APT8024JLL
800V 29A 0.240Ω
POWER MOS 7
®
R
MOSFET
G
S D
S
Power MOS 7 is a new generation of low loss, high voltage, N-Channel enhancement mode power MOSFETS. Both conduction and switching ® losses are addressed with Power MOS 7 by significantly lowering RDS(ON) ® and Qg. Power MOS 7 combines lower conduction and switching losses along with exceptionally fast switching speeds inherent with APT's patented metal gate structure. • Lower Input Capacitance • Lower Miller Capacitance • Lower Gate Charge, Qg
MAXIMUM RATINGS
Symbol VDSS ID IDM VGS VGSM PD TJ,TSTG TL IAR EAR EAS Parameter Drain-Source Voltage Continuous Drain Current @ TC = 25°C Pulsed Drain Current
1
SO
2 T-
27
"UL Recognized"
ISOTOP ®
• Increased Power Dissipation • Easier To Drive • Popular SOT-227 Package
D G S
All Ratings: TC = 25°C unless otherwise specified.
APT8024JLL UNIT Volts Amps
800 29 116 ±30 ±40 460 3.68 -55 to 150 300 29 50
4
Gate-Source Voltage Continuous Gate-Source Voltage Transient Total Power Dissipation @ TC = 25°C Linear Derating Factor Operating and Storage Junction Temperature Range Lead Temperature: 0.063" from Case for 10 Sec. Avalanche Current
1
Volts Watts W/°C °C Amps mJ
(Repetitive and Non-Repetitive)
1
Repetitive Avalanche Energy
Single Pulse Avalanche Energy
2500
STATIC ELECTRICAL CHARACTERISTICS
Symbol BVDSS RDS(on) IDSS IGSS VGS(th) Characteristic / Test Conditions Drain-Source Breakdown Voltage (VGS = 0V, ID = 250µA) Drain-Source On-State Resistance
2
MIN
TYP
MAX
UNIT Volts
800 0.240 100 500 ±100 3 5
(VGS = 10V, ID = 14.5A)
Ohms µA nA Volts
9-2004 050-7075 Rev B
Zero Gate Voltage Drain Current (VDS = 800V, VGS = 0V) Zero Gate Voltage Drain Current (VDS = 640V, VGS = 0V, TC = 125°C) Gate-Source Leakage Current (VGS = ±30V, VDS = 0V) Gate Threshold Voltage (VDS = VGS, ID = 2.5mA)
CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
APT Website - http://www.advancedpower.com
DYNAMIC CHARACTERISTICS
Symbol C iss Coss C rss Qg Qgs Qgd td(on) tr td(off) tf Eon Eoff Eon Eoff Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge
3
APT8024JLL
Test Conditions
VGS = 0V VDS = 25V f = 1 MHz VGS = 10V VDD = 400V ID = 29A @ 25°C RESISTIVE SWITCHING VGS = 15V VDD = 400V ID = 29A @ 25°C RG = 0.6Ω 6 INDUCTIVE SWITCHING @ 25°C VDD = 533V, VGS = 15V ID = 29A, RG = 5Ω 6 INDUCTIVE SWITCHING @ 125°C VDD = 533V VGS = 15V ID = 29A, RG = 5Ω
MIN
TYP
MAX
UNIT
4670 860 155 160 24 105 9 5 23 4 605 490 975 585
MIN TYP MAX UNIT Amps Volts ns µC nC pF
Gate-Source Charge Gate-Drain ("Miller ") Charge Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Switching Energy Turn-off Switching Energy Turn-on Switching Energy Turn-off Switching Energy
ns
µJ
SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS
Symbol IS ISM VSD t rr Q rr
dv/ dt
Characteristic / Test Conditions Continuous Source Current (Body Diode) Pulsed Source Current Diode Forward Voltage
1 2
29 116 1.3 850 22 10
MIN TYP MAX
(Body Diode) (VGS = 0V, IS = - 29A)
Reverse Recovery Time (IS = -29A, dl S/dt = 100A/µs) Reverse Recovery Charge (IS = -29A, dl S/dt = 100A/µs) Peak Diode Recovery
dv/ dt 5
V/ns
THERMAL CHARACTERISTICS
Symbol RθJC RθJA Characteristic Junction to Case Junction to Ambient UNIT °C/W
0.27 40
1 Repetitive Rating: Pulse width limited by maximum junction temperature 2 Pulse Test: Pulse width < 380 µs, Duty Cycle < 2% 3 See MIL-STD-750 Method 3471
4 Starting Tj = +25°C, L = 5.95mH, RG = 25Ω, Peak IL = 29A 5 dv/dt numbers reflect the limitations of the test circuit rather than the device itself. IS ≤ -ID29A di/dt ≤ 700A/µs VR ≤ VDSS TJ ≤ 150°C 6 Eon includes diode reverse recovery. See figures 18, 20.
APT Reserves the right to change, without notice, the specifications and information contained herein.
0.3
Z JC, THERMAL IMPEDANCE (°C/W) θ
0.25
0.9
0.20
0.7
0.15
0.5 Note:
PDM
9-2004
0.10 0.05 0
0.3
t1 t2
050-7075 Rev B
0.1 0.05 10-5 10-4 SINGLE PULSE
Duty Factor D = t1/t2 Peak TJ = PDM x ZθJC + TC
10-3 10-2 10-1 RECTANGULAR PULSE DURATION (SECONDS) FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION
1.0
Typical Performance Curves
Junction temp. (°C) RC MODEL
80 70 60 50 40 30 20 10 0 0 7V VGS =15 &10 V 8V
APT8024JLL
ID, DRAIN CURRENT (AMPERES)
0.0409
0.0246F
7.5V
Power (watts)
0.225
0.406F
6.5V 6V 5.5V
0.00361 Case temperature. (°C)
148F
FIGURE 2, TRANSIENT THERMAL IMPEDANCE MODEL
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
100
VDS> ID (ON) x RDS (ON)MAX. 250µSEC. PULSE TEST @
很抱歉,暂时无法提供与“APT8024JLL”相匹配的价格&库存,您可以联系我们找货
免费人工找货