®
300V APT60D30B APT60D30BG*
60A APT60D30S APT60D30SG*
*G Denotes RoHS Compliant, Pb Free Terminal Finish.
ULTRAFAST SOFT RECOVERY RECTIFIER DIODE
TO
PRODUCT APPLICATIONS
• Anti-Parallel Diode -Switchmode Power Supply -Inverters • Free Wheeling Diode -Motor Controllers -Converters -Inverters • Snubber Diode • PFC
PRODUCT FEATURES
• Ultrafast Recovery Times • Soft Recovery Characteristics
PRODUCT BENEFITS
• Low Losses • Low Noise Switching
1 2
-2 4
7
D3PAK
• Cooler Operation • Popular TO-247 Package or Surface Mount D3PAK Package • Higher Reliability Systems • Low Forward Voltage • Low Leakage Current • Increased System Power Density
1
2
1
2
1 - Cathode 2 - Anode Back of Case - Cathode
MAXIMUM RATINGS
Symbol VR VRRM VRWM IF(AV) IF(AV) IFSM TJ,TSTG TL Characteristic / Test Conditions Maximum D.C. Reverse Voltage Maximum Peak Repetitive Reverse Voltage Maximum Working Peak Reverse Voltage
All Ratings: TC = 25°C unless otherwise specified.
APT60D30B(G)_S(G) UNIT
300
Volts
Maximum Average Forward Current (TC = 143°C, Duty Cycle = 0.5) RMS Forward Current (Square wave, 50% duty) Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) Operating and StorageTemperature Range Lead Temperature for 10 Sec.
60 142 600 -55 to 175 300
°C Amps
STATIC ELECTRICAL CHARACTERISTICS
Symbol Characteristic / Test Conditions IF = 60A VF Forward Voltage IF = 120A IF = 60A, TJ = 125°C IRM CT Maximum Reverse Leakage Current Junction Capacitance, VR = 200V
APT Website - http://www.advancedpower.com
MIN
TYP
MAX
UNIT
1.2 1.5 1.0
1.4
Volts
VR = VR Rated VR = VR Rated, TJ = 125°C
250 500 150
µA pF
6-2005 053-4052 Rev C
DYNAMIC CHARACTERISTICS
Symbol trr trr Qrr IRRM trr Qrr IRRM trr Qrr IRRM Characteristic Reverse Recovery Time Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current IF = 60A, diF/dt = -800A/µs VR = 200V, TC = 125°C IF = 60A, diF/dt = -200A/µs VR = 200V, TC = 125°C IF = 60A, diF/dt = -200A/µs VR = 200V, TC = 25°C Test Conditions IF = 1A, diF/dt = -100A/µs, VR = 30V, TJ = 25°C MIN -
APT60D30B(G)_S(G)
TYP MAX UNIT ns nC
29 38 75 4 80 370 8 55 740 23 -
-
Amps ns nC Amps ns nC Amps
THERMAL AND MECHANICAL CHARACTERISTICS
Symbol RθJC RθJA WT Characteristic / Test Conditions Junction-to-Case Thermal Resistance Junction-to-Ambient Thermal Resistance Package Weight MIN TYP MAX UNIT °C/W oz g
.34 40 0.22 5.9 10 1.1
lb•in N•m
Torque
Maximum Mounting Torque
APT Reserves the right to change, without notice, the specifications and information contained herein. 0.35 Z JC, THERMAL IMPEDANCE (°C/W) θ 0.30 0.25 0.20 0.5 0.15 0.10 0.05 0 0.3
Note:
0.9
0.7
PDM
t1 t2
0.1 0.05 10
-5
SINGLE PULSE 10
-4
Duty Factor D = 1/t2 Peak TJ = PDM x ZθJC + TC
t
10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION
RC MODEL Junction temp (°C)
6-2005
0.129 °C/W Power (watts) 0.211 °C/W Case temperature (°C)
0.0107 J/°C
053-4052 Rev C
0.120 J/°C
FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL
TYPICAL PERFORMANCE CURVES
180 160 IF, FORWARD CURRENT (A) 140 120 100 80 60 40 20 0 0 TJ = 150°C TJ = 25°C TJ = 125°C TJ = -55°C trr, REVERSE RECOVERY TIME (ns)
100 90 80 70 60 50 40 30 20 10
APT60D30B(G)_S(G)
T = 125°C J V = 200V
R
120A 60A 30A
0.5 1 1.5 2 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage 1000 Qrr, REVERSE RECOVERY CHARGE (nC)
T = 125°C J V = 200V
R
0 200 400 600 800 1000 -diF /dt, CURRENT RATE OF CHANGE(A/µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change IRRM, REVERSE RECOVERY CURRENT (A) 25
T = 125°C J V = 200V
R
0
120A
800
120A 60A
20
600
15
60A
400
30A
10
30A
200
5
0 200 400 600 800 1000 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 1.4
0
0 200 400 600 800 1000 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 160
Duty cycle = 0.5 T = 175°C
J
0
Kf, DYNAMIC PARAMETERS (Normalized to 800A/µs)
1.2 1.0 0.8 0.6 0.4 0.2 trr IRRM trr
Qrr
140 120
IF(AV) (A)
100 80 60
Qrr
40 20
25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature
900
0.0
0
75 100 125 150 175 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature
0
25
50
CJ, JUNCTION CAPACITANCE (pF)
800 700 600 500 400 300 200 100 6-2005
10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage
0
1
053-4052 Rev C
Vr +18V 0V D.U.T. 30µH diF /dt Adjust
APT30M36LLL
APT60D30B(G)_S(G)
trr/Qrr Waveform
PEARSON 2878 CURRENT TRANSFORMER
Figure 9. Diode Test Circuit
1 2 3 4
IF - Forward Conduction Current diF /dt - Rate of Diode Current Change Through Zero Crossing. IRRM - Maximum Reverse Recovery Current. Zero
1
4
5 3 2
trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. Qrr - Area Under the Curve Defined by IRRM and trr.
0.25 IRRM
5
Figure 10, Diode Reverse Recovery Waveform and Definitions
TO-247 Package Outline
e1 SAC: Tin, Silver, Copper
4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 6.15 (.242) BSC 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244)
D PAK Package Outline
e3 100% Sn
4.90 (.193) 5.10 (.201) 1.45 (.057) 1.60 (.063) 15.85 (.624) 16.05(.632) 13.30 (.524) 13.60(.535)
3
Cathode (Heat Sink)
1.00 (.039) 1.15(.045)
Cathode
20.80 (.819) 21.46 (.845) 3.50 (.138) 3.81 (.150)
18.70 (.736) 19.10 (.752) 0.40 (.016) 0.65 (.026)
12.40 (.488) 12.70 (.500)
6-2005
4.50 (.177) Max. 0.40 (.016) 0.79 (.031) 1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055)
19.81 (.780) 20.32 (.800)
0.020 (.001) 0.250 (.010) 2.70 (.106) 2.90 (.114)
1.15 (.045) 1.45 (.057)
1.20 (.047) 1.90 (.075) 1.40 (.055) 2.10 (.083) 5.45 (.215) BSC (2 Plcs.)
2.40 (.094) 2.70 (.106) (Base of Lead)
053-4052 Rev C
Anode
2.21 (.087) 2.59 (.102)
Heat Sink (Cathode) and Leads are Plated
Cathode
10.90 (.430) BSC
Dimensions in Millimeters and (Inches)
Anode Cathode Dimensions in Millimeters (Inches)
APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.
