APT60D30LCT

® 300V 2x60A APT60D30LCT APT60D30LCTG* *G Denotes RoHS Compliant, Pb Free Terminal Finish. ULTRAFAST SOFT RECOVERY RECTIFIER DIODE PRODUCT APPLICATIONS • Anti-Parallel Diode -Switchmode Power Supply -Inverters • Free Wheeling Diode -Motor Controllers -Converters -Inverters • Snubber Diode • PFC PRODUCT FEATURES • Ultrafast Recovery Times • Soft Recovery Characteristics • Popular TO-264 Package • Low Forward Voltage • Low Leakage Current PRODUCT BENEFITS • Low Losses • Low Noise Switching • Cooler Operation • Higher Reliability Systems • Increased System Power Density 1 TO - 26 4 2 3 1 2 3 1 - Anode 1 2 - Common Cathode Back of Case - Cathode 3 - Anode 2 MAXIMUM RATINGS Symbol VR VRRM VRWM IF(AV) IF(AV) IFSM TJ,TSTG TL Characteristic / Test Conditions Maximum D.C. Reverse Voltage Maximum Peak Repetitive Reverse Voltage Maximum Working Peak Reverse Voltage All Ratings Per Leg: TC = 25°C unless otherwise specified. APT60D30LCT(G) UNIT 300 Volts Maximum Average Forward Current (TC = 143°C, Duty Cycle = 0.5) RMS Forward Current (Square wave, 50% duty) Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms) Operating and StorageTemperature Range Lead Temperature for 10 Sec. 60 142 600 -55 to 175 300 °C Amps STATIC ELECTRICAL CHARACTERISTICS Symbol Characteristic / Test Conditions IF = 60A VF Forward Voltage IF = 120A IF = 60A, TJ = 125°C IRM CT Maximum Reverse Leakage Current Junction Capacitance, VR = 200V APT Website - http://www.advancedpower.com MIN TYP MAX UNIT 1.2 1.5 1.0 1.4 Volts VR = VR Rated VR = VR Rated, TJ = 125°C 250 500 150 053-4053 Rev B pF 4-2005 µA DYNAMIC CHARACTERISTICS Symbol trr trr Qrr IRRM trr Qrr IRRM trr Qrr IRRM Characteristic Reverse Recovery Time Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current IF = 60A, diF/dt = -800A/µs VR = 200V, TC = 125°C IF = 60A, diF/dt = -200A/µs VR = 200V, TC = 125°C IF = 60A, diF/dt = -200A/µs VR = 200V, TC = 25°C Test Conditions IF = 1A, diF/dt = -100A/µs, VR = 30V, TJ = 25°C MIN TYP APT60D30LCT(G) MAX UNIT ns nC 29 38 75 4 80 370 8 55 740 23 - - Amps ns nC Amps ns nC Amps THERMAL AND MECHANICAL CHARACTERISTICS Symbol RθJC RθJA WT Characteristic / Test Conditions Junction-to-Case Thermal Resistance Junction-to-Ambient Thermal Resistance Package Weight MIN TYP MAX UNIT °C/W oz g .34 40 0.22 5.9 10 1.1 lb•in N•m Torque Maximum Mounting Torque APT Reserves the right to change, without notice, the specifications and information contained herein. 0.35 Z JC, THERMAL IMPEDANCE (°C/W) θ 0.30 0.25 0.20 0.5 0.15 0.10 0.05 0 0.3 Note: 0.9 0.7 PDM t1 t2 0.1 0.05 10 -5 SINGLE PULSE 10 -4 Duty Factor D = 1/t2 Peak TJ = PDM x ZθJC + TC t 10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION RC MODEL Junction temp (°C) 4-2005 0.129 °C/W Power (watts) 0.211 °C/W Case temperature (°C) 0.0107 J/°C 053-4053 Rev B 0.120 J/°C FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL TYPICAL PERFORMANCE CURVES 180 160 IF, FORWARD CURRENT (A) 140 120 100 80 60 40 20 0 0 TJ = 150°C TJ = 25°C TJ = 125°C TJ = -55°C trr, REVERSE RECOVERY TIME (ns) 100 90 80 70 60 50 40 30 20 10 APT60D30LCT(G) T = 125°C J V = 200V R 120A 60A 30A 0.5 1 1.5 2 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage 1000 Qrr, REVERSE RECOVERY CHARGE (nC) T = 125°C J V = 200V R 0 200 400 600 800 1000 -diF /dt, CURRENT RATE OF CHANGE(A/µs) Figure 3. Reverse Recovery Time vs. Current Rate of Change IRRM, REVERSE RECOVERY CURRENT (A) 25 T = 125°C J V = 200V R 0 120A 800 120A 60A 20 600 15 60A 400 30A 10 30A 200 5 0 200 400 600 800 1000 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 1.4 0 0 200 400 600 800 1000 -diF /dt, CURRENT RATE OF CHANGE (A/µs) Figure 5. Reverse Recovery Current vs. Current Rate of Change 160 Duty cycle = 0.5 T = 175°C J 0 Kf, DYNAMIC PARAMETERS (Normalized to 800A/µs) 1.2 1.0 0.8 0.6 0.4 0.2 trr IRRM trr Qrr 140 120 IF(AV) (A) 100 80 60 Qrr 40 20 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 6. Dynamic Parameters vs. Junction Temperature 900 0.0 0 75 100 125 150 175 Case Temperature (°C) Figure 7. Maximum Average Forward Current vs. CaseTemperature 0 25 50 CJ, JUNCTION CAPACITANCE (pF) 800 700 600 500 400 300 200 100 4-2005 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage 0 1 053-4053 Rev B Vr +18V 0V D.U.T. 30µH diF /dt Adjust APT30M36LLL APT60D30LCT(G) trr/Qrr Waveform PEARSON 2878 CURRENT TRANSFORMER Figure 9. Diode Test Circuit 1 2 3 4 IF - Forward Conduction Current diF /dt - Rate of Diode Current Change Through Zero Crossing. IRRM - Maximum Reverse Recovery Current. Zero 1 4 5 3 2 trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. Qrr - Area Under the Curve Defined by IRRM and trr. 0.25 IRRM 5 Figure 10, Diode Reverse Recovery Waveform and Definitions TO-264 (LCT) Package Outline e1 SAC: Tin, Silver, Copper 4.60 (.181) 5.21 (.205) 1.80 (.071) 2.01 (.079) 19.51 (.768) 20.50 (.807) 3.10 (.122) 3.48 (.137) 5.79 (.228) 6.20 (.244) Common Cathode 25.48 (1.003) 26.49 (1.043) 2.29 (.090) 2.69 (.106) 19.81 (.780) 21.39 (.842) 2.29 (.090) 2.69 (.106) 4-2005 Anode 1 Common Cathode Anode 2 053-4053 Rev B 0.48 (.019) 0.84 (.033) 2.59 (.102) 3.00 (.118) 0.76 (.030) 1.30 (.051) 2.79 (.110) 3.18 (.125) 5.45 (.215) BSC 2-Plcs. Dimensions in Millimeters and (Inches) APT’s products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.