MSMT3XEN

MICROSPACE PC/104 Pentium CPU 400 / 650MHz MSMT3XEG/MSMT3SEG/MSMT3SEN/MSMT3XEN Feature • • • • • • • • • • • • • • • INTEL Tualatin Celeron processor 400 / 650MHz 256KB - 2nd level Cache Power Management 64-256SDRAM or soldered 64 MB SDRAM CRT/LCD on-board 100/10Base-T LAN-Ethernet E-IDE (1.8”/2.5” drives) Hard Disk Interface 2x USB COM1, COM2, COM3, COM4, LPT1 RTC and Watchdog Timer EEPROM Single 5V Power Supply PC/104 (ISA) BUS PC/104+ BUS optional Picture is representative Ordering Information MSMT3XEG MSMT3SEG MSMT3SEN MSMT3XEN Description The MSMT3SEG/XEG/ base board in conjunction with a SmartCoreT3, integrates all standard functions of a PC, including CRT/LCD (XEG/SEG) and USB (1.1) on one PC/104+ board. The SmartCore T3 is based on the Intel PentiumIII Tualatin Processor, at 400 or 650MHz. Additional expansion cards can be added using the PC/104 (ISA) with full 16 Bit support and/or PC/104+ (PCI) connectors with. This CPU can have up to 256MB SDRAM (SEN/ SEG) or 64MB soldered (XEG/XEN) onto the board for more rugged applications. The CPU can be booted from USB, IDE, Compact Flash or floppy drive. The CPU can run on most operating systems such as DOS, Windows, Linux versions, as well as OS/2 and real time operating systems. The on board video feature allows for simultaneous operation of the CRT and LCD. ADL offers a service to adapt flat panels to our CPUs. Non Video Boards are available for “headless” applications (XEN/ SEN). Item Codes 801895 801870 801872 801972 805145 805146 805149 807008 807006 807005 801375 Part# Options SmartCoreT3-650C SmartCoreT3-400 SmartCoreT3-400C -CF -L+ -P+ MSMSEG-DVI-CON Baseboard with LAN, Video, 64MB soldered SDRAM Baseboard with LAN, Video, 0MB SDRAM Baseboard with LAN, no Video, 0MB SDRAM Baseboard with LAN, no Video, 64MB soldered SDRAM Description Choose one smartCore smartCore (Tualatin) 650MHz smartCore 400MHz (with passive cooler) smartCore 400MHz (with heat spreader) Compact Flash Socket (not with L+) PC/104-plus Connector (long, stack-through) PC/104-plus Connector (short) Adapter board for DVI-D or TV out with cable (XEG/SEG) Standard SDRAM SDRAM64-PS 990615 SDRAM 144pin, 64MB (-25C to +70C) SDRAM128-PS 990725 SDRAM 144pin, 128MB (-25C to +70C) SDRAM256-PS 990823 SDRAM 144pin, 256MB (-25C to +70C) Extended Temperature Range SDRAM SDRAM64-PE 990618 Enh. SDRAM 144pin, 64MB (-40C/+85C) SDRAM128-PE 990728 Enh. SDRAM 144pin, 128MB (-40C/+85C) SDRAM256-PE 990826 Enh. SDRAM 144pin, 256MB (-40C/+85C) Options for Cables and accessories Assembly-Kit 710460 4 PC/104 Std. Strand-off posts, Hex nuts, screws *More options may be available, please contact our Sales Office * Data subject to change without notice Advanced Digital Logic, Inc.; 4411 Morena Blvd., Suite 101; San Diego, CA 92117-4345 Ph. 858 490-0597 F. 858 490-0599; e-mail: sales@ad-usa.com; web: www.adl-usa.com MICROSPACE PC/104 Feature Technical Specifications FEATURES Item code CPU 2nd Level Cache Performance (MHz) DRAM Min-Max (MB) Power Management DiskOnChip Socket CompactFlash Socket Mouse, Keyboard Floppy Interface IDE Interface Onboard IDE-Flash COM1 COM2 COM3 COM4 LPT1 USB LAN Audio Video Controller Video Datapath Video Memory CRT Video LCD Interface LCD Resolution Video Input EEPROM Support Watchdog Power Normal (typ) Power Suspend Cooling Type Operating Temp. Extended Temp. Weight (gr) MTBF FUNCTIONS MSMT3SEG SmartCoreT3 256kB 400 or 650 SODIMM 64-256 SDRAM — — optional yes optional CF yes (PCI) — RS232C RS232C RS232C (422/485 optional) RS232C (422/485 optional) yes 2 (V1.1) 100/10BASE-T — ATI M1 PCI 8 MB yes (VGA) 24 Bit TFT 3V 1280 x 1024 x 256 — yes yes 5V/~2.6A (@32/400) 5V/~0.6A (@32/400) passive/active -25°C to +60°C -40°C to +85°C * 170 > 200’000 h FUNCTION MSMT3XEG SmartCoreT3 256kB 400 or 650 soldered 64 MB SDRAM — — optional yes optional CF yes (PCI) — RS232C RS232C RS232C (422/485 optional) RS232C 422/485 optional) yes 2 (V1.1) 100/10BASE-T — ATI M1 PCI 8 MB yes (VGA) 24 Bit TFT 3V 1280 x 1024 x 256 — yes yes 5V/~2.6A (@32 MB) 5V/~0.6A (@32 MB/400) passive/active -25°C to +50°C -40°C to +85°C * 170 > 200’000 h FUNCTION MSMT3SEN SmartCoreT3 256kB 400 or 650 SODIMM 64-256 SDRAM — — optional yes optional CF yes (PCI) — RS232C RS232C RS232C (422/485 optional) RS232C (422/485 optional) yes 2 (V1.1) 100/10BASE-T — — — — — — — — yes yes 5V/~2.49A (@64/400) 5V/~0.51A (@32/400) passive/active -25°C to +50°C -40°C to +85°C * 170 > 200’000 h FUNCTION MSMT3XEN SmartCoreT3 256kB 400 or 650 soldered 64 MB SDRAM — — optional yes optional CF yes (PCI) — RS232C RS232C RS232C (422/485 optional) RS232C (422/485 optional) yes 2 (V1.1) 100/10BASE-T — — — — — — — — yes yes 5V/~2.49A (@64/400) 5V/~0.51A (@32/400) passive/active -25°C to +50°C -40°C to +85°C * 170 > 200’000 h * In the final installation, the thermal path must provide sufficient cooling to keep the CPU (T-junction) below the 100°C (max). The BIOS setting of the LM75 may have to be adjusted (standard setting on 85°C). Please contact your sales representative for more information. Data subject to change without notice Advanced Digital Logic, Inc.; 4411 Morena Blvd., Suite 101; San Diego, CA 92117-4345 Ph. 858 490-0597 F. 858 490-0599; e-mail: sales@ad-usa.com; web: www.adl-usa.com