AMSOP-07D

Advanced Monolithic Systems FEATURES AMSOP-07 LOW OFFSET VOLTAGE OPERATIONAL AMPLIFIER RoHS compliant APPLICATIONS • High-Gain Instrumentation • Precision Data Acquisition • Precision Integrators • Precision Threshold Detectors • Biomedical Amplifiers • Low VOS………………………………………. 75µV Max • Low VOS Drift.……………………………. 1.3µV/°C Max • Ultra Stable with Time……………… 1.5µV/Month Max • Low Noise …………………………………..0.6µVP-P Max • Wide Input Voltage Range ……………………..… ±14V • Wide Supply Voltage Range ……………… ±3V to ±18V GENERAL DESCRIPTION The AMSOP-07 is a precision operational amplifier with a very low input offset voltage. This device features a wide input voltage range of ±13V minimum, low input bias current, high impedance, high CMRR, excellent stability of offsets and gain over time and temperature. Excellent linearity can be maintained even at high closed-loop gains. Low cost, low noise, low offsets and high open-loop gain make the AMSOP-07 an excellent choice particularly for high-gain instrumentation applications. Other applications include precision data acquisition, precision integrators, threshold detectors and medical instrumentation. The AMSOP-07 is operational in the full industrial temperature range of -40°C to 85°C and is available in the 8 lead SOIC and plastic dip (PDIP) packages. ORDERING INFORMATION: TOL. PACKAGE TYPE 8 LEAD PDIP AMSOP-07EP AMSOP-07CP AMSOP-07DP 8 LEAD SOIC ±75µV AMSOP-07ES ±150µV AMSOP-07CS ±150µV AMSOP-07DS OPERATING TEMPERATURE RANGE -40 to 85° C -40 to 85° C -40 to 85° C PIN CONNECTIONS 8 Lead SOIC/ 8Lead PDIP VOS TRIM -IN +IN 1 2 3 8 VOS TRIM 7 V+ 6 OUT 5 N/C V- 4 Top View Advanced Monolithic Systems, Inc. www.advanced-monolithic.com Phone (925) 443-0722 Fax (925) 443-0723 AMSOP-07 ABSOLUTE MAXIMUM RATINGS (Note1) Supply Voltage Differential Input Voltage Input Voltage Output Short Circuit Duration Operating Temperature Range ±22V ±30V ±22V Indefinite -40°C to 85°C Storage temperature Junction Temperature Soldering information (25 sec) Thermal Resistance 8 L SOIC 8 L PDIP -65°C to +125°C +150°C 265°C 158°C/W 103°C/W ELECTRICAL CHARACTERISTICS Electrical Characteristics at VIN =±15V and TA = +25°C unless otherwise specified. Parameter Conditions AMSOP-07E AMSOP-07 C Min Typ Max Min Typ Max Input Offset Voltage Long Term VOS Stability Input Offset Current Input Bias Current Input Noise Voltage Input Noise Voltage Density Input Noise Current Input Noise CurrentDensity Input Resistance Differential-Mode Input Resistance Common-Mode Input Voltage Range Common-Mode Rejection Ratio Power Supply Rejection Ratio Large-Signal Voltage Gain VCM = ± 13 VS = ± 13 to ± 18 RL≥2kΩ, VO =± 10V RL≥500Ω, VO =± 0.5V, VS =± 0.5V (Note 5) RL ≥10kΩ RL ≥2kΩ RL ≥1kΩ RL ≥2kΩ (Note 4) AVCL =+1 (Note 6) VO = 0, IO= 0 VS =± 15V, No Load VS =± 3V, No Load RP =20kΩ 200 150 ± 12.5 ± 12.0 ± 10.5 0.1 0.4 ± 13 106 0.1Hz to 10Hz fO = 10Hz fO = 100Hz (Note 4) fO = 1000Hz 0.1Hz to 10Hz fO = 10Hz fO = 100Hz (Note 4) fO = 1000Hz (Note 5) 15 (Note 2) (Note 3) 30 0.3 0.5 ± 1.2 0.35 10.3 10.0 9.6 14 0.32 0.14 0.12 50 160 ± 14 123 5 500 400 ± 13.0 ± 12.8 ± 12.0 0.3 0.6 60 75 4 ±4 120 6 20 120 100 ± 12.0 ± 11.5 0.1 0.4 ± 13 100 75 1.5 3.8 ± 4.0 0.6 18.0 13.0 11.0 30 0.80 