APT30M36JLL
300V 76A 0.036Ω
S G D S
POWER MOS 7
®
R
MOSFET
Power MOS 7 is a new generation of low loss, high voltage, N-Channel enhancement mode power MOSFETS. Both conduction and switching ® losses are addressed with Power MOS 7 by significantly lowering RDS(ON) ® and Qg. Power MOS 7 combines lower conduction and switching losses along with exceptionally fast switching speeds inherent with APT's patented metal gate structure. • Lower Input Capacitance • Lower Miller Capacitance • Lower Gate Charge, Qg
MAXIMUM RATINGS
Symbol VDSS ID IDM VGS VGSM PD TJ,TSTG TL IAR EAR EAS Parameter Drain-Source Voltage Continuous Drain Current @ TC = 25°C Pulsed Drain Current
1
SO
2 T-
27
"UL Recognized"
ISOTOP ®
• Increased Power Dissipation • Easier To Drive • Popular SOT-227 Package
D G S
All Ratings: TC = 25°C unless otherwise specified.
APT30M36JLL UNIT Volts Amps
300 76 304 ±30 ±40 463 3.70 -55 to 150 300 76 50
4
Gate-Source Voltage Continuous Gate-Source Voltage Transient Total Power Dissipation @ TC = 25°C Linear Derating Factor Operating and Storage Junction Temperature Range Lead Temperature: 0.063" from Case for 10 Sec. Avalanche Current
1
Volts Watts W/°C °C Amps mJ
(Repetitive and Non-Repetitive)
1
Repetitive Avalanche Energy
Single Pulse Avalanche Energy
2500
STATIC ELECTRICAL CHARACTERISTICS
Symbol BVDSS RDS(on) IDSS IGSS VGS(th) Characteristic / Test Conditions Drain-Source Breakdown Voltage (VGS = 0V, ID = 250µA) Drain-Source On-State Resistance
2
MIN
TYP
MAX
UNIT Volts
300 0.036 100 500 ±100 3 5
(VGS = 10V, ID = 38A)
Ohms µA nA Volts
7-2004 050-7152 Rev B
Zero Gate Voltage Drain Current (VDS = 300V, VGS = 0V) Zero Gate Voltage Drain Current (VDS = 240V, VGS = 0V, TC = 125°C) Gate-Source Leakage Current (VGS = ±30V, VDS = 0V) Gate Threshold Voltage (VDS = VGS, ID = 2.5mA)
CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
APT Website - http://www.advancedpower.com
DYNAMIC CHARACTERISTICS
Symbol Ciss Coss Crss Qg Qgs Qgd td(on) tr td(off) tf Eon Eoff Eon Eoff Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge
3
APT30M36JLL
Test Conditions
VGS = 0V VDS = 25V f = 1 MHz VGS = 10V VDD = 150V ID = 76A @ 25°C RESISTIVE SWITCHING VGS = 15V VDD = 150V ID = 76A @ 25°C RG = 0.6Ω 6 INDUCTIVE SWITCHING @ 25°C VDD = 200V, VGS = 15V ID = 76A, RG = 5Ω 6 INDUCTIVE SWITCHING @ 125°C VDD = 200V, VGS = 15V ID = 76A, RG = 5Ω
MIN
TYP
MAX
UNIT
6480 1540 75 115 35 45 15 28 29 5 660 790 770 740
MIN TYP MAX UNIT Amps Volts ns µC nC pF
Gate-Source Charge Gate-Drain ("Miller") Charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Turn-on Switching Energy Turn-off Switching Energy
ns
µJ
SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS
Symbol IS ISM VSD t rr Q rr
dv/ dt
Characteristic / Test Conditions Continuous Source Current (Body Diode) Pulsed Source Current Diode Forward Voltage
1 2
76 304 1.3 530 11.5 5
MIN TYP MAX
(Body Diode) (VGS = 0V, IS = - 76A)
Reverse Recovery Time (IS = -76A, dl S/dt = 100A/µs) Reverse Recovery Charge (IS = -76A, dl S/dt = 100A/µs) Peak Diode Recovery
d v/ 5 dt
V/ns
THERMAL CHARACTERISTICS
Symbol RθJC RθJA Characteristic Junction to Case Junction to Ambient UNIT °C/W
0.27 40
1 Repetitive Rating: Pulse width limited by maximum junction temperature 2 Pulse Test: Pulse width < 380 µs, Duty Cycle < 2% 3 See MIL-STD-750 Method 3471
4 Starting Tj = +25°C, L = 0.87mH, RG = 25Ω, Peak IL = 76A 5 dv/dt numbers reflect the limitations of the test circuit rather than the device itself. IS ≤ -ID76A di/dt ≤ 700A/µs VR ≤ 300V TJ ≤ 150°C 6 Eon includes diode reverse recovery. See figures 18, 20.
APT Reserves the right to change, without notice, the specifications and inforation contained herein.
0.30
Z JC, THERMAL IMPEDANCE (°C/W) θ
0.25 0.20 0.15 0.10 0.05 0
0.9
0.7
0.5 Note: 0.3
PDM t1 t2
050-7152 Rev B
7-2004
0.1 0.05 10-5 10-4 SINGLE PULSE
Peak TJ = PDM x ZθJC + TC
Duty Factor D = t1/t2
10-3 10-2 10-1 RECTANGULAR PULSE DURATION (SECONDS) FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION
1
Typical Performance Curves
Junction temp. (°C) RC MODEL
200
APT30M36JLL
VGS=15V 10V 9V
ID, DRAIN CURRENT (AMPERES)
160
0.0260
0.00119F
120
8V 7.5V 7V
Power (watts)
0.0585
0.0354F
80
0.185 Case temperature. (°C)
0.463F
40
6.5V 6V
0 0 5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) FIGURE 3, LOW VOLTAGE OUTPUT CHARACTERISTICS 1.4
V
GS
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
FIGURE 2, TRANSIENT THERMAL IMPEDANCE MODEL 250
VDS> ID (ON) x RDS (ON)MAX. 250 µSEC. PULSE TEST @
很抱歉,暂时无法提供与“APT30M36JLL”相匹配的价格&库存,您可以联系我们找货
免费人工找货