ADL945PC-L2400

PC/104-PLUS Intel® Core™2 Duo / Core™Duo / Core™Solo: 1.0GHz - 2.16GHz Features • Intel® Core™2 Duo / Core™Duo / Core™Solo • • • • • • • • • • • • • 1.0GHz - 2.16GHz Power Management 256MB - 2048MB DDR2-DRAM CRT / LCD interface on-board 10/100 Base-T LAN-Ethernet 1000 Base-T LAN-Ethernet 6x USB2.0 Ports PATA Hard Disk Interface COM1, COM2, LPT1 RTC and Watchdog Timer Non Volatile Setup Save Single 5VDC Power Supply 2x SATA ADL945PC Ordering Information Item Codes ADL945PC-T7400 ADL945PC-L7400 ADL945PC-L2400 ADL945PC-U2500 ADL945PC-440CM ADL945PC-423CM Description Description Dual Core (2) 2.16GHz, 4M cache Dual Core (2) 1.5GHz, 4M cache Dual Core 1.66GHz, 2M cache Dual Core 1.2GHz, 2M cache Single Core 1.86GHz, 1M cache Single Core 1.07GHz, 1M cache* * Long lead-time may apply to this item Part# 292115 292116 292113 292112 292111 292110 The ADL945PC is based on the Intel® Core™2 Duo / Core™Duo / Core™Solo Processors, with clock speeds up to 2.16GHz, and the Intel® 945GM chipset, The Intel® Generation 3.5 graphics engine is integrated into the chipset, along with the Intel® Graphics Media Accelerator 950 (Intel® GMA 950), and can drive either a CRT and/or LVDS LCD. The memory is added by way of a SODIMM200 socket and can accept up to two Gigabytes of DDR2 DRAM. The ADL945PC power management incorporates ACPI/APM functions. The standard ADL945PC also incorporates PCI/104 Bus, EIDE, 4xUSB 2.0, 2xRS232 COM ports, PS/2 Keyboard and Mouse, parallel printer, AC97 Sound, separate 10/100Mbit and Gigabit LAN, and more. ADL offers highly effective active and passive cooling solutions based on proven thermal data and mounting techniques; resulting in the least possible mechanical board stress. Please contact your Sales Engineer for detailed information on cooling solutions to fit your needs. Data subject to change without notice Thermal Solutions ADLTS2HSS 292054 Two piece heat sink set ADLTS2Pipe 293054 Patented Chassis-mounted Heat pipe ADLTS2HSS-Fan 293052 Fan for two piece heat sink set Other options may be available, please contact our sales department. Standard DDR-RAM DDR2-DRAM512 DDR2-DRAM1024 DDR2-DRAM2048 996925 996025 996125 512MB 666MHz 200pin SODIMM 1024MB 666MHz 200pin SODIMM 2048MB 666MHz 200pin SODIMM Optional Cables ADL945PC-CK ADL9XX-PC 293046 100-9812 Development cable kit ADL power cable for ADL945 Individual development cables are available, please contact our sales department. Advanced Digital Logic, Inc.; 4411 Morena Blvd., Suite 101; San Diego, CA 92117-4345 Ph. 858 490-0597 F. 858 490-0599; e-mail: sales@adl-usa.com; web: www.adl-usa.com PC/104-PLUS Technical Specifications FEATURE Processor/CPU: L2-Cache: Front Side Bus: CPU-Clock: Memory 200pin DDR2 SODIMM: Video Controller: Video Memory: Video Interfaces: Video Channel 1: Video Channel 2: Real Time Clock: LAN-Controller: AC97-Controller: SMBus-Controller: USB2-Controller: Flash BIOS: BIOS: Power Management Control: EIDE-Controller: HW-Monitor: Audio Output: Audio Input: Keyboard: Mouse: COM1: COM2: LPT1: Floppy Disk: PCI-Bus: Power Supply: Power consumption: Operating Temperature: (typ. ambient) Dimensions: Weight: (gr) FUNCTION Intel® Core™2 Duo / Core™Duo / Core™Solo 2MB / 4MB 533/667 MHz 1.07GHz - 2.16GHz 256MB* - 2048MB 945GM integrated Gen 3.5 engine 8MB UMA / 224MB DVMT VGA-Analog, CRT, LVDS 2048 x 1536 1600 x 1200 Yes INTEL – ICH7M – ext. PHY 82562GZ INTEL – ICH7M – AC97 V2.3 INTEL – ICH7M – SMBus 6 Ports V2.0 512KB Award ACPI / APM REMARKS OPTIONS CPU dependent CPU dependent U2500 - 533FSB / L2400, L7400, T7400 - 667FSB *256MB available by special request only. Intel® Graphics Media Accelerator 950 (Intel® GMA 950) External Battery Required for RTC Intel 573E for 10/100/1000 ALC655 Codec 5.1 Sound PIO 1-4, UDMA 100*/66*/33 as well as SATA1/2 Primary Master/Slave Winbond W83627HF Stereo Output and SPDif Stereo-Line, Mic and SPDif PS/2-USB PS/2-USB RS232 RS232 Uni/ECP/EPP Available V2.2 5volt +/-5% 2.5 Amps - 11 Amps max @ +5V -25°C to +60°C 4.550” x 3.775” 93 g Shared with FDC Shared LPT port Support For 4 Masters ADL PS104CF possible CPU dependent -40°C to +85°C available upon request *requires 80 conductor cable 5.1 Support Spec: PC/104 Plus V2.0 HPS3512 or HPSC104-SER Provided CPU is kept below 100°C at all times with sufficient thermal path to dissipate Data subject to change without notice Advanced Digital Logic, Inc.; 4411 Morena Blvd., Suite 101; San Diego, CA 92117-4345 Ph. 858 490-0597 F. 858 490-0599; e-mail: sales@adl-usa.com; web: www.adl-usa.com