0.23 0.17 8 60 0.4 0.8 ± 1.8 0.38 10.5 10.2 9.8 15 0.35 0.15 0.13 33 120 ± 14 120 7 400 400 ± 13.0 ± 12.8 ± 12.0 0.3 0.6 60 80 4 ±4 150 8 32 120 ± 13 94 150 2.0 6.0 ± 7.0 0.65 20.0 13.5 11.5 35 0.90 0.27 0.18 7 AMSOP-07 D Min Typ Max 60 0.5 0.8 ± 2.0 0.38 10.5 10.3 9.8 15 0.35 0.15 0.13 31 120 ± 14 110 7 400 400 ± 13.0 ± 12.8 ± 12.0 0.3 0.6 60 80 4 ±4 150 8 32 150 3.0 6.0 ± 12 0.65 20.0 13.5 11.5 35 0.90 0.27 0.18 Units µV µV/Mo nA nA µVP-P nV/√H z pAP-P pA/√H z MΩ GΩ V dB µV/V V/mV Output Voltage Swing ± 12.0 ± 11.5 0.1 0.4 V V/µs MHz Ω Slew Rate Closed-Loop Bandwidth Open-Loop Output Resistance Power Consumption Offset Adjustment Range mW mV Advanced Monolithic Systems, Inc. www.advanced-monolithic.com Phone (925) 443-0722 Fax (925) 443-0723 AMSOP-07 ELECTRICAL CHARACTERISTICS Electrical Characteristics at VIN= ±15, at -40°C ≤ TA ≤ +85°C unless otherwise specified. Parameter Conditions AMSOP-07E AMSOP-07 C Min Typ Max Min Typ Max Input Offset Voltage Average Input Offset Voltage Drift (Note 5) Input Offset Current Average Input Offset Current Drift Input Bias Current Average Input Bias Current Drift Input Voltage Range Common-Mode Rejection Ratio Power Supply Rejection Ratio Large-Signal Voltage Gain Output Voltage Swing VCM = ± 13 VS = ± 13 to ± 18 RL≥2kΩ, VO =± 10V RL ≥2kΩ 180 ± 12.0 (Note 4) ± 13 103 (Note 4) (Note 2) Without External Trim With External Trim RP =2kΩ 45 0.3 0.3 0.9 8 ± 1.5 13 ± 13.5 123 7 450 ± 13.0 32 100 ± 12.0 130 1.3 1.3 5.3 35 ± 5.5 35 ± 13 97 85 0.5 0.4 1.6 12 ± 2.2 18 ± 13.5 120 10 400 ± 13.0 51 100 ± 12.0 250 1.8 1.6 8.0 50 ± 9.0 50 ± 13 94 AMSOP-07 D Min Typ Max 85 0.7 0.7 1.6 12 ± 3.0 18 ± 13.5 106 10 400 ± 13.0 51 250 2.5 2.5 8.0 50 ± 14 50 Units µV µV/°C µV/°C nA pA/°C nA pA/°C V dB µV/V V/mV V Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Note 2: Input Offset Voltage measurements are performed by automated test equipment approximately 0.5 seconds after application of power. Note 3: Long-Term Input Offset Voltage Stability refers to the averaged trend line of VOS vs. Time over extended periods after the first 30 days of operation. Excluding the initial hour of operation, changes in VOS during the first 30 operating days are typically 2.5µV. Parameter is sample tested. Note 4: Sample tested Note 5: Guaranteed by design. Note 6: Guaranteed but not tested. TYPICAL PERFORMANCE CHARACTERISTICS Open-Loop Gain vs Temperature 1000 OPEN-LOOP GAIN (V/mV) VS = ±15V Warm-UpDrift 25 ABSOLUTE CHANGE IN INPUT OFFSET VOLTAGE ( µ V) 20 15 OP-07C TA = 25° C VS = ±15V Input Bias Current vs Differrential Input Voltage 30 NONINVERTING INPUT BIAS CURRENT (mA) 20 10 0 -10 -20 VS = ±15V TA = 25° C AT | VDIFF | ≤ 1.0V, | IB | ≤ 7nA (OP-07C) -30 INVERTING INPUT BIAS CURRENT (mA) -20 -10 0 10 20 800 600 400 200 0 10 5 0 OP-07E -50 0 50 TEMPERATURE (° C) 100 0 4 1 2 3 5 TIME AFTER POWER SUPPLY TURN-ON (minutes) -30 30 -30 -20 -10 0 10 20 30 DIFFERENTIAL INPUT VALUE (V) Advanced Monolithic Systems, Inc. www.advanced-monolithic.com Phone (925) 443-0722 Fax (925) 443-0723 AMSOP-07 TYPICAL PERFORMANCE CHARACTERISTICS (Continued) Input Bias Current vs Temperature 4 INPUT OFFSET CURRENT ( nA) VS = ±15V Input Offset Current vs Temperature 2.5 VS = ±15V