APT2X61D20J

2 3 2 3 1 2 4 3 1 4 1 4 Parallel SO 2 T- 27 Anti-Parallel APT2X60D20J APT2X61D20J APT2X60D20J APT2X61D20J 200V 200V 60A 60A DUAL DIE ISOTOP® PACKAGE ULTRAFAST SOFT RECOVERY DUAL RECTIFIER DIODES PRODUCT APPLICATIONS • Anti-Parallel Diode • • • • • -Switchmode Power Supply -Inverters Free Wheeling Diode -Motor Controllers -Converters Snubber Diode Uninterruptible Power Supply (UPS) Induction Heating High Speed Rectifiers PRODUCT FEATURES • Ultrafast Recovery Times • Soft Recovery Characteristics • Popular SOT-227 Package • Low Forward Voltage • High Blocking Voltage • Low Leakage Current PRODUCT BENEFITS • Low Losses • Low Noise Switching • Cooler Operation • Higher Reliability Systems • Increased System Power Density MAXIMUM RATINGS Symbol VR VRRM VRWM IF(AV) IF(RMS) IFSM TJ,TSTG TL Characteristic / Test Conditions Maximum D.C. Reverse Voltage Maximum Peak Repetitive Reverse Voltage Maximum Working Peak Reverse Voltage All Ratings: TC = 25°C unless otherwise specified. APT2X60/2X61D20J UNIT 200 Volts Maximum Average Forward Current (TC = 100°C, Duty Cycle = 0.5) RMS Forward Current Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) Operating and StorageTemperature Range Lead Temperature: 0.063" from Case for 10 Sec. 60 100 600 -55 to 150 °C Amps 300 STATIC ELECTRICAL CHARACTERISTICS Symbol Characteristic / Test Conditions IF = 60A VF Maximum Forward Voltage IF = 120A IF = 60A, TJ = 150°C IRM CT LS USA 405 S.W. Columbia Street MIN TYP MAX UNIT 1.15 1.26 0.93 250 µA Volts Maximum Reverse Leakage Current VR = VR Rated VR = VR Rated, TJ = 125°C 500 215 10 pF nH 053-2003 Rev B Junction Capacitance, VR = 200V Series Inductance (Lead to Lead 5mm from Base) APT Website - http://www.advancedpower.com Bend, Oregon 97702-1035 F-33700 Merignac - France Phone: (541) 382-8028 Phone: (33) 5 57 92 15 15 FAX: (541) 388-0364 FAX: (33) 5 56 47 97 61 EUROPE Avenue J.F. Kennedy Bât B4 Parc Cadéra Nord DYNAMIC CHARACTERISTICS Symbol trr1 trr2 trr3 tfr1 tfr2 IRRM1 IRRM2 Qrr1 Qrr2 Vfr1 Vfr2 diM/dt IF = 60A, diF /dt = -480A/µs, VR = 100V Characteristic Reverse Recovery Time, IF = 1.0A, diF /dt = -15A/µs, VR = 30V, TJ = 25°C Reverse Recovery Time IF = 60A, diF /dt = -480A/µs, VR = 100V Forward Recovery Time IF = 60A, diF /dt = 480A/µs, VR = 100V Reverse Recovery Current IF = 60A, diF /dt = -480A/µs, VR = 100V Recovery Charge IF = 60A, diF /dt = -480A/µs, VR = 100V Forward Recovery Voltage IF = 60A, diF /dt = 480A/µs, VR = 100V Rate of Fall of Recovery Current TJ = 25°C TJ = 100°C TJ = 25°C TJ = 100°C TJ = 25°C TJ = 100°C TJ = 25°C TJ = 100°C TJ = 25°C TJ = 100°C TJ = 25°C TJ = 100°C MIN APT2X60/2X61D20J TYP MAX UNIT 50 36 71 180 180 12 21 270 70 ns 20 Amps 35 nC 750 7 Volts 7 1000 A/µs 1500 THERMAL AND MECHANICAL CHARACTERISTICS Symbol RqJC RqJA VIsolation WT Characteristic / Test Conditions Junction-to-Case Thermal Resistance Junction-to-Ambient Thermal Resistance RMS Voltage (50-60 Hz Sinusoidal Waveform from Terminals to Mounting Base for 1 Min.) Package Weight MIN TYP MAX UNIT °C/W 0.66 20 2500 1.03 29.2 13.6 Volts oz gm lb•in N•m Torque Maximum Torque (Mounting = 8-32 or 4mm Machine and Terminals = 4mm Machine) 1.5 1.0 0.5 D=0.5 Z JC, THERMAL IMPEDANCE (°C/W) q 0.2 0.1 0.05 0.1 0.05 0.02 0.01 0.01 0.005 SINGLE PULSE Note: PDM t1 