APT12040JFLL
1200V 24A 0.400Ω
POWER MOS 7
®
R
FREDFET
G
S D
S
Power MOS 7 is a new generation of low loss, high voltage, N-Channel enhancement mode power MOSFETS. Both conduction and switching ® losses are addressed with Power MOS 7 by significantly lowering RDS(ON) ® and Qg. Power MOS 7 combines lower conduction and switching losses along with exceptionally fast switching speeds inherent with APT's patented metal gate structure. • Lower Input Capacitance • Lower Miller Capacitance • Lower Gate Charge, Qg • Increased Power Dissipation • Easier To Drive • Popular SOT-227 Package • FAST RECOVERY BODY DIODE
SO
ISOTOP ®
2 T-
27
"UL Recognized"
D G S
MAXIMUM RATINGS
Symbol VDSS ID IDM VGS VGSM PD TJ,TSTG TL IAR EAR EAS Parameter Drain-Source Voltage Continuous Drain Current @ TC = 25°C Pulsed Drain Current
1
All Ratings: TC = 25°C unless otherwise specified.
APT12040JFLL UNIT Volts Amps
1200 24 96 ±30 ±40 595 4.76 -55 to 150 300 24 50
4
Gate-Source Voltage Continuous Gate-Source Voltage Transient Total Power Dissipation @ TC = 25°C Linear Derating Factor Operating and Storage Junction Temperature Range Lead Temperature: 0.063" from Case for 10 Sec. Avalanche Current
1
Volts Watts W/°C °C Amps mJ
(Repetitive and Non-Repetitive)
1
Repetitive Avalanche Energy
Single Pulse Avalanche Energy
3200
STATIC ELECTRICAL CHARACTERISTICS
Symbol BVDSS RDS(on) IDSS IGSS VGS(th) Characteristic / Test Conditions Drain-Source Breakdown Voltage (VGS = 0V, ID = 250µA) Drain-Source On-State Resistance
2
MIN
TYP
MAX
UNIT Volts
1200 0.40 250 1000 ±100 3 5
(VGS = 10V, 12A)
Ohms µA nA Volts
12-2003 050-7125 Rev B
Zero Gate Voltage Drain Current (VDS = 1200V, VGS = 0V) Zero Gate Voltage Drain Current (VDS = 960V, VGS = 0V, TC = 125°C) Gate-Source Leakage Current (VGS = ±30V, VDS = 0V) Gate Threshold Voltage (VDS = VGS, ID = 5mA)
CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
APT Website - http://www.advancedpower.com
DYNAMIC CHARACTERISTICS
Symbol Ciss Coss C rss Qg Qgs Qgd td(on) tr td(off) tf Eon Eoff Eon Eoff Symbol IS ISM VSD
dv/ dt
APT12040JFLL
Test Conditions
VGS = 0V VDS = 25V f = 1 MHz VGS = 10V VDD = 600V ID = 30A @ 25°C RESISTIVE SWITCHING VGS = 15V VDD = 600V ID = 30A @ 25°C 6 RG = 0.6Ω INDUCTIVE SWITCHING @ 25°C VDD = 800V, VGS = 15V ID = 30A, RG = 5Ω 6 INDUCTIVE SWITCHING @ 125°C VDD = 800V, VGS = 15V ID = 30A, RG = 5Ω
Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge
3
MIN
TYP
MAX
UNIT pF
7247 1102 200 275 32 179 21 14 67 24 1265 1147 2293 1411
MIN TYP MAX
Gate-Source Charge Gate-Drain ("Miller ") Charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Turn-on Switching Energy Turn-off Switching Energy Characteristic / Test Conditions Continuous Source Current (Body Diode) Pulsed Source Current Diode Forward Voltage Peak Diode Recovery
1 2 dt
nC
ns
µJ
SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS
UNIT Amps Volts V/ns ns
24 96 1.3 18
Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C Tj = 25°C Tj = 125°C MIN
(Body Diode) (VGS = 0V, IS = -24A)
5
d v/
t rr
Reverse Recovery Time (IS = -24A, di/dt = 100A/µs) Reverse Recovery Charge (IS = -24A, di/dt = 100A/µs) Peak Recovery Current (IS = -24A, di/dt = 100A/µs) Characteristic Junction to Case Junction to Ambient
375 860 2.0 9.0 15 28
TYP MAX
Q rr IRRM
µC
Amps
THERMAL CHARACTERISTICS
Symbol RθJC RθJA UNIT °C/W
0.21 40
4 Starting Tj = +25°C, L = 11.11mH, RG = 25Ω, Peak IL = 24A 5 dv/dt numbers reflect the limitations of the test circuit rather than the device itself. IS ≤ -24A di/dt ≤ 700A/µs VR ≤ 1200 TJ ≤ 150°C 6 Eon includes diode reverse recovery. See figures 18, 20.
1 Repetitive Rating: Pulse width limited by maximum junction temperature 2 Pulse Test: Pulse width < 380 µs, Duty Cycle < 2% 3 See MIL-STD-750 Method 3471
0.25
Z JC, THERMAL IMPEDANCE (°C/W) θ
APT Reserves the right to change, without notice, the specifications and information contained herein.
0.20
0.9
0.15
0.7
0.5 0.10 0.3 0.05 0.1 0 0.05 10-5 10-4 SINGLE PULSE
12-2003
Note:
PDM t1 t2 Duty Factor D = t1/t2 Peak TJ = PDM x ZθJC + TC
050-7125 Rev B
10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (SECONDS) FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION
10
Typical Performance Curves
70
ID, DRAIN CURRENT (AMPERES)
Junction temp. (°C) RC MODEL
APT12040JFLL
VGS =15 & 10V 60 50 40 30 20 5V 10 4.5V 0 5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 3, LOW VOLTAGE OUTPUT CHARACTERISTICS
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
7V 6V
0.0432
0.0273F
Power (watts)
0.142
0.469F
5.5V
0.0189 Case temperature. (°C)
44.2F
0
FIGURE 2, TRANSIENT THERMAL IMPEDANCE MODEL 80 70 60 50 40 30 20 10 0 TJ = -55°C TJ = +25°C TJ = +125°C 0 1 2 3 4 5 6 7 VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) FIGURE 4, TRANSFER CHARACTERISTICS
VDS> ID (ON) x RDS (ON)MAX. 250µSEC. PULSE TEST @
很抱歉,暂时无法提供与“APT12040JFLL”相匹配的价格&库存,您可以联系我们找货
免费人工找货