LXD52-0350SW

LED Power Supplies LED Power 52W LXD52 series 52W LED Power Supply Dimmable LED Power Supplies LED POWER next generation power source FEATURES • High Efficiency (up to 91%) • Dimming Control • Active PFC (Typical 0.98) • IP67 Waterproof • OVP, SCP • -35 to 70°C deg operation • Universal Input 90-305VAC • UL8750 recognised • EN61347-1, -2-13 compliant Input Specifications Parameter Input Voltage Range Input Frequency Range Input Current Inrush Current Power Factor Output Specifications Parameter Line Regulation Load Regulation Voltage Range Output Current Range Output Current Ripple Overshoot Turn-on Delay Turn-on Delay Short Circuit Protection Over Voltage Protection General Specifications Parameter Isolation Voltage The LXD52 series of dimmable LED power supplies from Excelsys Technologies can deliver up to 52W of output power in an extremely compact package size. The LXD52 series of constant current power supplies provides up to 2100mA of output current and 149V output voltage solutions for specific LED requirements. With industry leading efficiencies, and an extensive protection feature set, the LXD52 series provides high reliability and high performance in a compact package The LXD52 series carries the UL and CE mark for safety and is also RoHS compliant. Model Number Output Voltage Output Current LXD52-0350SW(1) 75-149V 350mA 90-305VAC 91.0% LXD52-0700SW(1) 38-75V 700mA 90-305VAC 89.0% LXD52-0450SW(1) LXD52-1050SW(2) LXD52-1400SW(3) LXD52-2100SW(3) 58-116V 450mA 25-50V 1050mA 13-25V 2100mA 19-37V Conditions/Description Universal Input 1400mA Min 90 47 100VAC in, 52W output 230VAC in, 25°C, Cold Start 220VAC, 110VAC 90-305VAC Min See individual models See Dimming Graph on Page 3 10 Measured at 110VAC and full load Measured at 220VAC and full load Auto Recovery Hiccup, Auto recovery 90.0% 90-305VAC 89.0% 90-305VAC 89.0% 90-305VAC 88.0% Nom Max 305 63 0.8 60 0.98 Units VAC Hz A A Nom Max ±1 ±3 Units % % 0.95 Conditions/Description 100 50 10 1.0 0.5 0.6 0.3 Conditions/Description Input to Output See Note B Input to Chassis See individual models UL8750, EN61347-1, -2-13, UL1310 See Note 1, 2, & 3. Measured at 230 Vac MIL HDBK-217F,110VAC input, 80% load, 25°C (2100mA) Case Temperature 65°C, 110VAC input, 80% load Efficiency Safety Agency Approvals No load Power Dissipation MTBF Lifetime Weight Operating Temperature Derating 2% per °C from 55°C to 70°C Storage Temperature Relative Humidity Non-condensing (operating) NOTES: 1. Non-Class 2 Output US & Canada 2. Class 2 Output US - Non-Class 2 Output Canada 3. Class 2 Output US & Canada Europe/Asia Excelsys Technologies Ltd 27 Eastgate Drive Eastgate Business Park Little Island, Cork, Ireland IRELAND LXD52 Preliminary Datasheet Release 16 Mar Input Voltage Efficiency Min 3750 1500 88 Nom 91 321,000 59,000 -35 -40 10 t: +353 21 4354716 f: +353 21 4354864 e: sales@excelsys.com Max 6.0 480 +70 +85 100 North America Excelsys Technologies 519 Interstate 30, #309 Rockwall, TX 75087 USA % I out % % s s 1 Units VAC VAC % W Hours Hours g °C °C %RH t: (972) 771 4544 f: (972) 421 1805 e: salesusa@excelsys.com LED Power Supplies EMC LED Power 52W Parameter Emissions Conducted Radiated Harmonic Distortion Flicker and Fluctuation Immunity ESD Radiated RFI Fast Transients - burst Surge Immunity Conducted RFI Power Freq Magnetic Field Voltage Dips Standard Level EN55015 EN55015 EN61000-3-2 EN61000-3-3 Level B Level B Compliant Compliant EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN61000-4-6 EN61000-4-8 EN61000-4-11 Level 4 Level 3 Level 4 Compliant Compliant Compliant Dimming Control Parameter 12V Output Voltage 12V Output Source Current Control Voltage (1-10V input Voltage applied on 1-10V input wire Source Current (1-10V input) Source current on 1-10V input wire Note Note Note Note Note Note Note A. B. C. D. E. F. G. Min 10.8 10 -2 0 Nom 12.0 15 52W Units Max 13.2 20 15 0.2 Units VDC mA V mA If dimming function is not used, 12V(yellow) and 1-10V(purple)wire must be connected together. Primary to Secondary Isolation test not to be carried out on power supply. Load Voltage must be maintained above minimum voltage. See models for voltage range. Dimming range is 10%-100%. A Vdim voltage of 1V corresponds to 20% output current. Dimming Signal Voltage should be above 1V for linear dimming control. At Vdim voltage below 1V, flickering may occur. See Dimming Implementation diagrams for various dimming methods. Do not connect GND of Dimming cable to Output. INPUT / OUTPUT WIRING INPUT CABLE SJTW 18AWG Black (L),White(N), Green (G)310±20mm OUTPUT CABLE SJTW 18AWG Black (-V) and Red (+V) 300±20mm DIMMING CABLE SJTW 22AWG Yellow (12V), Purple (1-10V), Green (GND) 270±20mm MECHANICAL SPECIFICATIONS 2 Specifications are subject to change without LXD52 Preliminary Datasheet Release 16 Mar Europe/Asia Excelsys Technologies Ltd 27 Eastgate Drive Eastgate Business Park Little Island, Cork, Ireland IRELAND North America t: +353 21 4354716 Excelsys Technologies f: +353 21 4354864 519 Interstate 30, #309 e: sales@excelsys.com Rockwall, TX 75087 USA t: (972) 771 4544 f: (972) 421 1805 e: salesusa@excelsys.com LED Power Supplies 52W LED Power 52W Dimming Implementation Diagrams Efficiency V Load for 350mA Model Power Factor Characteristics 3 Specifications are subject to change without LXD52 Preliminary Datasheet Release 16 Mar Europe/Asia Excelsys Technologies Ltd 27 Eastgate Drive Eastgate Business Park Little Island, Cork, Ireland IRELAND North America t: +353 21 4354716 Excelsys Technologies f: +353 21 4354864 519 Interstate 30, #309 e: sales@excelsys.com Rockwall, TX 75087 USA t: (972) 771 4544 f: (972) 421 1805 e: salesusa@excelsys.com