LXD36-0350SW

LED Power Supplies 36W LED Power 36W LXD36 series LED Power Supply Dimmable LED Power Supplies LED POWER next generation power source FEATURES • High Efficiency (up to 90%) • Active PFC (Typical 0.95) • IP67 Waterproof • OVP, SCP, OLP, OTP • -35 to +70°C deg operation • Universal Input 90-305VAC • UL8750 recognised • EN61347-1, -2-13 compliant The LXD36 series of Dimmable LED power supplies from Excelsys Technologies can deliver up to 36W of output power in an extremely compact package size. The LXD36 series of Dimmable LED power supplies provides up to 1750mA of output current and 103V output voltage solutions for specific LED requirements. With industry leading efficiencies, and an extensive protection feature set, the LXD36 series provides high reliability and high performance in a compact package The LXD36 series carries the UL and CE mark for safety and is also RoHS compliant. Model Number Output Voltage Output Current Input Voltage Efficiency LXD36-0350SW(2) 52-103V 350mA 90-305VAC 90.0% LXD36-0450SW(2) 40-80V 450mA 90-305VAC 89.0% LXD36-0700SW(3) 26-52V 700mA 90-305VAC 88.0% LXD36-1050SW(4) 18-35V 1050mA 90-305VAC 88.0% LXD36-1400SW(4) 13-26V 1400mA 90-305VAC 87.0% LXD36-1750SW(4) 11-21V 1750mA 90-305VAC 86.0% Input Specifications Parameter Input Voltage Range Input Frequency Range Input Current Leakage Current Inrush Current Power Factor Conditions/Description Universal Input Min 90 47 100VAC in, 36W output 277VAC Input, 50Hz 230VAC in, 25°C, Cold Start 220VAC, 110VAC Nom Max 305 63 0.6 0.75 60 0.98 Nom Max ±1 ±3 0.95 Units VAC Hz A mA A Output Specifications Parameter Conditions/Description Line Regulation Load Regulation Voltage Range See individual models Output Current See individual models Output Current Tolerance Overshoot Turn-on Delay Measured at 220VAC and full load Short Circuit Protection Auto Recovery Over Temperature Protection Hiccup, Auto recovery Min ±5 10 0.5 0.3 Units % % VDC mA %/Load % s 95 110 125 °C Min 3750 1500 Nom Max Units VAC VAC % 6.0 W Hours Hours g °C °C %RH General Specifications Parameter Isolation Voltage Efficiency Safety Agency Approvals No load Power Dissipation MTBF Lifetime Weight Operating Temperature Storage Temperature Relative Humidity Note Note Note Note 1. 2. 3. 4. Conditions/Description Input to Output (See Note 1) Input to Chassis See individual models UL8750, EN61347-1, -2-13, UL1310 (See Note 2, 3 & 4) Measured at 230 Vac MIL-HDBK-217F, 110VAC input, 80% load, 25°C 110VAC input, 80% load, 45°C 88 469,000 74,000 480 -35 -40 10 Non-condensing (operating) +70 +85 100 1 Primary to Secondary Isolation test not to be carried out on power supply. Non - UL1310 Class 2 output in USA and Canada. UL1310 Class 2 output for USA only. UL1310 Class 2 outputs for USA and Canada. Specifications are subject to change without notice Europe/Asia Excelsys Technologies Ltd 27 Eastgate Drive Eastgate Business Park Little Island, Cork, Ireland IRELAND LXD36 Preliminary Datasheet 10 Mar 2012 North America t: +353 21 4354716 Excelsys Technologies f: +353 21 4354864 519 Interstate 30, #309 e: sales@excelsys.com Rockwall, TX 75087 USA t: (972) 771 4544 f: (972) 421 1805 e: salesusa@excelsys.com LED Power Supplies 36W EMC LED Power 36W Parameter Emissions Conducted Radiated Harmonic Distortion Flicker and Fluctuation Immunity ESD Radiated RFI Fast Transients - burst Conducted RFI Power Freq Magnetic Field Voltage Dips Standard Level EN55015 EN55015 EN61000-3-2 EN61000-3-3 Compliant Compliant Compliant Compliant EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-6 EN61000-4-8 EN61000-4-11 Compliant Compliant Compliant Compliant Compliant Compliant Units Dimming Control Parameter 12V Output Voltage 12V Output Source Current Control Voltage (1-10V input Voltage applied on 1-10V input wire Source Current (1-10V input) Source current on 1-10V input wire Note Note Note Note Note Note Note A. B. C. D. E. F. G. Min 10.8 0 -2 0 Nom 12 Max 13.2 20 15 200 Units V mA V uA If dimming function is not used, 12V(yellow) and 1-10V(purple)wire must be connected together. Primary to Secondary Isolation test not to be carried on power supply. Load Voltage must be maintained above minimum voltage. See models for voltage range. Dimming range is 10%-100% Dimming Signal Voltage should be above 1V for linear dimming control. See Dimming Implementation diagrams for various dimming methods. Do not connect Dim - (Gray) cable to Output -V cable INPUT / OUTPUT WIRING INPUT CABLE SJTW 18AWG 3C Black (L),White(N), Green (G)310±20mm OUTPUT CABLE SJTW 18AWG 2C Black (-V) and Red (+V) 300±20mm DIMMING CONTROL CABLE 22AWG 3C Yellow (12V), Purple (1-10V), Gray (Dim - ) 270±20mm Mechanical Outline MECHANICAL SPECIFICATIONS Dimming Control Wire (3* AWG #22) Dim+ (Purple) Dim- (Gray)) Vaux (Yellow) 2 BLACK (ACL) WHITE (ACN) GREEN (GND) AC INPUT (3*AWG #18) DC OUTPUT (2*AWG #18) RED (V+) BLACK (V-) Specifications are subject to change without notice LXD36 Preliminary Datasheet 10 Mar 2012 Europe/Asia Excelsys Technologies Ltd 27 Eastgate Drive Eastgate Business Park Little Island, Cork, Ireland IRELAND North America t: +353 21 4354716 Excelsys Technologies f: +353 21 4354864 519 Interstate 30, #309 e: sales@excelsys.com Rockwall, TX 75087 USA t: (972) 771 4544 f: (972) 421 1805 e: salesusa@excelsys.com LED Power Supplies LED Power 36W Dimming Implementation Diagrams 36W EXCELSYS LED DRIVER Efficiency vs. Load (350mA Model) Power Factor Characteristics 3 Specifications are subject to change without notice LXD36 Preliminary Datasheet 10 Mar 2012 Europe/Asia Excelsys Technologies Ltd 27 Eastgate Drive Eastgate Business Park Little Island, Cork, Ireland IRELAND North America t: +353 21 4354716 Excelsys Technologies f: +353 21 4354864 519 Interstate 30, #309 e: sales@excelsys.com Rockwall, TX 75087 USA t: (972) 771 4544 f: (972) 421 1805 e: salesusa@excelsys.com