t2 053-2003 Rev B Duty Factor D = t1/t2 Peak TJ = PDM x ZθJC + TC 0.001 10-5 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (SECONDS) FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION 10-4 10 APT2X60/2X61D20J 200 Qrr, REVERSE RECOVERY CHARGE (nano-COULOMBS) 2000 TJ = 100°C VR = 100V IF, FORWARD CURRENT (AMPERES) 160 TJ = 150°C TJ = 100°C 80 T J = 25 ° C TJ = -55°C 40 1600 120A 1200 60A 120 800 400 30A 0 0 0.4 0.8 1.2 1.6 2.0 VF, ANODE-TO-CATHODE VOLTAGE (VOLTS) Figure 2, Forward Voltage Drop vs Forward Current 60 IRRM, REVERSE RECOVERY CURRENT (AMPERES) TJ = 100°C VR = 100V 0 10 50 100 500 1000 diF /dt, CURRENT SLEW RATE (AMPERES/µSEC) Figure 3, Reverse Recovery Charge vs Current Slew Rate 2.0 120A 40 Kf, DYNAMIC PARAMETERS (NORMALIZED) 50 1.6 Qrr trr 1.2 30 60A 20 10 30A 0.8 IRRM 0.4 trr Qrr 0 0 200 400 600 800 1000 diF /dt, CURRENT SLEW RATE (AMPERES/µSEC) Figure 4, Reverse Recovery Current vs Current Slew Rate 100 TJ = 100°C VR = 100V -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 5, Dynamic Parameters vs Junction Temperature 3000 tfr, FORWARD RECOVERY TIME (nano-SECONDS) 0.0 -50 15.0 Vfr, FORWARD RECOVERY VOLTAGE (VOLTS) TJ = 100°C VR = 100V IF = 60A trr, REVERSE RECOVERY TIME (nano-SECONDS) 2500 2000 12.5 10.0 7.5 5.0 2.5 tfr 90 Vfr 120A 80 60A 30A 70 1500 1000 500 0 200 400 600 800 1000 diF /dt, CURRENT SLEW RATE (AMPERES/µSEC) Figure 6, Reverse Recovery Time vs Current Slew Rate 3000 60 0 0 200 400 600 800 1000 diF /dt, CURRENT SLEW RATE (AMPERES/µSEC) Figure 7, Forward Recovery Voltage/Time vs Current Slew Rate 0 CJ, JUNCTION CAPACITANCE (pico-FARADS) 1000 500 200 053-2003 Rev B 100 0.01 0.05 0.1 0.5 1 5 VR, REVERSE VOLTAGE (VOLTS) 10 50 100 200 Figure 8, Junction Capacitance vs Reverse Voltage Vr APT2X60/2X61D20J D.U.T. 30µH trr/Qrr Waveform +15v diF /dt Adjust 0v -15v PEARSON 411 CURRENT TRANSFORMER Figure 9, Diode Reverse Recovery Test Circuit and Waveforms 1 2 3 4 IF - Forward Conduction Current diF /dt - Current Slew Rate, Rate of Forward Current Change Through Zero Crossing. Zero IRRM - Peak Reverse Recovery Current. trr - Reverse Recovery Time Measured from Point of IF 3 Current Falling Through Zero to a Tangent Line { 6 diM/dt} Extrapolated Through Zero Defined by 0.75 and 0.50 IRRM. 5 0.5 IRRM 0.75 IRRM 2 Qrr = 1/2 (trr . IRRM) 1 4 6 5 6 Qrr - Area Under the Curve Defined by IRRM and trr. diM/dt - Maximum Rate of Current Change During the Trailing Portion of trr. Figure 10, Diode Reverse Recovery Waveform and Definitions APT Reserves the right to change, without notice, the specifications and information contained herein. SOT-227 Package Outline 11.8 (.463) 12.2 (.480) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 8.9 (.350) 9.6 (.378) Hex Nut M4 H100 (4 places) 31.5 (1.240) 31.7 (1.248) 7.8 (.307) 8.2 (.322) r = 4.0 (.157) (2 places) 4.0 (.157) 4.2 (.165) (2 places) 25.2 (0.992) 0.75 (.030) 12.6 (.496) 25.4 (1.000) 0.85 (.033) 12.8 (.504) 3.3 (.129) 3.6 (.143) 14.9 (.587) 15.1 (.594) 30.1 (1.185) 30.3 (1.193) 38.0 (1.496) 38.2 (1.504) 1.95 (.077) 2.14 (.084) Anti-parallel Parallel APT2X60D20J APT2X61D20J Anode 2 Cathode 1 Cathode 2 Anode 2 053-2003 Rev B Dimensions in Millimeters and (Inches) Cathode 2 Anode 1 Cathode 1 Anode 1 ISOTOP® is a Registered Trademark of SGS Thomson.