APT30D60BCA_05

® 600V 2x27A APT30D60BCA APT30D60BCAG* *G Denotes RoHS Compliant, Pb Free Terminal Finish. ULTRAFAST SOFT RECOVERY RECTIFIER DIODE TO PRODUCT APPLICATIONS • Parallel Diode -Switchmode Power Supply -Inverters • Free Wheeling Diode -Motor Controllers -Converters -Inverters • Snubber Diode • PFC PRODUCT FEATURES • Ultrafast Recovery Times • Soft Recovery Characteristics • Popular TO-247 Package • Low Forward Voltage • Low Leakage Current PRODUCT BENEFITS • Low Losses • Low Noise Switching • Cooler Operation • Higher Reliability Systems • Increased System Power Density 1 2 -2 4 7 3 1 2 1 - Cathode 1 2 - Anode 3 - Cathode 2 Back of Case - Anode 3 MAXIMUM RATINGS Symbol VR VRRM VRWM IF(AV) IF(RMS) IFSM TJ,TSTG TL Characteristic / Test Conditions Maximum D.C. Reverse Voltage Maximum Peak Repetitive Reverse Voltage Maximum Working Peak Reverse Voltage All Ratings Per Leg: TC = 25°C unless otherwise specified. APT30D60BCA(G) UNIT 600 Volts Maximum Average Forward Current (TC = 108°C, Duty Cycle = 0.5) RMS Forward Current (Square wave, 50% duty) Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) Operating and StorageTemperature Range Lead Temperature for 10 Sec. 27 42 320 -55 to 150 300 °C Amps STATIC ELECTRICAL CHARACTERISTICS Symbol Characteristic / Test Conditions IF = 30A VF Forward Voltage IF = 60A IF = 30A, TJ = 125°C IRM CT Maximum Reverse Leakage Current Junction Capacitance, VR = 200V APT Website - http://www.advancedpower.com MIN TYP MAX UNIT 1.6 1.9 1.4 1.8 Volts VR = VR Rated, TJ = 125°C 500 44 050-5962 Rev B pF 4-2005 VR = VR Rated 250 µA DYNAMIC CHARACTERISTICS Symbol trr trr Qrr IRRM trr Qrr IRRM trr Qrr IRRM Characteristic Reverse Recovery Time Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current IF = 30A, diF/dt = -1000A/µs VR = 400V, TC = 125°C IF = 30A, diF/dt = -200A/µs VR = 400V, TC = 125°C IF = 30A, diF/dt = -200A/µs VR = 400V, TC = 25°C Test Conditions IF = 1A, diF/dt = -100A/µs, VR = 30V, TJ = 25°C MIN TYP APT30D60BCA(G) MAX UNIT ns nC 23 85 130 4 160 700 8 70 1300 30 - - Amps ns nC Amps ns nC Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol RθJC RθJA WT Characteristic / Test Conditions Junction-to-Case Thermal Resistance Junction-to-Ambient Thermal Resistance Package Weight MIN TYP MAX UNIT °C/W oz g 1.5 40 0.22 5.9 10 1.1 lb•in N•m Torque Maximum Mounting Torque APT Reserves the right to change, without notice, the specifications and information contained herein. 1.60 Z JC, THERMAL IMPEDANCE (°C/W) θ 1.40 1.20 1.00 0.80 0.60 0.3 0.40 0.20 0 10-5 0.1 0.05 10-4 SINGLE PULSE 0.7 0.9 0.5 Note: PDM t1 t2 Duty Factor D = 1/t2 Peak TJ = PDM x ZθJC + TC t 10-3 10-2 10-1 1.0 10 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION RC MODEL Junction temp (°C) 0.395 °C/W 0.0024 J/°C 4-2005 Power (watts) 0.962 °C/W 0.0565 J/°C 050-5962 Rev B 0.143 °C/W Case temperature (°C) 2.87 J/°C FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL TYPICAL PERFORMANCE CURVES 100 trr, REVERSE RECOVERY TIME (ns) 200 180 160 140 120 100 80 60 40 20 30A 60A APT30D60BCA(G) T = 125°C J V = 400V R IF, FORWARD CURRENT (A) 80 TJ = 175°C TJ = 150°C 40 TJ = 125°C 20 TJ = -55°C 0.5 1 1.5 2 2.5 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage 1800 0 0 TJ = 25°C 60 15A 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change IRRM, REVERSE RECOVERY CURRENT (A) 35 30 25 20 15 10 5 0 T = 125°C J V = 400V R 0 Qrr, REVERSE RECOVERY CHARGE (nC) 1600 1400 1200 1000 800 600 400 200 0 T = 125°C J V = 400V R 60A 60A 30A 30A 15A 15A 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 50 45 40 Duty cycle = 0.5 T = 175°C J 1.2 Kf, DYNAMIC PARAMETERS (Normalized to 1000A/µs) 1.0 0.8 trr 0.6 0.4 0.2 0.0 IRRM Qrr trr Qrr 35 IF(AV) (A) 30 25 20 15 10 5 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 350 CJ, JUNCTION CAPACITANCE (pF) 0 75 100 125 150 175 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 0 25 50 300 250 200 150 100 50 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 0 1 4-2005 050-5962 Rev B Vr +18V 0V D.U.T. 30µH diF /dt Adjust APT5018BLL APT30D60BCA(G) trr/Qrr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 2 3 4 IF - Forward Conduction Current diF /dt - Rate of Diode Current Change Through Zero Crossing. IRRM - Maximum Reverse Recovery Current. Zero 1 4 5 3 2 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. Qrr - Area Under the Curve Defined by IRRM and trr. 0.25 IRRM 5 Figure 10, Diode Reverse Recovery Waveform and Definitions TO-247 Package Outline e1 SAC: Tin, Silver, Copper 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 6.15 (.242) BSC 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244) Common Anode 20.80 (.819) 21.46 (.845) 3.55 (.138) 3.81 (.150) 4.50 (.177) Max. 0.40 (.016) 0.79 (.031) 2.87 (.113) 3.12 (.123) 1.65 (.065) 2.13 (.084) 4-2005 19.81 (.780) 20.32 (.800) 1.01 (.040) 1.40 (.055) Cathode 1 Common Anode Cathode 2 050-5962 Rev B 2.21 (.087) 2.59 (.102) 5.45 (.215) BSC 2-Plcs. Dimensions in Millimeters and (Inches) APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.