708FX2-ST

THE INDUSTRIAL NETWORK COMPANY 708FX2 The N-TRON ® 708FX2 Industrial Ethernet Switch combines outstanding performance and ease of use. It is ideally suited for connecting Ethernet enabled industrial and/or security equipment and is a fully managed switch. PRODUCT FEATURES • • • • • • • • • • Six 10/100BaseTX RJ-45 Ports Two 100BaseFX Fiber ports, ST or SC style -40oC to 85oC Operating temperature ESD and Surge Protection Diodes on all Ports Auto Sensing 10/100BaseTX, Duplex, and MDIX Store-and-forward Technology Rugged DIN-Rail Enclosure Redundant Power Inputs (10-30 VDC) Configurable Alarm Contact Configurable Bi-Color Fault Status LED Fully Managed Features: • • • • • • • • • • • • • Full SNMP and Web Browser Management Detailed Ring Map and Fault Location Charting N-Ring™ Technology with ~30ms Healing N-View™ OPC Monitoring Plug-and-play IGMP Support 802.1Q tag VLAN and Port VLAN 802.1p QoS and Port QoS EtherNet/IP™ CIP Messaging LLDP (Link Layer Discovery Protocol) Trunking Mirroring 802.1d, 802.1w, 802.1D RSTP DHCP Management Features The 708FX2 offers several management functions that can be easily configured using a web browser. IGMP Snooping - Internet Group Management Protocol is a feature that allows the 708FX2 switch to forward and filter multicast traffic intelligently. VLAN - Virtual Local Area Network allows you to segment the switch in order to create two or more separate local area network domains. QoS - Quality of Service provides prioritization of network traffic in order to provide better network service. The primary goal of QoS is to improve the latency of prioritized Ethernet packets required for ring management, real-time, and other interactive applications. Trunking - Trunking (link aggregation) enables multiple physical ports to be linked together and function as one uplink to another N-TRON trunking capable switch configured in the same manner, thereby increasing the bandwidth between switches. This configuration can provide increased bandwidth and redundancy to applications requiring high levels of fault tolerant operation. Port Mirroring - This function allows the traffic on one port to be duplicated and sent to a designated mirror port. Port mirroring can be used to monitor Ethernet traffic on the designated source port using the assigned mirror port. Rapid Spanning Tree This function allows the switch to be configured in a ring or mesh topology, and provides support for redundant path communications with high speed (rapid) healing. Remote Monitoring Options For ease of configuration and monitoring, the 708FX2 offers web browser management and N-View OLE for Process Control (OPC) server software. The N-TRON N-View software can be combined with popular HMI software packages to add network traffic monitoring, trending, and alarming to any application u s i n g N -T R O N s w i t c h e s . I n a d d i t i o n S N M P i s available for switch link and status monitoring. The Alarm Contact and Status LED can be configured to respond to power failure on power input 1 or input 2, N-Ring Broken, Partial Break High, Partial Break Low, or if multiple ring managers are detected. N-Ring Technology N-TRON 's 708FX2 ring manager using N-TRON's N-Ring technology offers expanded ring size capacity, detailed fault diagnostics, and a standard healing time of ~30ms. The 708FX2 ring manager periodically checks the health of the ring via packets. If the ring manager stops receiving these health check packets, it converts the Ring to a linear bus topology within ~30ms. When all switches in the ring are N-TRON fully managed switches, a detailed ring map and fault location chart will also be provided on the ring manager’s web browser and OPC server to identfy the health status of the ring. N-Link allows the linking of two N-Rings. Up to 250 fully managed N-TRON switches can participate