PBF
8-Lead Cerdip
0°C to 70°C
OBSOLETE
Consider the N Package for Alternate Source
LEAD BASED FINISH
PART MARKING
PACKAGE DESCRIPTION
TEMPERATURE RANGE
REF02AH
REF02AH
8-Lead TO-5 Metal Can
–55°C to 125°C
REF02AJ8
REF02AJ8
8-Lead Cerdip
–55°C to 125°C
Consult LTC Marketing for parts specified with wider operating temperature ranges.
For more information on lead free part marking, go to: http://www.linear.com/leadfree/
For more information on tape and reel specifications, go to: http://www.linear.com/tapeandreel/
ELECTRICAL CHARACTERISTICS
VIN = 15V, TA = 25°C unless otherwise noted.
REF-01A/E, REF-02A/E
MIN
TYP
MAX
REF-01H, REF-02H
MIN
TYP
MAX
REF-01
REF-02
9.97
4.985
10
5
9.95
4.975
10
5
RP = 10kΩ
REF-01
REF-02
±3
±3
5, –27
5, –13
±3
±3
5, –27
5, –13
0.1Hz to 10Hz (Note 7)
REF-01
REF-02
SYMBOL
PARAMETER
CONDITIONS
VO
Output Voltage
IL = 0mA
Output Adjustment Range
enP-P
Output Voltage Noise
VIN
Input Voltage Range
ΔVOUT
ΔVIN
Line Regulation
(Note 2)
(VOUT + 3V) ≤ VIN ≤ 33V
ΔVOUT
ΔIOUT
Load Regulation
(Note 2)
IL = 0mA to 10mA
IQ
Quiescent Supply Current
No Load
IOUT
Load Current
Sink Current
ISC
Short-Circuit Current
VO = 0V
VT
Temperature Voltage Output
(Note 3)
REF-01
REF-02
10.03
5.015
20
10
12
7
REF-01
REF-02
10
–0.3
REF-02 Only
10.05
5.025
12
7
V
V
%
%
20
10
40
40
UNITS
μVP-P
μVP-P
40
40
V
V
0.0001
0.01
0.0001
0.01
%/V
0.0005
0.001
0.008
0.01
0.0005
0.001
0.01
0.01
%/mA
%/mA
0.65
1.4
0.65
1.4
mA
20
–20
10
–0.3
20
–20
mA
mA
25
25
mA
620
620
mV
VIN = 15V, TA = 25°C unless otherwise noted.
REF-01C, REF-02C
MIN
TYP
MAX
MIN
REF-01
REF-02
9.9
4.95
10
5
4.9
5
RP = 10kΩ
REF-01
REF-02
±2.7
5, –27
5, –13
±2
5, –13
0.1Hz to 10Hz (Note 7)
REF-01
REF-02
SYMBOL
PARAMETER
CONDITIONS
VO
Output Voltage
IL = 0mA
Output Adjustment Range
enP-P
Output Voltage Noise
30
12
10.1
5.05
REF-02D
TYP
MAX
12
5.1
UNITS
V
V
%
%
μVP-P
μVP-P
ref012fd
3
REF-01/REF-02
ELECTRICAL CHARACTERISTICS
VIN = 15V, TA = 25°C unless otherwise noted.
REF-01C, REF-02C
MIN
TYP
MAX
SYMBOL
PARAMETER
CONDITIONS
ΔVOUT
ΔVIN
Line Regulation
(Note 2)
(VOUT + 3V) ≤ VIN ≤ 33V
0.0001 0.015
ΔVOUT
ΔIOUT
Load Regulation
(Note 2)
IL = 0mA to 8mA
IL = 0mA to 4mA
0.0005 0.015
IQ
Quiescent Supply Current
No Load
IOUT
Load Current
Sink Current
ISC
Short-Circuit Current
VO = 0V
VT
Temperature Voltage Output
(Note 3)
0.65
8
–0.2
REF-02 Only
MIN
1.6
20
20
8
–0.2
REF-02D
TYP
MAX
UNITS
0.0001
0.04
%/V
0.001
0.04
%/mA
%/mA
0.65
2
mA
20
20
mA
mA
25
25
mA
620
620
mV
The l denotes the specifications which apply over the full operating temperature range, otherwise specifications are at TA = 25°C.
