APT2X100D30J

2 3 2 3 2 1 4 3 1 4 1 4 Anti-Parallel APT2X100D30J Parallel APT2X101D30J ISOTOP ® SO 2 T- 27 ® "UL Recognized" file # E145592 APT2X101D30J APT2X100D30J 300V 100A 300V 100A DUAL DIE ISOTOP® PACKAGE ULTRAFAST SOFT RECOVERY RECTIFIER DIODE PRODUCT APPLICATIONS • Anti-Parallel Diode • • • • • -Switchmode Power Supply -Inverters Free Wheeling Diode -Motor Controllers -Converters Snubber Diode Uninterruptible Power Supply (UPS) Induction Heating High Speed Rectifiers PRODUCT FEATURES • Ultrafast Recovery Times • Soft Recovery Characteristics • Popular SOT-227 Package • Low Forward Voltage • High Blocking Voltage • Low Leakage Current PRODUCT BENEFITS • Low Losses • Low Noise Switching • Cooler Operation • Higher Reliability Systems • Increased System Power Density MAXIMUM RATINGS Symbol VR VRRM VRWM IF(AV) IF(AV) IFSM TJ,TSTG TL Characteristic / Test Conditions Maximum D.C. Reverse Voltage Maximum Peak Repetitive Reverse Voltage Maximum Working Peak Reverse Voltage All Ratings: TC = 25°C unless otherwise specified. APT2X101_100D30J UNIT 300 Volts Maximum Average Forward Current (TC = 123°C, Duty Cycle = 0.5) RMS Forward Current (Square wave, 50% duty) Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) Operating and StorageTemperature Range Lead Temperature for 10 Sec. 100 183 1000 -55 to 175 300 °C Amps STATIC ELECTRICAL CHARACTERISTICS Symbol Characteristic / Test Conditions IF = 100A VF Forward Voltage IF = 200A IF = 100A, TJ = 125°C IRM CT Maximum Reverse Leakage Current Junction Capacitance, VR = 200V APT Website - http://www.advancedpower.com MIN TYP MAX UNIT 1.2 1.5 1.0 1.4 Volts VR = 300V, TJ = 125°C 1000 270 µA pF 053-4057 Rev B 3-2006 VR = 300V 500 DYNAMIC CHARACTERISTICS Symbol trr trr Qrr IRRM trr Qrr IRRM trr Qrr IRRM Characteristic Reverse Recovery Time Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current IF = 100A, diF/dt = -1000A/µs VR = 200V, TC = 125°C IF = 100A, diF/dt = -200A/µs VR = 200V, TC = 125°C IF = 100A, diF/dt = -200A/µs VR = 200V, TC = 25°C Test Conditions IF = 1A, diF/dt = -100A/µs, VR = 30V, TJ = 25°C MIN - APT2X101_100D30J TYP MAX UNIT ns nC 36 47 120 5 110 650 10 70 1490 37 - - Amps ns nC Amps ns nC Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol Characteristic / Test Conditions RθJC VIsolation WT Junction-to-Case Thermal Resistance RMS Voltage (50-60hHz Sinusoidal Wavefomr Ffrom Terminals to Mounting Base for 1 Min.) Package Weight MIN TYP MAX UNIT °C/W Volts .33 2500 1.03 29.2 10 1.1 oz g lb•in N•m Torque Maximum Mounting Torque APT Reserves the right to change, without notice, the specifications and information contained herein. 0.35 Z JC, THERMAL IMPEDANCE (°C/W) θ 0.30 0.25 0.20 0.15 0.3 0.10 0.05 0 0.1 0.05 10-5 10-4 SINGLE PULSE D = 0.9 0.7 0.5 Note: PDM t1 t2 Duty Factor D = 1/t2 Peak TJ = PDM x ZθJC + TC t 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION RC MODEL Junction temp (°C) 0.0294 °C/W 0.00051 J/°C 3-2006 Power (watts) 0.0699 °C/W 0.0310 J/°C 053-4057 Rev B 0.230 °C/W Case temperature (°C) 0.699 J/°C FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL TYPICAL PERFORMANCE CURVES 300 250 200 150 100 50 0 TJ = 150°C TJ = 125°C TJ = -55°C 0 TJ = 25°C trr, REVERSE RECOVERY TIME (ns) 120 175A APT2X101_100D30J T = 125°C J V = 200V R IF, FORWARD CURRENT (A) 100 80 60 40 20 0 100A 50A 0.5 1 1.5 2 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage 1800 Qrr, REVERSE RECOVERY CHARGE (nC) 1600 1400 1200 1000 800 600 400 200 0 50A T = 125°C J V = 200V R 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change IRRM, REVERSE RECOVERY CURRENT (A) 40 35 30 25 T = 125°C J V = 200V R 175A 175A 100A 100A 20 15 10 5 0 50A 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 250 Duty cycle = 0.5 T = 175°C J 1.4 Kf, DYNAMIC PARAMETERS (Normalized to 1000A/µs) 1.2 1.0 Qrr trr IF(AV) (A) Qrr IRRM trr 200 0.8 0.6 0.4 0.2 0.0 0 150 100 50 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 2500 CJ, JUNCTION CAPACITANCE (pF) 75 100 125 150 175 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 0 25 50 2000 1500 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 0 1 053-4057 Rev B 500 3-2006 1000 APT2X101_100D30J Vr +18V 0V D.U.T. 30µH trr/Qrr Waveform diF /dt Adjust APT30M30LLL PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 2 3 4 IF - Forward Conduction Current diF /dt - Rate of Diode Current Change Through Zero Crossing. IRRM - Maximum Reverse Recovery Current. Zero 1 4 5 3 2 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. Qrr - Area Under the Curve Defined by IRRM and trr. 0.25 IRRM 5 Figure 10, Diode Reverse Recovery Waveform and Definitions SOT-227 (ISOTOP®) Package Outline 31.5 (1.240) 31.7 (1.248) 7.8 (.307) 8.2 (.322) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 11.8 (.463) 12.2 (.480) 8.9 (.350) 9.6 (.378) Hex Nut M4 H100 (4 places) r = 4.0 (.157) (2 places) 4.0 (.157) 4.2 (.165) (2 places) 25.2 (0.992) 0.75 (.030) 12.6 (.496) 25.4 (1.000) 0.85 (.033) 12.8 (.504) 3.3 (.129) 3.6 (.143) 14.9 (.587) 15.1 (.594) 3-2006 1.95 (.077) 2.14 (.084) Anti-parallel APT2X100D30J Parallel Cathode 1 Cathode 1 APT2X101D30J 30.1 (1.185) 30.3 (1.193) 38.0 (1.496) 38.2 (1.504) Anode 2 Anode 1 053-4057 Rev B Dimensions in Millimeters and (Inches) Cathode 2 Anode 1 Cathode 2 Anode 2 ISOTOP® is a Registered Trademark of SGS Thomson. APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.