1D15-N1

ULTRAVOLT D SERIES MICRO-SIZED HIGH VOLTAGE BIASING SUPPLIES The UltraVolt© D series of high voltage power supplies is designed to meet the needs of customers with low-profile, < 13 mm (< 0.511") or < 17.5 mm (< 0.689") applications at 1 to 6 W. These ultra-compact modules are ideal for detectors that require high-bias voltages and currents at low ripple. D series PCB-mount high voltage power supplies feature a lightweight design, state-of-the-art surface-mount technology, and five-sided metal enclosures. PRODUCT HIGHLIGHTS TYPICAL APPLICATIONS  4 models from 0 to 1 kV through  Scanning electron microscopes 0 to 6 kV (SEM)  Photo multiplier tubes (PMT)  Photodiodes (PD)  1, 2, 4 or 6 W output power  Mass spectrometry  Multi-pixel photon counters (MPPC)  Low ripple (< 0.02% peak to peak)  Gas chromatography  Channel electron multipliers  Tight line/load regulation  Spectrometers  Silicon detectors (SiD)  Output current limit protection  Electrostatic chuck (e-chuck)  Silicon photomultipliers (SiPM)  Adjustable from 0 to full output  PZT drivers  Image intensifiers (II and IIT)  Buffered voltage  Pulse generators  Microchannel plates (MCP)  Laser electro-optic modulation  15 or 24 VDC Input  Ionization chamber detectors  Fiber-optic telecom detectors  Low profile and lightweight  Thin-film bias  Particle physics detectors  PCB flat mounting  High voltage testing  Laser range finder detectors  ATE leakage testing  Detectors  General laboratory  Geiger-Muller tubes (GM)  Bias supplies and current monitoring  Avalanche photo diodes (APD) ©2020 Advanced Energy Industries, Inc. ULTRAVOLT D SERIES ELECTRICAL SPECIFICATIONS Parameters Specifications Units Input Voltage Vin (Pins 2 and 3) 15 VDC ±1.5 V or 24 VDC ±2 V, according to type VDC Input Current Example for a 15 VDC, output 6000 V, 1 mA model: inhibition mode: 27 mA at no load and HV = 6000 V 46 mA, at full load < 630 mA Polarity Fixed positive or negative Output Voltage 0 to 1000 - 0 to 2000 0 to 4000 2 0 to 6000 Output Power 1 2 4 6 1 2 4 6 1 Output Current 1 2 4 6 0.5 1 2 3 0.25 0.5 Programming (Pins 4 and 6) Via external voltage source 0 to +5 V ±0.1% at full scale, and input impedance = 94 kΩ - Max Output Current Iout Limited to 110% of nominal current - Load Voltage Regulation ±0.01% of full output voltage for no load to full load VDC Line Voltage Regulation ±0.01% of full output voltage over specified input voltage range VDC Residual Ripple < 0.02% at full load V pk to pk Temperature Coefficient 100 PPM/°C Output HV Monitoring (Pin 7) {still operating in inhibition mode} Analog 0 to +5 V buffered output signal, accuracy ±0.2% - Output Current Monitoring (Pin 5) {still operating in inhibition mode} Analog 0 to +5 V buffered output signal, accuracy ±2% HV ON/OFF (Pin 1) To disable (opened remote interlock) or enable (closed remote interlock) - Operating Temperature -10 to +65, full load, max Eout, Tcase temp °C Storage Temperature -10 to +70 °C Safeguards Protected against reverse Vin - 1 0.17 0.33 0.67 1 4 6 W mA - Output impedance = 1 kΩ Temperature coefficient: 100 ppm/°C HV setting internally limited to 5.3 V advancedenergy.com 6 1.5 Temperature coefficient: 50 ppm/°C for ≤ 4 kV units, 100 ppm/°C for 6 kV units Auto inhibition if case > 75°C 2 4 1 Output impedance = 1 kΩ Soft start feature: the start is guaranteed with no overshoot 2 VDC ULTRAVOLT D SERIES MECHANICAL SPECIFICATIONS Tin steel plate, thickness 0.5 mm Insulation Fully potted in an epoxy resin 123 Volume and Weights Volume cm3 in3 1 to 4 kV, 1 to 4 W 36.2 2.21 1 to 4 kV, 6 W and 1 to 6 kV, 1 to 6 W 48.6 2.97 Weight g oz 1 to 4 kV, 1 to 4 W 72 2.54 1 to 4 kV, 6 W and 1 to 6 kV, 1 to 6 W 85 3 45 6 7 8 1 to 4 kV, 6 W and 1 to 6 kV, 1 to 6 W 123 Dimensions 1, 2 45 6 7 0.689 (17.5) Casing 0.511 (13) 1 to 4 kV, 1 to 4 W Construction 8 ±0.1 mm (0.0039") Case to Pin ±1.5 mm (0.0591") TOP VIEW 1 Standard case length, width, and height specs are 1.27 mm (0.050") 0.0248² (0.63²) 0.886 (22.5 ±0.5) 2 Pin length > 6 mm (0.24"), spacing 2.54 mm (0.1") 0.100 (2.54) 1.75 (44.45) 1.73 (44.0) ±0.3 mm (0.0118") Pin to Pin 0.697 (17.7) Overall 0.125 (3.175) Tolerance 1.00 (25.4) 0.276 (7±0.5) 2.5 (63.5) INTERFACE CONTROL PARAMETERS Connections Pin Function 1 Enable/Disable 2 Power Ground 3 Positive Power Input 4 Signal Ground 5 Iout Monitor 6 Remote Adjust Input 7 Eout Monitor 8 HV Output advancedenergy.com 3 ORDERING INFORMATION Type 0 to 1000 VDC Output 1D 0 to 2000 VDC Output 2D 0 to 4000 VDC Output 4D 0 to 6000 VDC Output 6D 15 VDC Nominal 15 24 VDC Nominal 24 W Output 1 W Output 2 W Output 4 W Output 6 Case Steel, Tin-plated (Standard) Polarity Positive Output -P Negative Output -N Input Power The D series is not available in all territories. Please contact Advanced Energy for details concerning sales in your area. 6D-24-P6 Voltage Power Model Output Polarity Input Voltage PRECISION | POWER | PERFORMANCE Read and understand all documentation before you install, operate, or maintain Advanced Energy high voltage power supplies. Follow all safety instructions and precautions to protect against CAUTION: High Voltage For international contact information, visit advancedenergy.com. sales.support@aei.com +1 970 221 0108 property damage and serious or possibly fatal bodily injury. Never defeat safety interlocks or grounds. Specifications are subject to change without notice. Not responsible for errors or omissions. ©2020 Advanced Energy Industries, Inc. All rights reserved. Advanced Energy®, AE®, and UltraVolt® are U.S. trademarks of Advanced Energy Industries, Inc. ENG-HV-D-Series-235-01 01.20