APT35GN120BG

TYPICAL PERFORMANCE CURVES ® APT35GN120B APT35GN120BG* APT35GN120B(G) 1200V *G Denotes RoHS Compliant, Pb Free Terminal Finish. Utilizing the latest Non-Punch Through (NPT) Field Stop technology, these IGBT’s have a very short, low amplitude tail current and low Eoff. The Trench Gate design results in superior VCE(on) performance. Easy paralleling results from very tight parameter distribution and slightly positive VCE(on) temperature coefficient. Built-in gate resistance ensures ultra-reliable operation. Low gate charge simplifies gate drive design and minimizes losses. TO -2 47 G C E • • • • • 1200V NPT Field Stop Trench Gate: Low VCE(on) Easy Paralleling 10µs Short Circuit Capability Intergrated Gate Resistor: Low EMI, High Reliability C G E Applications: Welding, Inductive Heating, Solar Inverters, SMPS, Motor drives, UPS MAXIMUM RATINGS Symbol VCES VGE I C1 I C2 I CM SSOA PD TJ,TSTG TL Parameter Collector-Emitter Voltage Gate-Emitter Voltage Continuous Collector Current @ TC = 25°C Continuous Collector Current @ TC = 110°C Pulsed Collector Current 1 All Ratings: TC = 25°C unless otherwise specified. APT35GN120B(G) UNIT Volts 1200 ±30 94 46 105 105A @ 1200V 379 -55 to 150 300 Amps @ TC = 150°C Switching Safe Operating Area @ TJ = 150°C Total Power Dissipation Operating and Storage Junction Temperature Range Max. Lead Temp. for Soldering: 0.063" from Case for 10 Sec. Watts °C STATIC ELECTRICAL CHARACTERISTICS Symbol V(BR)CES VGE(TH) VCE(ON) Characteristic / Test Conditions Collector-Emitter Breakdown Voltage (VGE = 0V, I C = 250µA) Gate Threshold Voltage (VCE = VGE, I C = 1mA, Tj = 25°C) MIN TYP MAX Units 1200 5 1.4 2 2 5.8 1.7 1.9 6.5 2.1 Collector-Emitter On Voltage (VGE = 15V, I C = 35A, Tj = 25°C) Collector-Emitter On Voltage (VGE = 15V, I C = 35A, Tj = 125°C) Collector Cut-off Current (VCE = 1200V, VGE = 0V, Tj = 25°C) Volts I CES I GES RGINT 100 TBD 600 6 Gate-Emitter Leakage Current (VGE = ±20V) Intergrated Gate Resistor nA Ω CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. APT Website - http://www.advancedpower.com 050-7601 Rev C 10-2005 Collector Cut-off Current (VCE = 1200V, VGE = 0V, Tj = 125°C) µA DYNAMIC CHARACTERISTICS Symbol Cies Coes Cres VGEP Qg Qge Qgc SSOA SCSOA td(on) td(off) tf Eon1 Eon2 Eoff td(on) tr td(off) tf Eon1 Eon2 Eoff tr Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Gate-to-Emitter Plateau Voltage Total Gate Charge 3 APT35GN120B(G) Test Conditions Capacitance VGE = 0V, VCE = 25V f = 1 MHz Gate Charge VCE = 600V I C = 35A TJ = 150°C, R G = 2.2Ω 7, VGE = 15V, L = 100µH,VCE = 1200V TJ = 125°C, R G = 2.2Ω 7 VCC = 960V, VGE = 15V, VGE = 15V MIN TYP MAX UNIT pF V nC 2500 150 120 9.5 220 15 130 105 10 24 22 300 55 TBD 2395 2315 24 22 365 100 TBD 3745 3435 µJ ns ns A Gate-Emitter Charge Gate-Collector ("Miller ") Charge Switching Safe Operating Area Short Circuit Safe Operating Area Turn-on Delay Time Current Rise Time Turn-off Delay Time Current Fall Time Turn-on Switching Energy Turn-off Switching Energy Turn-on Delay Time Current Rise Time Turn-off Delay Time Current Fall Time Turn-on Switching Energy Turn-off Switching Energy 44 55 4 5 µs Inductive Switching (25°C) VCC = 800V VGE = 15V I C = 35A RG = 2.2Ω 7 TJ = +25°C Turn-on Switching Energy (Diode) 6 µJ Inductive Switching (125°C) VCC = 800V VGE = 15V I C = 35A Turn-on Switching Energy (Diode) 66 TJ = +125°C RG = 2.2Ω 7 THERMAL AND MECHANICAL CHARACTERISTICS Symbol RθJC RθJC WT Characteristic Junction to Case (IGBT) Junction to Case (DIODE) Package Weight MIN TYP MAX UNIT °C/W gm .33 N/A 5.9 1 Repetitive Rating: Pulse width limited by maximum junction temperature. 2 For Combi devices, Ices includes both IGBT and FRED leakages 3 See MIL-STD-750 Method 3471. 4 Eon1 is the clam ped inductive turn-on-energy of the IGBT only, without the effect of a commutating diode reverse recovery current adding to the IGBT turn-on loss. (See Figure 24.) 5 Eon2 is the clamped inductive turn-on energy that includes a commutating diode reverse recovery current in the IGBT turn-on switching loss. (See Figures 21, 22.) 10-2005 6 Eoff is the clamped inductive turn-off energy measured in accordance with JEDEC standard JESD24-1. (See Figures 21, 23.) 7 RG is external gate resistance, not including RGint nor gate driver impedance. (MIC4452) APT Reserves the right to change, without notice, the specifications and information contained herein. 050-7601 Rev C TYPICAL PERFORMANCE CURVES 120 100 80 60 120 APT35GN120B(G) 15V 15V IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) 12V 100 80 60 40 20 0 12V 11V 10V 9V 8V 7V 11V 10V 40 9V 20 0 8V 100 FIGURE 1, Output Characteristics(TJ = 25°C) 250µs PULSE TEST