APT20GT60BRDQ1G

TYPICAL PERFORMANCE CURVES ® APT20GT60BRDQ1 APT20GT60BRDQ1G* APT20GT60BRDQ1(G) 600V *G Denotes RoHS Compliant, Pb Free Terminal Finish. Thunderbolt IGBT® The Thunderblot IGBT® is a new generation of high voltage power IGBTs. Using Non- Punch Through Technology, the Thunderblot IGBT® offers superior ruggedness and ultrafast switching speed. • Low Forward Voltage Drop • Low Tail Current • RBSOA and SCSOA Rated • High Freq. Switching to 150KHz • Ultra Low Leakage Current G TO -2 47 C E C G E MAXIMUM RATINGS Symbol VCES VGE I C1 I C2 I CM SSOA PD TJ,TSTG TL Parameter Collector-Emitter Voltage Gate-Emitter Voltage Continuous Collector Current @ TC = 25°C Continuous Collector Current @ TC = 110°C Pulsed Collector Current 1 All Ratings: TC = 25°C unless otherwise specified. APT20GT60BRDQ1(G) UNIT Volts 600 ±30 43 20 80 80A @ 600V 174 -55 to 150 300 Amps @ TC = 150°C Switching Safe Operating Area @ TJ = 150°C Total Power Dissipation Operating and Storage Junction Temperature Range Max. Lead Temp. for Soldering: 0.063" from Case for 10 Sec. Watts °C STATIC ELECTRICAL CHARACTERISTICS Symbol V(BR)CES VGE(TH) VCE(ON) Characteristic / Test Conditions Collector-Emitter Breakdown Voltage (VGE = 0V, I C = 0.5mA) Gate Threshold Voltage (VCE = VGE, I C = 500µA, Tj = 25°C) MIN TYP MAX Units 600 3 1.6 4 2.0 2.8 50 2 5 2.5 Collector-Emitter On Voltage (VGE = 15V, I C = 20A, Tj = 25°C) Collector-Emitter On Voltage (VGE = 15V, I C = 20A, Tj = 125°C) Collector Cut-off Current (VCE = 600V, VGE = 0V, Tj = 25°C) 2 Volts I CES I GES µA nA 12-2005 052-6265 Rev B Collector Cut-off Current (VCE = 600V, VGE = 0V, Tj = 125°C) Gate-Emitter Leakage Current (VGE = ±20V) 1000 ±100 CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. APT Website - http://www.advancedpower.com DYNAMIC CHARACTERISTICS Symbol Cies Coes Cres VGEP Qg Qge Qgc SSOA td(on) td(off) tf Eon1 Eon2 td(on) tr td(off) tf Eon1 Eon2 Eoff Eoff tr Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Gate-to-Emitter Plateau Voltage Total Gate Charge 3 APT20GT60BRDQ1(G) Test Conditions Capacitance VGE = 0V, VCE = 25V f = 1 MHz Gate Charge VCE = 300V I C = 20A TJ = 150°C, R G = 5Ω, VGE = VGE = 15V MIN TYP MAX UNIT pF V nC 1100 110 65 7.5 100 7 43 80 8 9 80 39 215 210 245 8 9 100 60 215 375 395 µJ ns ns A Gate-Emitter Charge Gate-Collector ("Miller ") Charge Switching Safe Operating Area Turn-on Delay Time Current Rise Time Turn-off Delay Time Current Fall Time Turn-on Switching Energy Turn-off Switching Energy Turn-on Delay Time Current Rise Time Turn-off Delay Time Current Fall Time Turn-on Switching Energy Turn-off Switching Energy 44 55 4 5 15V, L = 100µH,VCE = 600V Inductive Switching (25°C) VCC = 400V VGE = 15V I C = 20A RG = 5Ω Turn-on Switching Energy (Diode) 6 TJ = +25°C Inductive Switching (125°C) VCC = 400V VGE = 15V I C = 20A RG = 5Ω µJ Turn-on Switching Energy (Diode) 6 TJ = +125°C THERMAL AND MECHANICAL CHARACTERISTICS Symbol RθJC RθJC WT Characteristic Junction to Case (IGBT) Junction to Case (DIODE) Package Weight MIN TYP MAX UNIT °C/W gm .72 1.35 5.9 1 Repetitive Rating: Pulse width limited by maximum junction temperature. 2 For Combi devices, Ices includes both IGBT and FRED leakages 3 See MIL-STD-750 Method 3471. 4 Eon1 is the clam ped inductive turn-on-energy of the IGBT only, without the effect of a commutating diode reverse recovery current adding to the IGBT turn-on loss. (See Figure 24.) 12-2005 5 Eon2 is the clamped inductive turn-on energy that includes a commutating diode reverse recovery current in the IGBT turn-on switching loss. (See Figures 21, 22.) 6 Eoff is the clamped inductive turn-off energy measured in accordance with JEDEC standard JESD24-1. (See Figures 21, 23.) APT Reserves the right to change, without notice, the specifications and information contained herein. 052-6265 Rev B TYPICAL PERFORMANCE CURVES 80 70 IC, COLLECTOR CURRENT (A) 60 50 40 30 20 10 0 0 1 2 3 4 5 6 VCE, COLLECTER-TO-EMITTER VOLTAGE (V) 250µs PULSE TEST