LS-0405-015

LS-0405 Series FEATURES  405nm Peak Wavelength  Long Life  RoHS Compliant DESCRIPTION The LS-0405 Series are InGaN UV LEDs with peak wavelength of 405nm. Available in a TO-46 lens cap and a TO-46 glob top. These LEDs have a long operating life and are more environmentally friendly than traditional mercury UV lamps. > Absolute Maximum Ratings Part No. Reverse Voltage [V] LS-0405-014 5 LS-0405-015 APPLICATIONS  Industrial Curing  Dental Curing  Epoxy, Ink, and Coating Curing  Currency Validation  Forensics Equipment Operating Temperature [C] -40 to +100 -40 to +85 Storage Temperature [C] -40 to +125 Package Lens Cap Glob Top > Electrical and Optical Characteristics Typical Characteristics (T=23°C unless specified) Parameter Test Conditions If = 20 mA Forward Voltage Symbol Min Typical Max Unit VF - 3.5 3.8 V Reverse Current VR=5V IR - - 1 µA Peak Wavelength If = 20 mA λp 400 405 410 nm Spectral Halfwidth If = 20 mA Δλ - 30 - nm Optical Power Output If = 20 mA Фe 4 - 6 mW Page 1 Advanced Photonix, 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 http://www.advancedphotonix.com/ Rev 9/18/2018 © 2018 Advanced Photonix. All rights reserved. LS-0405Series > TO-46 Lens Cap [LS-0405-014] > TO-46 Glob Top [LS-0405-015] >Soldering Conditions: 260˚C 1/16 inch away from case for 3 seconds max. Page 2 Advanced Photonix, 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 http://www.advancedphotonix.com/ Rev 9/18/2018 © 2018 Advanced Photonix. All rights reserved. LS-0405Series LEGAL DISCLAIMER All products, product specifications, and data are subject to change without notice to improve reliability, function, design, or otherwise. Advanced Photonix, its affiliates, agents, employees and all persons acting on its or their behalf (collectively, “Advanced Photonix”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Advanced Photonix makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Advanced Photonix disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability Statements regarding the suitability of products for certain types of applications are based on Advanced Photonix’s knowledge of typical requirements that are often placed on Advanced Photonix products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Advanced Photonix’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Advanced Photonix products are not designed for use in life-saving, or life-sustaining applications, or for any other application in which the failure of the Advanced Photonix product could result in personal injury or death. Customers using or selling Advanced Photonix products not expressly indicated for use in such applications do so at their own risk. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Advanced Photonix. Product names and markings noted herein may be trademarks of their respective owners. MATERIALS SAFETY This product is free of conflict minerals and meets REACH compliance. Please see website for reports. Page 3 Advanced Photonix, 1240 Avenida Acaso, Camarillo CA 93012 • Phone (805) 987-0146 http://www.advancedphotonix.com/ Rev 9/18/2018 © 2018 Advanced Photonix. All rights reserved.