APT30GT60AR

APT30GT60AR 600V 40A Thunderbolt IGBT™ The Thunderbolt IGBT™ is a new generation of high voltage power IGBTs. Using Non-Punch Through Technology the Thunderbolt IGBT™ offers superior ruggedness and ultrafast switching speed. TO-3 (TO-204AE) • Low Forward Voltage Drop • Low Tail Current • Avalanche Rated • Hermetic Package MAXIMUM RATINGS Symbol V CES VCGR V EC VGE I C1 I C2 I CM I LM EAS PD TJ,TSTG TL Parameter Collector-Emitter Voltage • High Freq. Switching to 150KHz • Ultra Low Leakage Current • RBSOA and SCSOA Rated G E C All Ratings: TC = 25°C unless otherwise specified. APT30GT60AR UNIT Collector-Gate Voltage (RGE = 20KW) Emitter-Collector Voltage Gate-Emitter Voltage Continuous Collector Current @ TC = 25°C Continuous Collector Current @ TC = 90°C Pulsed Collector Current 1 RBSOA Clamped Inductive Load Current @ Rg = 11W TC = 125°C Single Pulse Avalanche Energy Total Power Dissipation 2 Operating and Storage Junction Temperature Range Max. Lead Temp. for Soldering: 0.063" from Case for 10 Sec. Y R A IN IM L E R P 600 600 15 ±20 40 30 80 60 65 @ TC = 25°C Volts Amps mJ Watts °C 160 -55 to 150 300 STATIC ELECTRICAL CHARACTERISTICS Symbol BVCES RBVCES VGE(TH) VCE(ON) Characteristic / Test Conditions Collector-Emitter Breakdown Voltage (VGE = 0V, I C = 0.5mA, Tj = -55°C) Collector-Emitter Reverse Breakdown Voltage (VGE = 0V, I C = 50mA) Gate Threshold Voltage (VCE = VGE, I C = 700µA, Tj = 25°C) MIN TYP MAX UNIT 600 -15 3 1.6 4 2.0 5 2.5 2.8 40 1000 ±100 µA nA 050-5971 Rev - 5-2000 Volts Collector-Emitter On Voltage (VGE = 15V, I C = I C2, Tj = 25°C) Collector-Emitter On Voltage (VGE = 15V, I C = I C2, Tj = 150°C) Collector Cut-off Current (VCE = VCES, VGE = 0V, Tj = 25°C) Collector Cut-off Current (VCE = VCES, VGE = 0V, Tj = 150°C) Gate-Emitter Leakage Current (VGE = ±20V, VCE = 0V) I CES I GES CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. APT Website - http://www.advancedpower.com USA EUROPE 405 S.W. Columbia Street Chemin de Magret Bend, Oregon 97702-1035 F-33700 Merignac - France Phone: (541) 382-8028 Phone: (33) 5 57 92 15 15 FAX: (541) 388-0364 FAX: (33) 5 56 47 97 61 DYNAMIC CHARACTERISTICS Symbol Cies Coes Cres Qg Qge Qgc td(on) tr td(off) tf td(on) tr td(off) tf Eon Eoff Ets td(on) tr td(off) tf Ets gfe Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge 3 APT30GT60AR Test Conditions Capacitance VGE = 0V VCE = 25V f = 1 MHz Gate Charge VGE = 15V VCC = 0.5VCES I C = I C2 Resistive Switching (25°C) VGE = 15V VCC = 0.8VCES I C = I C2 RG = 10W MIN TYP MAX UNIT 1600 155 90 140 60 12 14 55 190 140 18 30 ns nC pF Gate-Emitter Charge Gate-Collector ("Miller") Charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Total Switching Losses Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Y R A IN IM L E R P Inductive Switching (150°C) VCLAMP(Peak) = 0.66VCES VGE = 15V I C = I C2 R G = 10W ns 300 25 0.5 1.2 1.7 18 30 TJ = +150°C mJ Inductive Switching (25°C) VCLAMP(Peak) = 0.66VCES VGE = 15V I C = I C2 R G = 10W ns 260 20 Total Switching Losses Forward Transconductance TJ = +25°C VCE = 20V, I C = I C2 1.3 6 mJ S THERMAL CHARACTERISTICS Symbol RQJC RQJA Characteristic Junction to Case Junction to Ambient MIN TYP MAX UNIT °C/W 0.78 40 1 2 3 050-5971 Rev - 5-2000 Repetitive Rating: Pulse width limited by maximum junction temperature. IC = IC2, RGE = 25W, L = 144µH, Tj = 25°C See MIL-STD-750 Method 3471 APT Reserves the right to change, without notice, the specifications and information contained herein.