2PH12UB

2.00mm PIN HEADERS Adam Technologies, Inc. INTRODUCTION Adam Tech 2PH & D2PH Series 2.0mm Pin Headers offer a full range of fine pitched headers in a variety of configurations including Single, Dual and Three rows, Straight & Right Angle in Thru-Hole or SMT mounting. Their close tolerance .020" sq. posts are smoothly finished and taper tipped to eliminate insertion damage to the PCB or mating connector. Adam Tech 2.0mm Pin Headers can be easily cut into exact sizes as required. Options include stacked insulator versions and choice of tin, gold or selective gold plating. This series is compatible with all industry standard 2.0mm pitch mating connectors. FEATURES: Single, Dual or Three Row Tin, gold or selective gold plating options Thru-hole or SMT mounting Stacked and Custom length versions available Versatile Breakaway design Hi Temp Insulator available MATING RECEPTACLES: Mates with all industry standard .050" pitch female headers SPECIFICATIONS: Material: Standard insulator: PBT, glass reinforced, rated UL94V-0 Optional Hi-Temp insulator: Nylon 6T, rated UL94V-0 Insulator Color: Black Contacts: Brass Plating: U = Gold flash (30u” optional) over nickel underplate overall SG = Gold flash (30u” optional) over nickel underplate on contact area, tin over copper underplate on tails. T = Tin over copper underplate overall Electrical: Operating voltage: 250V AC max. Current rating: 1 Amp max. Contact resistance: 20 mΩ max. initial Insulation resistance: 5000 MΩ min. Dielectric withstanding voltage: 1000V AC for 1 minute Mechanical: Mating durability: 1,000 cycles Temperature Rating: Operating temperature: -55°C to +105°C Soldering process temperature: 260°C PACKAGING: Anti-ESD plastic bags (Tape and Reel available for SMT option) APPROVALS AND CERTIFICATIONS: UL Recognized File No. E224053 UL CSA Certified File No. LR1578596 ® .079" [2.00] CENTERLINE 2PH SERIES ORDERING INFORMATION 2PH1 SERIES INDICATOR 2PH1 = 2.00mm Single Row Straight Pin Header 2PH2 = 2.00mm Dual Row Straight Pin Header 2PH1R = 2.00mm Single Row Right Angle Pin Header 2PH2R = 2.00mm Dual Row Right Angle Pin Header 40 U A PIN LENGTH A = Standard length B = Special length, customer specified defined as: tail dim/total length PLATING U = Gold plated T = Tin plated SG = Selective gold plating in contact area, tin plating on solder tails POSITIONS Single row: 1 thru 40 Dual row: 2 thru 80 ORDERING INFORMATION DUAL INSULATOR HEADERS D2PH 1 40 SG .xxx"/.xxx"/.xxx “C” DIM. “D” DIM. “E” DIM. NO. OF ROWS 1 = Single row 2 = Dual row SERIES INDICATOR D2PH = 2mm Dual Insulator Pin Header PLATING U = Gold plated T = Tin plated SG = Selective gold plating in contact area tin plating on solder tails STACKING DIMENSIONS Specified In Inches As: “C” Dim. / “D” Dim. / “E” Dim. Replace “D” Dim. with “SMT” for Surface Mount Option HI-TEMP INSULATOR AVA I L A B L E Pb ® ® E DCOMPLIANT 2002 / 95 / EC 2002 RoHS V POSITIONS Single row: 2 thru 40 Dual row: 4 thru 80 OPTIONS: Add designator(s) to end of part number SMT = Surface Mount leads Dual Row SMT-A = Surface Mount leads Type A SMT-B = Surface Mount Leads Type B RoHS COMPLIANT HT = Hi-Temp insulator for Hi-Temp soldering processes up to 260°C (Add this option for thru-hole products only. All SMT products are manufactured with Hi-Temp insulators) L = Low profile 1.5mm insulator thickness P = Locating pegs BR = Board retention sold 246 909 Rahway Avenue • Union, New Jersey 07083 • T: 908-687-5000 • F: 908-687-5710 • WWW.ADAM-TECH.COM