APT30D100BHB

® 1000V 2x18A APT30D100BHB APT30D100BHBG* *G Denotes RoHS Compliant, Pb Free Terminal Finish. ULTRAFAST SOFT RECOVERY RECTIFIER DIODE TO PRODUCT APPLICATIONS • Output Rectifiers for Switchmode Power Supply PRODUCT FEATURES • Ultrafast Recovery Times • Soft Recovery Characteristics • Popular TO-247 Package • Low Forward Voltage • Low Leakage Current PRODUCT BENEFITS • Low Losses • Low Noise Switching • Cooler Operation • Higher Reliability Systems • Increased System Power Density 1 - Cathode 1 2 - Anode 1 Cathode 2 3 - Anode 2 1 -2 4 7 2 3 1 2 3 MAXIMUM RATINGS Symbol VR VRRM VRWM IF(AV) IF(AV) IFSM TJ,TSTG TL Characteristic / Test Conditions Maximum D.C. Reverse Voltage Maximum Peak Repetitive Reverse Voltage Maximum Working Peak Reverse Voltage All Ratings Per Leg: TC = 25°C unless otherwise specified. APT30D100BHB(G) UNIT 1000 Volts Maximum Average Forward Current (TC = 105°C, Duty Cycle = 0.5) RMS Forward Current (Square wave, 50% duty) Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) Operating and StorageTemperature Range Lead Temperature for 10 Sec. 18 27 210 -55 to 150 300 °C Amps STATIC ELECTRICAL CHARACTERISTICS Symbol Characteristic / Test Conditions IF = 30A VF Forward Voltage IF = 60A IF = 30A, TJ = 125°C IRM CT Maximum Reverse Leakage Current Junction Capacitance, VR = 200V APT Website - http://www.advancedpower.com MIN TYP MAX UNIT 1.9 2.2 1.7 2.3 Volts VR = VR Rated VR = VR Rated, TJ = 125°C 250 500 32 050-5964 Rev A pF 6-2005 µA DYNAMIC CHARACTERISTICS Symbol trr trr Qrr IRRM trr Qrr IRRM trr Qrr IRRM Characteristic Reverse Recovery Time Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current IF = 30A, diF/dt = -1000A/µs VR = 667V, TC = 125°C IF = 30A, diF/dt = -200A/µs VR = 667V, TC = 125°C IF = 30A, diF/dt = -200A/µs VR = 667V, TC = 25°C Test Conditions IF = 1A, diF/dt = -100A/µs, VR = 30V, TJ = 25°C MIN - APT30D100BHB(G) TYP MAX UNIT ns nC 29 290 670 5 390 2350 11 160 3500 38 - - Amps ns nC Amps ns nC Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol RθJC RθJA WT Characteristic / Test Conditions Junction-to-Case Thermal Resistance Junction-to-Ambient Thermal Resistance Package Weight MIN TYP MAX UNIT °C/W oz g 1.8 40 0.22 5.9 10 1.1 lb•in N•m Torque Maximum Mounting Torque APT Reserves the right to change, without notice, the specifications and information contained herein. 2.00 Z JC, THERMAL IMPEDANCE (°C/W) θ 0.9 1.60 1.20 0.7 0.5 Note: PDM 0.80 0.3 0.40 0.1 0 0.05 10-5 10-4 SINGLE PULSE t1 t2 Duty Factor D = 1/t2 Peak TJ = PDM x ZθJC + TC t 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION RC MODEL Junction temp (°C) 0.451 °C/W 0.00273 J/°C 6-2005 Power (watts) 1.18 °C/W 0.0448 J/°C 050-5964 Rev A 0.164 °C/W Case temperature (°C) 1.62 J/°C FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL TYPICAL PERFORMANCE CURVES 100 trr, REVERSE RECOVERY TIME (ns) 90 IF, FORWARD CURRENT (A) 80 70 60 50 40 30 20 10 0 0 TJ = 150°C TJ = 25°C TJ = -55°C 400 350 300 250 200 150 100 50 60A APT30D100BHB(G) T = 125°C J V = 667V R 30A 15A TJ = 125°C 0.5 1 1.5 2 2.5 3. VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage 6000 Qrr, REVERSE RECOVERY CHARGE (nC) 5000 60A 4000 3000 2000 15A 1000 0 T = 125°C J V = 667V R 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change IRRM, REVERSE RECOVERY CURRENT (A) 45 40 35 30 25 20 15 10 5 0 T = 125°C J V = 667V R 0 60A 30A 30A 15A 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 1.2 Kf, DYNAMIC PARAMETERS (Normalized to 1000A/µs) 1.0 0.8 0.6 0.4 0.2 0.0 trr IRRM trr Qrr 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 35 30 25 IF(AV) (A) 20 15 10 5 Duty cycle = 0.5 T = 175°C J Qrr 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 300 CJ, JUNCTION CAPACITANCE (pF) 250 200 150 100 50 0 0 75 100 125 150 175 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 0 25 50 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 1 050-5964 Rev A 6-2005 Vr +18V 0V D.U.T. 30µH diF /dt Adjust APT10035LLL APT30D100BHB(G) trr/Qrr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 2 3 4 IF - Forward Conduction Current diF /dt - Rate of Diode Current Change Through Zero Crossing. IRRM - Maximum Reverse Recovery Current. Zero 1 4 5 3 2 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. Qrr - Area Under the Curve Defined by IRRM and trr. 0.25 IRRM 5 Figure 10, Diode Reverse Recovery Waveform and Definitions TO-247 Package Outline e1 SAC: Tin, Silver, Copper 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 6.15 (.242) BSC 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244) Anode 1 / Cathode 2 20.80 (.819) 21.46 (.845) 3.55 (.140) 3.81 (.150) 4.50 (.177) Max. 0.40 (.016) 0.79 (.031) 2.87 (.113) 3.12 (.123) 1.65 (.065) 2.13 (.084) 6-2005 19.81 (.780) 20.32 (.800) 1.01 (.040) 1.40 (.055) Cathode 1 Anode 1 / Cathode 2 Anode 2 050-5964 Rev A 2.21 (.087) 2.59 (.102) 5.45 (.215) BSC 2-Plcs. Dimensions in Millimeters and (Inches) APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.