APTGT100SK60T

APTGT100SK60T Buck chopper Trench + Field Stop IGBT® Power Module VBUS Q1 G1 NT C2 VCES = 600V IC = 100A @ Tc = 80°C Applicatio n • AC and DC motor control • Switched Mode Power Supplies Features • Trench + Field Stop IGBT® Technology - Low voltage drop - Low tail current - Switching frequency up to 20 kHz - Soft recovery parallel diodes - Low diode VF - Low leakage current - Avalanche energy rated - RBSOA and SCSOA rated • Kelvin emitter for easy drive • Very low stray inductance - Symmetrical design - Lead frames for power connections • High level of integration • Internal thermistor for temperature monitoring Benefits • Stable temperature behavior • Very rugged • Solderable terminals for easy PCB mounting • Direct mounting to heatsink (isolated package) • Low junction to case thermal resistance • Easy paralleling due to positive TC of VCEsat • Low profile E1 OUT 0/VBU S SENSE 0/VBU S NT C1 0/VBUS SENSE OUT VBUS 0/VBUS OUT E1 G1 0/VBUS SENSE NTC2 NTC1 Absolute maximum ratings Symbol VCES IC ICM VGE PD RBSOA Parameter Collector - Emitter Breakdown Voltage Continuous Collector Current Pulsed Collector Current Gate – Emitter Voltage Maximum Power Dissipation TC = 25°C TC = 80°C TC = 25°C TC = 25°C Tj = 150°C Reverse Bias Safe Operating Area 200A @ 550V These Devices are sensitive to Electrostatic Discharge. Proper Handing Procedures Should Be Followed. APT website – http://www.advancedpower.com 1-5 APTGT100SK60T – Rev 0 May, 2005 Max ratings 600 150 100 200 ±20 340 Unit V A V W APTGT100SK60T All ratings @ Tj = 25°C unless otherwise specified Electrical Characteristics Symbol Characteristic ICES VCE(sat) VGE(th) IGES Zero Gate Voltage Collector Current Collector Emitter Saturation Voltage Gate Threshold Voltage Gate – Emitter Leakage Current Test Conditions VGE = 0 V, VCE = 600V Tj = 25°C VGE =15V IC = 100A Tj = 150°C VGE = VCE , IC = 1.5 mA VGE = 20V, VCE = 0 V Min Typ 1.5 1.7 5.8 Max 250 1.9 6.5 400 Unit µA V V nA 5.0 Dynamic Characteristics Symbol Cies Coes Cres Td(on) Tr Td(off) Tf Td(on) Tr Td(off) Tf Eon Eoff Characteristic Input Capacitance Output Capacitance Reverse Transfer Capacitance Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time Turn on Energy Turn off Energy Test Conditions VGE = 0 V VCE = 25V f = 1MHz Inductive Switching (25°C) VGE = ±15V VBus = 300V IC = 100A R G = 10Ω Inductive Switching (150°C) VGE = ±15V VBus = 300V IC = 100A R G = 10Ω Min Typ 6100 390 190 115 45 225 55 130 50 300 70 1.8 3.5 Max Unit pF ns ns mJ Chopper diode ratings and characteristics Symbol Characteristic VRRM Maximum Peak Repetitive Reverse Voltage IRM IF(A V) VF trr Qrr Maximum Reverse Leakage Current Maximum Average Forward Current Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Test Conditions VR=600V Tj = 25°C Tj = 150°C Tc = 80°C Tj = 25°C Tj = 150°C Tj = 25°C Tj = 150°C Tj = 25°C Tj = 150°C Min 600 Typ Max 250 500 Unit V µA A 50% duty cycle IF = 100A VGE = 0 V IF = 100A VR = 300V di/dt =2000A/µs 100 1.6 1.5 125 220 4.7 9.9 2 V ns µC APTGT100SK60T – Rev 0 May, 2005 APT website – http://www.advancedpower.com 2-5 APTGT100SK60T Temperature sensor NTC (see application note APT0406 on www.advancedpower.com for more information). Symbol Characteristic R25 Resistance @ 25°C B 25/85 T25 = 298.15 K Min Typ 50 3952 Max Unit kΩ K RT = R 25   1 1  RT : Thermistor value at T exp B 25 / 85    T − T    25  T: Thermistor temperature Thermal and package characteristics Symbol Characteristic RthJC VISOL TJ TSTG TC Torque Wt Junction to Case Operating junction temperature range Storage Temperature Range Operating Case Temperature Mounting torque Package Weight IGBT Diode Min Typ Max 0.44 0.77 175 125 100 4.7 160 Unit °C/W V °C N.m g RMS Isolation Voltage, any terminal to case t =1 min, I isol