VIN = 15V, –55°C ≤ TA ≤ ±125°C for REF-01A/REF-02A and REF-01/REF-02, 0°C ≤ TA ≤ 70°C for REF-01E/REF-02E and
REF-01H/REF-02H, IL = 0mA unless otherwise noted.
REF-01A/E, REF-02A/E
MIN
TYP
MAX
REF-01H/ REF-02H
MIN
TYP
MAX
l
l
0.02
0.09
0.06
0.15
0.035
0.144
0.17
0.45
(Note 6)
l
5
8.5
8
25
Change in VO Temperature
Coefficient With Output
Adjustment
RP = 10kΩ
l
0.5
ΔVOUT
ΔVIN
Line Regulation
(VOUT + 3V) ≤ VIN ≤ 33V (Note 2)
0°C ≤ TA ≤ 70°C
–55°C ≤ TA ≤ 125°C
l
l
0.0001
0.0001
0.012
0.015
0.0001
0.0001
0.012
0.015
%/V
%/V
ΔVOUT
ΔIOUT
Load Regulation
(IL = 0mA to 8mA) (Note 2)
0°C ≤ TA ≤ 70°C
–55°C ≤ TA ≤ 125°C
l
l
0.002
0.002
0.01
0.012
0.002
0.002
0.012
0.015
%/mA
%/mA
Temperature Voltage Output
Temperature Coefficient
(Note 3) REF-02
l
2.1
SYMBOL
PARAMETER
CONDITIONS
ΔV
ΔT
Output Voltage Change With
Temperature (Notes 4, 5)
0°C ≤ TA ≤ 70°C
–55°C ≤ TA ≤ 125°C
TC
Output Voltage Temperature
Coefficient
0.5
UNITS
%
%
ppm/°C
ppm/%
2.1
mV/°C
The l denotes the specifications which apply over the full operating temperature range, otherwise specifications are at TA = 25°C.
VIN = 15V, 0°C ≤ TA ≤ 70°C and IL = 0mA unless otherwise noted.
REF-01C, REF-02C
MIN
TYP
MAX
MIN
REF-02D
TYP
MAX
SYMBOL
PARAMETER
CONDITIONS
ΔV
ΔT
Output Voltage Change With
Temperature
(Notes 4, 5)
l
TC
Output Voltage Temperature
Coefficient
(Note 6)
l
8
Change in VO Temperature
Coefficient With Output
Adjustment
RP = 10kΩ
l
0.5
ΔVOUT
ΔVIN
Line Regulation
(Note 2)
VIN = 8V to 30V
l
0.0001
0.018
0.0001
0.05
%/V
ΔVOUT
ΔIOUT
Load Regulation
(Note 2)
IL = 0mA to 5mA
l
0.002
0.018
0.002
0.05
%/mA
Temperature Voltage Output
Temperature Coefficient
(Note 3) REF-02
l
2.1
0.45
65
8
%
250
ppm/°C
0.5
2.1
UNITS
1.7
ppm/%
mV/°C
ref012fd
4
REF-01/REF-02
ELECTRICAL CHARACTERISTICS
Note 1: Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to any Absolute
Maximum Rating condition for extended periods may affect device
reliability and lifetime.
Note 2: Line and load regulation specifications include the effect of self
heating.
Note 3: Limit current in or out of Pin 3 to 50nA and capacitance on Pin 3
to 30pF.
Note 4: ΔV is defined as the absolute difference between the maximum
output voltage and the minimum output voltage over the specified
temperature range expressed as a percentage of nominal output.
Note 5: ΔV specification applies trimmed or untrimmed.
Note 6: TC is defined as ΔV divided by the temperature range, i.e.,
TC =
ΔV
TMAX – TMIN
Note 7: 0.1Hz to 10Hz noise cannot be 100% tested on modern high speed
test equipment, so Linear Technology does not put a guaranteed maximum
specification on this parameter for standard units. 100% bench testing of
0.1Hz to 10Hz noise is available on special request. To ensure low output
noise, Linear Technology does 100% test 10Hz to 1kHz noise. Consult
factory for details.
