LXD150-0700SH

LED Power Supplies 150W LED Power 150W LXD150H series LED Power Supply 480VAC Input LED Power Supplies LED POWER next generation power source FEATURES • High Efficiency (up to 91%) • High Input 249-528VAC • Constant Output Current • Active PFC (Typical 0.95) • IP67 Waterproof • OVP, SCP, OTP • -35 to 65°C deg operation • UL8750 Approved • EN61347-1, -2-13 compliant The LXD150H series of constant current LED power supplies operates off an input voltage of 249-528VAC making it ideal for 347VAC and 480VAC input lighting systems, such as highway lighting. The LXD150H series of constant current power supplies provides up to 4200mA of output current or 428V output voltage solutions for specific LED requirements. With industry leading efficiencies, and an extensive protection feature set, the LXD150H series provides high reliability and high performance in a compact package. The LXD150H series carries the UL and CE mark for safety and is also RoHS compliant. Model Number Output Voltage Output Current Input Voltage Efficiency LXD150-0580SH LXD150-0700SH LXD150-1050SH LXD150-1400SH LXD150-2800SH LXD150-3500SH LXD150-4200SH 129-258V 107-214V 71-142V 53-107V 27-54V 21-43V 18-36V 350mA 700mA 1050mA 1400mA 2800mA 3500mA 4200mA 249-528VAC 249-528VAC 249-528VAC 249-528VAC 249-528VAC 249-528VAC 249-528VAC 91.0% 91.0% 90.0% 90.0% 90.0% 89.0% 89.0% Input Specifications Parameter Input Voltage Range Input Frequency Range Input Current Leakage Current Inrush Current Power Factor Conditions/Description Min 249 47 277AC in, 150W output 480VAC in, 50Hz 480VAC in, 25°C, Cold Start 480VAC, 277VAC 0.90 Conditions/Description Min Nom Max 528 63 0.70 1.0 50 0.95 Units VAC Hz A mA A Nom Max ±1 ±3 Units % % ±5 5.0 10 3.0 % % pk-pk % s Output Specifications Parameter Line Regulation Load Regulation Voltage Range Output Current Range Ripple and Noise Overshoot Turn-on Delay Short Circuit Protection Over Voltage Protection Over Temp Protection See table of outputs % of Iout 20MHz Bandwidth. See Note 1 Measured at 277/480VAC and full load Auto Recovery Latching. Auto Recovery, 110°C internal component temperature 120 135 150 %Vout General Specifications Parameter Isolation Voltage Efficiency Safety MTBF Lifetime Weight Operating Temperature Storage Temperature Relative Humidity Note 1. Note 2. Conditions/Description Min Nom Max Input to Output See Note 2 3750 Input to Chassis 1500 See individual models UL8750, EN61347-1, -2-13, UL1012, CAN/CSA-C22.2 No. 223-M91, C22.2 No. 107.1-01 MIL-HDBK-217F, 480VAC input, 80% load, 25°C 132,000 480VAC input, 80% load, 45°C 56,000 1300 -35 +65 -40 +85 Non-condensing (operating) 10 100 Units VAC VAC 1 Hours Hours g °C °C %RH Output connected in parallel with 0.1uF ceramic capacitor and 10uF electrolytic capacitor. Primary to Secondary Isolation test not to be carried out on power supply. Specifications are subject to change without notice LXD150H Preliminary Datasheet 16 Mar 2012 Europe/Asia Excelsys Technologies Ltd 27 Eastgate Drive Eastgate Business Park Little Island, Cork, Ireland IRELAND North America t: +353 21 4354716 Excelsys Technologies f: +353 21 4354864 519 Interstate 30, #309 e: sales@excelsys.com Rockwall, TX 75087 USA t: (972) 771 4544 f: (972) 421 1805 e: salesusa@excelsys.com LED Power Supplies 150W EMC LED Power 150W Parameter Emissions Conducted Radiated Harmonic Distortion Flicker and Fluctuation Immunity ESD Radiated RFI Fast Transients - burst Surge Immunity Conducted RFI Power Freq Magnetic Field Voltage Dips Standard Level Units EN55015 EN55015 EN61000-3-2 EN61000-3-3 Compliant Compliant Compliant Compliant EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 EN61000-4-11 Level 3 (B) Level 2 (A)) Level 2 (B) Compliant Level 2 (A) Compliant Compliant Dimming Control Parameter 12V Output Voltage 12V Output Source Current Control Voltage (1-10V input Voltage applied on 1-10V input wire Source Current (1-10V input) Source current on 1-10V input wire Note Note Note Note Note Note Note A. B. C. D. E. F. G. Min 10.8 0 -2 0 Nom 12 Max 13.2 20 15 200 Units V mA V uA If dimming function is not used, 12V(Blk/Wht) and 1-10V(purple)wire must be connected together. Primary to Secondary Isolation test not to be carried on power supply. Load Voltage must be maintained above minimum voltage. See models for voltage range. Dimming range is 10%-100% Dimming Signal Voltage should be above 1V for linear dimming control. See Dimming Implementation diagrams for various dimming methods. Do not connect Dim - (Gray) cable to Output -V cable INPUT / OUTPUT WIRING INPUT CABLE SJTW 18AWG 3C Black (L), White(N), Green(E) 650±20mm OUTPUT CABLE SJTW 18AWG 2C Blue (-V) and Red (+V) 220±20mm DIMMING CONTROL CABLE 22AWG 3C Blk/Wht (12V), Purple (1-10V), Gray (Dim - ) 270±20mm MECHANICAL SPECIFICATIONS DC OUT(2*AWG #18) BLACK (ACL) WHITE (ACN) GREEN (GND) AC IN(3*AWG #18) RED (V+) BLUE (V-) BLK/WHT(Vaux) PURPLE(Dim+) GRAY(Dim-&Vaux Return) DIMMING CONTROL(3-AWG #22) 2 Specifications are subject to change without notice LXD150H Preliminary Datasheet 16 Mar 2012 Europe/Asia Excelsys Technologies Ltd 27 Eastgate Drive Eastgate Business Park Little Island, Cork, Ireland IRELAND North America t: +353 21 4354716 Excelsys Technologies f: +353 21 4354864 519 Interstate 30, #309 e: sales@excelsys.com Rockwall, TX 75087 USA t: (972) 771 4544 f: (972) 421 1805 e: salesusa@excelsys.com LED Power Supplies 150W LED Power 150W Dimming Implementation Diagrams (Blue) EXCELSYS LED DRIVER Blk/Wht Power Factor Characteristics Efficiency vs Load (580mA Model) 3 Specifications are subject to change without notice LXD150H Preliminary Datasheet 16 Mar 2012 Europe/Asia Excelsys Technologies Ltd 27 Eastgate Drive Eastgate Business Park Little Island, Cork, Ireland IRELAND North America t: +353 21 4354716 Excelsys Technologies f: +353 21 4354864 519 Interstate 30, #309 e: sales@excelsys.com Rockwall, TX 75087 USA t: (972) 771 4544 f: (972) 421 1805 e: salesusa@excelsys.com