Open-Loop Gain vs Power Supply Voltage 1000 TA = 25° C INPUT BIAS CURRENT ( nA) OPEN-LOOP GAIN (V/mV) 3 2.0 1.5 1.0 0.5 OP-07E 800 600 400 200 0 2 OP-07C OP-07E OP-07C 1 0 -50 0 50 TEMPERATURE (° C) 100 0 -50 0 50 100 TEMPERATURE (° C) 0 ±5 ±10 ±15 ±20 POWER SUPPLY VOLTAGE (V) Open-Loop Frequency Response 120 VS = ±15V TA = 25° C MAXIMUM OUTPUT VOLTAGE (V) 28 PEAK-TO-PEAK AMPLITUEDE (V) 24 20 16 12 8 4 0 Maximum Output Swing vs Frequency 20 VS = ±15V TA = 25° C Maximum Output Voltage vs Load Resistance VS = ±15V TA = 25° C VIN = ±10mV OPEN-LOOP GAIN (dB) 80 15 POSITIVE SWING NEGATIVE SWING 40 10 0 5 -40 0 1 10 100 1k 10k 100k 1M 10M FREQUENCY (Hz) 1k 10k 100k FREQUENCY (Hz) 1M 0 100 1k 10k LOAD RESISTANCE TO GROUND ( Ω ) Output Short-Circuit Current vs Time 35 ABSOLUTE VALUE OF OFFSET VOLTAGE ( µ V) OUTPUT SHORT-CIRCUIT CURRENT (mA) 1. VIN (PIN 3) = -10mV, V = +15V O 2. VIN (PIN 3) = +10mV, V = -15V O Untrimmed Offset Voltage vs Temperature 85 75 VS = ±15V RS = 100Ω OP-07C 30 1 2 50 OP-07E 25 2 20 VS = ±15V TA = 25° C 1 25 0 1 2 3 4 TIME FROM OUTPUT BEING SHORTED (minutes) 15 0 -50 0 50 TEMPERATURE (° C) 100 Advanced Monolithic Systems, Inc. www.advanced-monolithic.com Phone (925) 443-0722 Fax (925) 443-0723 AMSOP-07 TEST CIRCUITS TYPICAL OFFSET VOLTAGE TEST CIRCUIT TYPICAL LOW-FREQUENCY NOISE TEST CIRCUIT 200kΩ 2.5MΩ V+ 50kΩ OP-07 + VOS = VO/4000 VO 100kΩ 100kΩ 2 3 OP-07 + 7 6 4 V- 3.3kΩ 4.7µF OUTPUT (≈10Hz FILTER) INPUT REFERRED NOISE = VO/25,000 =(5mV/cm)/25,000 = 200nV/cm OPTIONAL OFFSET NULLING CIRCUIT 20kΩ INPUT + 1 OP-07 + 4 V8 7 6 V+ 2 3 OUTPUT TYPICAL APPLICATIONS Adjustment Free Precision Summing Amplifier R4 10kΩ R1 10kΩ E1 E2 E3 R2 10kΩ R3 10kΩ 2 3 V+ V+ R1 10kΩ FD333 D1 2 6 V+ 7 OP-07 3 A2 + 4 V- Precision Absolute Value Circuit R3 10kΩ R4 10kΩ R5 10kΩ OP-07 + 7 6 4 EO EIN ±10V 2 7 OP-07 3 A1 + 4 R2 10kΩ V- 6 EO 0 TO +10V R5 2.5kΩ V- FD333 D1 VA Advanced Monolithic Systems, Inc. www.advanced-monolithic.com Phone (925) 443-0722 Fax (925) 443-0723 AMSOP07 PACKAGE DIMENSIONS inches (millimeters) unless otherwise noted. 8 LEAD SOIC PLASTIC PACKAGE (S) 0.189-0.197* (4.801-5.004) 8 7 6 5 0.228-0.244 (5.791-6.197) 0.150-0.157** (3.810-3.988) 1 2 3 4 0.053-0.069 (1.346-1.752) 0.004-0.010 (0.101-0.254) 0.008-0.010 (0.203-0.254) 0.010-0.020 x 45° (0.254-0.508) 0°-8° TYP 0.014-0.019 (0.355-0.483) 0.050 (1.270) TYP 0.016-0.050 (0.406-1.270) S (SO-8 ) AMS DRW# 042293 *DIMENSION DOES NOT INCLUDE MOLD FLASH. MOLD FLASH SHALL NOT EXCEED 0.006" (0.152mm) PER SIDE **DIMENSION DOES NOT INCLUDE INTERLEAD FLASH. INTERLEAD FLASH SHALL NOT EXCEED 0.010" (0.254mm) PER SIDE 8 LEAD PLASTIC DIP PACKAGE (P) 0.400* (10.160) MAX 8 7 6 5 0.255±0.015* (6.477±0.381) 1 2 3 4 0.045-0.065 (1.143-1.651) 0.130±0.005 (3.302±0.127) 0.300-0.325 (7.620-8.255) 0.065 (1.651) TYP 0.005 (0.127) MIN 0.100±0.010 (2.540±0.254) 0.125 (3.175) MIN 0.018±0.003 (0.457±0.076) 0.015 (0.380) MIN 0.009-0.015 (0.229-0.381) 0.325 +0.025 -0.015 (8.255 +0.635 ) -0.381 P (8L PDIP ) AMS DRW# 042294 *DIMENSIONS DO NOT INCLUDE MOLD FLASH OR PROTUSIONS. MOLD FLASH OR PROTUSIONS SHALL NOT EXCEED 0.010" (0.254mm) Advanced Monolithic Systems, Inc. www.advanced-monolithic.com Phone (925) 443-0722 Fax (925) 443-0723