–V
V
ΔV = MAX MIN •100
VOUT
PACKAGE DESCRIPTION
H Package
8-Lead TO-5 Metal Can (.230 Inch PCD)
(Reference LTC DWG # 05-08-1321)
.335 – .370
(8.509 – 9.398)
DIA
.305 – .335
(7.747 – 8.509)
.040
(1.016)
MAX
.050
(1.270)
MAX
SEATING
PLANE
.165 – .185
(4.191 – 4.699)
GAUGE
PLANE
.010 – .045*
(0.254 – 1.143)
REFERENCE
PLANE
.500 – .750
(12.700 – 19.050)
.016 – .021**
(0.406 – 0.533)
.027 – .045
(0.686 – 1.143)
45°
.028 – .034
(0.711 – 0.864)
PIN 1
.230
(5.842)
TYP
.110 – .160
(2.794 – 4.064)
INSULATING
STANDOFF
*LEAD DIAMETER IS UNCONTROLLED BETWEEN THE REFERENCE PLANE
AND THE SEATING PLANE
.016 – .024
**FOR SOLDER DIP LEAD FINISH, LEAD DIAMETER IS
(0.406 – 0.610) H8 (TO-5) 0.230 PCD 0204
ref012fd
5
REF-01/REF-02
PACKAGE DESCRIPTION
J8 Package
8-Lead CERDIP (Narrow .300 Inch, Hermetic)
(Reference LTC DWG # 05-08-1110)
CORNER LEADS OPTION
(4 PLCS)
.023 – .045
(0.584 – 1.143)
HALF LEAD
OPTION
.045 – .068
(1.143 – 1.650)
FULL LEAD
OPTION
.005
(0.127)
MIN
.405
(10.287)
MAX
8
7
6
5
.025
(0.635)
RAD TYP
.220 – .310
(5.588 – 7.874)
1
.300 BSC
(7.62 BSC)
2
3
4
.200
(5.080)
MAX
.015 – .060
(0.381 – 1.524)
.008 – .018
(0.203 – 0.457)
0° – 15°
NOTE: LEAD DIMENSIONS APPLY TO SOLDER DIP/PLATE
OR TIN PLATE LEADS
.045 – .065
(1.143 – 1.651)
.014 – .026
(0.360 – 0.660)
.100
(2.54)
BSC
.125
3.175
MIN
J8 0801
ref012fd
6
REF-01/REF-02
PACKAGE DESCRIPTION
N8 Package
8-Lead PDIP (Narrow .300 Inch)
(Reference LTC DWG # 05-08-1510)
.400*
(10.160)
MAX
8
7
6
5
1
2
3
4
.255 ± .015*
(6.477 ± 0.381)
.300 – .325
(7.620 – 8.255)
.008 – .015
(0.203 – 0.381)
+.035
.325 –.015
(
8.255
+0.889
–0.381
)
.045 – .065
(1.143 – 1.651)
.130 ± .005
(3.302 ± 0.127)
.065
(1.651)
TYP
.100
(2.54)
BSC
.120
(3.048) .020
MIN
(0.508)
MIN
.018 ± .003
(0.457 ± 0.076)
N8 1002
NOTE:
1. DIMENSIONS ARE
INCHES
MILLIMETERS
*THESE DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTRUSIONS.
MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED .010 INCH (0.254mm)
ref012fd
Information furnished by Linear Technology Corporation is believed to be accurate and reliable.
However, no responsibility is assumed for its use. Linear Technology Corporation makes no representation that the interconnection of its circuits as described herein will not infringe on existing patent rights.
7
REF-01/REF-02
RELATED PARTS
PART NUMBER
DESCRIPTION
COMMENTS
LT1019
0.05%, 5ppm/°C Precision Reference
Pin Compatible With the REF-01, REF-02, Improved Specs
ref012fd
8
Linear Technology Corporation
LT 0409 REV D • PRINTED IN USA
1630 McCarthy Blvd., Milpitas, CA 95035-7417
(408) 432-1900 ● FAX: (408) 434-0507
●
www.linear.com
© LINEAR TECHNOLOGY CORPORATION 1991