APT30DS60S

1 2 TO -24 7 1 - Cathode 2 2 - Anode 1 D3PAK 1 2 1 2 APT30DS60B 600V APT30DS60S 600V 20A 20A 2-300V HIGH FREQUENCY SOFT RECOVERY RECTIFIER DIODES IN SERIES PRODUCT APPLICATIONS • Anti-Parallel Diode • • • • • -Switchmode Power Supply -Inverters Free Wheeling Diode -Motor Controllers -Converters Snubber Diode Uninterruptible Power Supply (UPS) Induction Heating High Speed Rectifiers PRODUCT FEATURES • Ultrafast Recovery Times • Soft Recovery Characteristics • Popular TO-247 Package or • Low Forward Voltage Surface Mount D3PAK Package PRODUCT BENEFITS • Low Losses • Low Noise Switching • Cooler Operation • Higher Reliability Systems • Increased System Power Density • High Blocking Voltage • Low Leakage Current MAXIMUM RATINGS Symbol VR VRRM VRWM IF(AV) IF(RMS) IFSM TJ,TSTG TL Characteristic / Test Conditions Maximum D.C. Reverse Voltage Maximum Peak Repetitive Reverse Voltage Maximum Working Peak Reverse Voltage All Ratings: TC = 25°C unless otherwise specified. APT30DS60B_S UNIT 600 Volts Maximum Average Forward Current (TC = 79°C, Duty Cycle = 0.5) RMS Forward Current (Square wave, 50% duty) Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) Operating and StorageTemperature Range Lead Temperature for 10 Sec. 20 26 320 -55 to 150 300 °C Amps STATIC ELECTRICAL CHARACTERISTICS Symbol IF = 30A VF Forward Voltage IF = 60A IF = 30A, TJ = 125°C IRM CT Maximum Reverse Leakage Current Junction Capacitance, VR = 200V APT Website - http://www.advancedpower.com MIN TYP MAX UNIT 3.2 4.2 2.4 4.0 Volts VR = VR Rated, TJ = 125°C 500 43 µA pF 053-3007 Rev B 8-2004 VR = VR Rated 250 DYNAMIC CHARACTERISTICS Symbol trr trr Qrr IRRM trr Qrr IRRM trr Qrr IRRM Characteristic Test Conditions MIN TYP APT30DS60B_S MAX UNIT ns nC Reverse Recovery Time I = 1A, di /dt = -100A/µs, V = 30V, T = 25°C F F R J Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current IF = 30A, diF/dt = -200A/µs VR = 400V, TC = 125°C IF = 30A, diF/dt = -200A/µs VR = 400V, TC = 25°C 17 24 29 2 49 180 6 28 320 21 - - Amps ns nC Amps ns nC Amps IF = 30A, diF/dt = -1000A/µs VR = 400V, TC = 125°C - THERMAL AND MECHANICAL CHARACTERISTICS Symbol RθJC RθJA WT Characteristic / Test Conditions Junction-to-Case Thermal Resistance Junction-to-Ambient Thermal Resistance Package Weight MIN TYP MAX UNIT °C/W oz g 0.95 40 0.22 5.9 10 1.1 Torque Maximum Mounting Torque lb•in N•m APT Reserves the right to change, without notice, the specifications and information contained herein. 1.00 Z JC, THERMAL IMPEDANCE (°C/W) θ 0.9 0.80 0.7 0.60 0.5 PDM 0.40 0.3 0.20 0.1 0 0.05 10-5 10-4 SINGLE PULSE 10-3 10-2 10-1 Note: t1 t2 Peak TJ = PDM x ZθJC + TC Duty Factor D = t1/t2 1.0 10 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION RC MODEL Junction temp (°C) 0.193 °C/W 0.00442 J/°C 8-2004 Power (watts) 0.589 °C/W 0.0733 J/°C 053-3007 Rev B 0.191 °C/W Case temperature (°C) 1.19 J/°C FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL TYPICAL PERFORMANCE CURVES 100 trr, REVERSE RECOVERY TIME (ns) 60 50 40 30 20 10 0 APT30DS60B_S TJ = 125° C VR = 400V 60A 30A 15A IF, FORWARD CURRENT (A) 80 TJ = 150°C 60 TJ = 125°C 40 TJ = 25°C 20 TJ = -55°C 0 1 2 3 4 5 6 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage TJ = 125° C VR = 400V 0 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE(A/ µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change 25 IRRM, REVERSE RECOVERY CURRENT (A) TJ = 125° C VR = 400V 400 Qrr, REVERSE RECOVERY CHARGE (nC) 60A 350 300 60A 30A 20 250 200 150 100 50 0 15A 15 30A 10 15A 5 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 Qrr trr trr Qrr 0 200 400 600 800 1000 1200 -diF /dt, CURRENT RATE OF CHANGE (A/ µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 30 25 20 IF(AV) (A) 0 Kf, DYNAMIC PARAMETERS (Normalized to 800A/µs) 15 10 5 0 Duty cycle = 0.5 TJ = 150°C IRRM 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 250 CJ, JUNCTION CAPACITANCE (pF) 0 50 75 100 125 150 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 25 200 150 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 0 .4 1 053-3007 Rev B 50 8-2004 100 APT30DS60B_S Vr +18V 0V D.U.T. 30µH trr/Qrr Waveform diF /dt Adjust APT6017BLL PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 2 3 4 IF - Forward Conduction Current diF /dt - Rate of Diode Current Change Through Zero Crossing. IRRM - Maximum Reverse Recovery Current. Zero 1 4 5 3 2 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. Qrr - Area Under the Curve Defined by IRRM and trr. 0.25 IRRM 5 Figure 10, Diode Reverse Recovery Waveform and Definitions TO-247 Package Outline 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 6.15 (.242) BSC 20.80 (.819) 21.46 (.845) 3.50 (.138) 3.81 (.150) 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244) D PAK Package Outline 4.90 (.193) 5.10 (.201) 1.45 (.057) 1.60 (.063) 15.85 (.624) 16.05(.632) 1.00 (.039) 1.15(.045) 13.30 (.524) 13.60(.535) 3 18.70 (.736) 19.10 (.752) 0.40 (.016) 0.65 (.026) 12.40 (.488) 12.70 (.500) 4.50 (.177) Max. 8-2004 0.40 (.016) 0.79 (.031) 19.81 (.780) 20.32 (.800) 1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055) 0.020 (.001) 0.250 (.010) 2.70 (.106) 2.90 (.114) 1.15 (.045) 1.45 (.057) 1.20 (.047) 1.90 (.075) 1.40 (.055) 2.10 (.083) 5.45 (.215) BSC (2 Plcs.) 2.40 (.094) 2.70 (.106) (Base of Lead) 053-3007 Rev B Heat Sink (Isolated) and Leads are Plated Anode 2.21 (.087) 2.59 (.102) Cathode 10.90 (.430) BSC Dimensions in Millimeters and (Inches) Anode (Isolated) Cathode Dimensions in Millimeters (Inches) APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.