105TX-POE

THE INDUSTRIAL NETWORK COMPANY ® The N-TRON 105TX-POE Unmanaged Industrial Ethernet Switch is designed to trasmit power, along with data, over an Ethernet network and is ideal for PoE capable devices where running an AC power feed is either not possible or cost effective. This feature allows an end user to power a PoE camera, wireless access point, or any other PoE capable device without the need for running separate wires for power. This also allows the ability for a centralized battery backup for all these devices. PRODUCT FEATURES • Compact, Space Saving Package • Full IEEE 802.3 and 802.3af Compliance • American Bureau of Shipping (ABS) Type Approval • EN50155 for Railway applications • Five 10/100BaseTX RJ-45 Ports (4 PoE Ports) • Unmanaged Operation • Extended Environmental Specifications • -40ºC to 85º Operating Temperature • Automatic Detection of Connected PoE Devices • Support for Full/Half Duplex Operation • Auto-sensing Duplex, Speed, and MDIX • Up to 1.0 Gb/s Maximum Throughput • Full Wire Speed Communications • Supports 15.4 Watts per port (13 Watts at the PD) • Redundant Power Inputs (46-49 VDC) • Power Fault Status LED's • LED Link/Activity Status Indication • LED PoE Status Indication • Hardened Metal DIN-Rail Enclosure PRODUCT OVERVIEW The 105TX-POE Industrial Network Switch is designed to meet the most demanding industrial communications requirements by providing high throughput and minimum downtime while also providing power to PoE capable devices over the Ethernet network. The 105TX-POE provides five RJ-45 auto sensing 10/100BaseTX ports. All ports are full/half duplex capable, using "state of the art" Ethernet switching technology. Four of the five RJ-45 ports also act as PoE ports allowing power to pass through four of the eight strands of CAT5 cable. Each PoE port supports up to 15.4 watts of power. The 105TX-POE auto-negotiates the speed and flow control capabilities of the five TX port connections, and configures itself automatically. The N-TRON 105TX-POE also supports up to 2,000 MAC addresses, enabling these products to support extremely sophisticated and complex network architectures. The 105FX-POE automatically detects any PoE device that is connected and powers it accordingly. If a PoE fault is detected on a specific port the Auto-disconnect feature disables PoE power on that port, allowing only data communications to pass. This reduces reducing the risk of damaging costly equipment. The 105TX-POE is an ideal candidate for providing data and power to wireless LAN access points, network cameras, VoIP, and other PoE capable devices. The product also helps reduce costs by eliminating the need for electrical wiring and electrician expenses. The 105TX-POE has extended operating environmental specifications to meet the harsh needs of the industrial environment. For cost savings and convenience it can be DIN-Rail mounted alongside Ethernet I/O or other Industrial Equipment. To increase reliability the 105TX-POE provides dual redundant power inputs. Two power LED's are also provided on this unit indicating a valid power source on both the redundant power inputs and also indicating when a power fault bus occurs. THE INDUSTRIAL NETWORK COMPANY 105TX-POE SPECIFICATIONS BENEFITS Case Dimensions Height: Width: Depth: Weight: DIN-Rail: PoE Industrial Network Switch • Compact Size / Small Footprint • Ability to Power Devices via LAN • Eliminates need for Costly Electrical Wiring • Extended Environmental Specifications • Hardened Metal DIN-Rail Enclosure • High Performance • High MTBF >2M Hours • ESD Protection Diodes on RJ-45 Ports • Surge Protection Diodes on Power Inputs 3.5" 1.5" 3.6" 0.7 lbs. 35mm Electrical Input Voltage: Steady Input Current Under Full Load: Steady Input Current with No PoE, Switch Full Load: Inrush: Environmental Operating Temperature: Storage Temperature: Operating Humidity: (9.7cm) (3.8 cm) (9.0 cm) (0.3 kg) 46-49 VDC 1.6 A@48V 65mA@48V 26Amp/1.3ms@48V Operating Altitude: -40oC to 85oC -40oC to 85oC 10% to 95% (Non Condensing) 0 to 10,000 ft. Reliablity MTBF: >2 Million Hours Network Media 10BaseT: 100BaseTX: >Cat3 Cable >Cat5 Cable Connectors 10/100BaseTX+PoE: Four (4) RJ-45 TX/PoE Copper Ports One (1) RJ-45 TX Copper Port 10/100BaseTX: Recommended Wiring Clearance Front: 2" (5.08 cm) Top: 1" (2.54 cm) Ease of Use • Plug & Play Operation • Auto Sensing 10/100BaseTX • Auto Sensing Full/Half Duplex • MDIX Auto Cable Sensing • Unmanaged Operation • Auto Detection of Connected PoE Devices • Redundant Power Status LED's Increased Performance • Full Wire Speed Capable • Full Duplex Capable • Eliminates Network Collisions • Increases Network Determinism • Auto-Disconnect of PoE Port if Fault is Detected Regulatory Approvals FCC Title 47 Part 15 Class A; ICES-003- Class A CE: EN61000-6-2,4: EN61000-4-2,3,4,5,6 EN55011 UL Listed (US and Canada) per ANSI/ISA-12.12.01-2000, Class I, Div 2, Groups A,B,C,D,T4A; ABS Type Approval for Shipboard Applications DNV Type Approval Certification EN50155 for Railway Applications GOST-R Certified; RoHS Compliant Designed to comply with: IEEE 1613 for Electric Utility Substations and NEMA TS1/TS2 for Traffic Control Equipment Ordering Information 105TX-POE Five 10/100BaseTX Ports Four POE Ports Contact Information N-TRON Corp. N-TRON Europe GmbH 820 S. University Blvd., Suite 4E Alte Steinhauserstr 19 Mobile, AL 36609 USA 6330 Cham / Zg Switzerland TEL: (251) 342-2164 TEL: +41 41 7406636 FAX: (251) 342-6353 FAX: +41 41 7406637 Website: www.n-tron.com Email: N-TRON_info@n-tron.com REV 090805 ® 2009 N-TRON, Corp. N-TRON and the N-TRON logo are trademarks of N-TRON, Corp. Product names mentioned herein are for identification purposes only and may be trademarks and/or registered trademarks of their respective company. Specifications subject to change without notice. The responsibility for the use and application of N-TRON products rests with the end user. N-TRON makes no warranties as to the fitness or suitability of any N-TRON product for any specific application. N-TRON Corporation shall not be liable for any damage resulting from the installation, use, or misuse of this product. Printed in USA. THE INDUSTRIAL NETWORK COMPANY 105TX-POE Drawings on N-TRON Tech Docs Page ® 2009 N-TRON, Corp. N-TRON and the N-TRON logo are trademarks of N-TRON, Corp. Specifications subject to change without notice. Printed in USA.