0090-3111-185

SD0090-3111-185 FEATURES ▪ Low Noise ▪ Low Dark Current and Capacitance ▪ High Sensitivity ▪ Detection in SWIR DESCRIPTION The SD0090-3111-185 is a high sensitivity, low noise, 0.3 mm diameter active area InGaAs photodiode for detection at SWIR, NIR wavelengths for imaging and sensing applications. The photodetector is assembled in an 1206 package. APPLICATIONS ▪ Industrial Sensing ▪ Security ▪ Communication ▪ Medical > Absolute Maximum Ratings Part No. SD0090-3111-185 Wavelength Range [nm] 900 to 1700 Reverse Voltage [V] 20 Operating Temperature [C] -40 to +100 Storage Temperature [C] -55 to +125 Package 1206 > Electrical and Optical Characteristics Typical Characteristics (T=23°C unless specified) Parameter Test Conditions Breakdown Voltage IR=1µA Dark Current VR=10V Forward Voltage If=3mA Diode Capacitance VR=5V, F=1MHz Full Width at Halt Max. Shunt Resistance V=10mA VR=5V, λ=1300nm Responsitivity VR=5V, λ=1500nm Symbol VBD Id Vf CD φ Rs R Min 20 40 0.9 0.95 Typical 0.2 0.6 5 65 0.95 1 Max 1 0.8 6 - Unit V nA V pF +/- deg MΩ A/W > Soldering Wave IR Oven Reflow Forced Convection Reflow Convection Reflow Vapor Phase Reflow Manual Moisture Sensitivity Level Recommendation Not Advised Allowed Recommended Recommended Recommended Allowed 3 See Reflow Profile See Reflow Profile See Reflow Profile See Reflow Profile 260°C for 3 seconds max. J-STD-033 Page 1 Advanced Photonix, 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 http://www.advancedphotonix.com/ Rev 6/25/2019 © 2018 Advanced Photonix. All rights reserved. SD0090-3111-185 > Spectral Response > 1206 Package >Soldering Conditions: 260˚C 1/16 inch away from case for 3 seconds max. Page 2 Advanced Photonix, 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 http://www.advancedphotonix.com/ Rev 6/25/2019 © 2018 Advanced Photonix. All rights reserved. SD0090-3111-185 LEGAL DISCLAIMER All products, product specifications, and data are subject to change without notice to improve reliability, function, design, or otherwise. Advanced Photonix, its affiliates, agents, employees and all persons acting on its or their behalf (collectively, “Advanced Photonix”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Advanced Photonix makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Advanced Photonix disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability Statements regarding the suitability of products for certain types of applications are based on Advanced Photonix’s knowledge of typical requirements that are often placed on Advanced Photonix products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Advanced Photonix’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Advanced Photonix products are not designed for use in life-saving, or life-sustaining applications, or for any other application in which the failure of the Advanced Photonix product could result in personal injury or death. Customers using or selling Advanced Photonix products not expressly indicated for use in such applications do so at their own risk. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Advanced Photonix. Product names and markings noted herein may be trademarks of their respective owners. MATERIALS SAFETY This product is free of conflict minerals and meets REACH compliance. Please see website for reports. Page 3 Advanced Photonix, 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 http://www.advancedphotonix.com/ Rev 6/25/2019 © 2018 Advanced Photonix. All rights reserved.