PDV-P8101

CdS Photoconductive Photocells PDV-P8101 PACKAGE DIMENSIONS INCH [mm] PACKAGE DIMENSIONS INCH [mm] ±.010 [0.25] .169 [4.29] +.015 [0.38] -.010 [0.25] .079 [2.00] EPOXY ON LEADS 3 mm MAX 2X Ø.016 [0.40] .134 [3.40] ±.010 [0.25] Ø.200 [5.08] PLASTIC COATED 2X 1.023 [26.0] CERAMIC PACKAGE FEATURES • Visible light response • Sintered construction • Low cost DESCRIPTION APPLICATIONS The PDV-P8101 are (CdS), Photoconductive • Camera exposure photocells designed to sense light from 400 to 700 • Shutter controls nm. These light dependent resistors are available in • Night light Controls a wide range of resistance values. They’re packaged in a two leaded plastic-coated ceramic header. CELL RESISTANCE VS. ILLUMINANCE 1000 Resistance in Kohms ABSOLUTE MAXIMUM RATING (TA)= 23°C UNLESS OTHERWISE NOTED SYMBOL Vpk Pd Δpo/Δt TO TS PARAMETER Applied Voltage Continuous Power Dissipation Operating and Storage Temperature Soldering Temperature* -30 MIN MAX 150 100 +75 +260 UNITS V mW/°C °C °C 100 10 1 1 10 Illum inance in lux 100 * 0.200 inch from base for 3 seconds with heat sink. ELECTRO-OPTICAL CHARACTERISTICS RATING (TA)= 23°C UNLESS OTHERWISE NOTED SYMBOL RD RI S lrange lpeak tr Tf CHARACTERISTIC Dark Resistance Illuminated Resistance TEST CONDITIONS MIN 0.15 4 0.65 400 520 55 20 700 TYP MAX 11 After 10 sec. @ 10 Lux @ 2856 °K 10 Lux @ 2856 °K LOG(R100)-LOG(R10)** Sensitivity LOG(E100)-LOG(E10)*** Spectral Application Range Flooded Spectral Application Range Flooded Rise Time 10 Lux @ 2856 °K Fall Time After 10 Lux @ 2856 °K UNITS MW KW W/Lux nm nm ms ms **R100, R10: cell resistances at 100 Lux and 10 Lux at 2856 °K respectively . ***E100, E10: luminances at 100 Lux and 10 Lux 2856 °K respectively. Information in this technical datasheet is believed to be correct and reliable. However, no responsibility is assumed for possible inaccuracies or omission. Specifications are subject to change without notice. REV 3/30/06