in N-Ring topologies. Industrial Packaging and Specifications The 708FX2 is designed to operate in industrial environments. It is housed in a rugged steel DIN-Rail enclosure. It has extended industrial specifications and features to meet or exceed the operating parameters of the connected equipment. These include extended temperature ratings, extended shock and vibrations specs, redundant power inputs, and high MTBF (greater than 2M hours). Ease of Use The 10/100BaseTX ports are auto sensing and auto configuring. Each copper port is automatically negotiated for maximum speed and performance by default, but can also be hard coded using the user interface. A high speed processor allows wire speed capability on all 100BaseTX ports simultaneously. THE INDUSTRIAL NETWORK COMPANY 708FX2 Industrial Ethernet Switch Ordering Information 708FX2-XX 708FXE2-XX-YY 700-PM NTPS-24-1.3 URMK Six 10/100BaseTX Ports, Two Multimode 100BaseFX Fiber Optic Ports Six 10/100BaseTX Ports, Two Singlemode 100BaseFX Fiber Optic Ports Panel Mount Kit N-TRON Power Supply - (1.3 Amp @ 24VDC) 19" Universal Rack Mount Kit Where: XX = ST or SC, YY = 15, 40 or 80 for Singlemode, Blank for Multimode E = Singlemode, and Blank Otherwise 708FX2 Specifications Switch Properties Number of MAC Addresses: Aging Time: Latency Typical: Switching Method: 8000 Programmable 2.9 μs Store-and-Forward 100 Mb Fiber Transceiver Characteristics Fiber Length TX Power Min RX Sensitivity Max Wavelength Physical Height: Width: Depth: Weight (max): DIN-Rail Mount: Electrical Redundant Input Voltage: Input Current (max): N-TRON Power Supply: Environmental Operating Temperature: Storage Temperature: Operating Humidity: Operating Altitude: 2.3" 6." 3.8" 1.65 lbs 35mm (5.8cm) (15.3cm) (9.6cm) (0.75kg) 10-30 VDC 330mA max @24VDC NTPS-24-1.3 (1.3 A @24V) -40oC to 85oC -40oC to 85oC 5% to 95% (Non Condensing) 0 to 10,000 ft. Shock and Vibration (bulkhead mounted) Shock: 200g @ 10ms Vibration/Seismic: 50g, 5-200Hz, Triaxial Reliability MTBF: Network Media 10BaseT: 100BaseTX: 100BaseFX Multimode: 100BaseFXE Singlemode: >2 Million Hours 2km* -19dBm -32dBm 1310nm 15km** -15dBm -29dBm 1310nm 40km** -5dBm -34dBm 1310nm 80km** -5dBm -34dBm 1550nm * Multimode Fiber Optic Cable ** Singlemode Fiber Optic Cable Connectors 10/100BaseTX: Six (6) RJ-45 Copper Ports 100BaseFX: Two (2) SC or ST Fiber Duplex Ports Recommended Wiring Clearance Front: Side: 4" 1" (10.16cm) (2.54cm) Regulatory Approvals FCC/CE (CFR 47, Part 15, Subpart B, Class A) EN 55011 ICES-003- Class A EN61000-4-2/3/4/5/6/8/11, EN61000-6-2/4 UL /cUL: Class I, Div 2, Groups A, B, C, D and T4A ANSI/ISA 12.12.01-2007 ATEX II 3 G Ex nC (DEMKO 03 ATEX 0316686U) ABS Type Approval for Shipboard Applications DNV Type Approval Certification EN50155 for Railway Applications GOST-R Certified RoHS Compliant Designed to comply with: IEEE 1613 for Electric Utility Substations NEMA TS1/TS2 for Traffic Control Contact Information >Cat3 Cable >Cat5 Cable 50-62.5/125μm 7-10/125μm N-TRON Corp. N-TRON Europe GmbH 820 S. University Blvd., Suite 4E Alte Steinhauserstr 19 Mobile, AL 36609 USA 6330 Cham / Zg Switzerland TEL: (251) 342-2164 TEL: +41 41 7406636 FAX: (251) 342-6353 FAX: +41 41 7406637 Website: www.n-tron.com Email: N-TRON_info@n-tron.com REV 090805 ® 2009 N-TRON, Corp. N-TRON and the N-TRON logo are trademarks of N-TRON, Corp. Product names mentioned herein are for identification purposes only and may be trademarks and/or registered trademarks of their respective company. Specifications subject to change without notice. The responsibility for the use and application of N-TRON products rests with the end user. N-TRON makes no warranties as to the fitness or suitability of any N-TRON product for any specific application. N-TRON Corporation shall not be liable for any damage resulting from the installation, use, or misuse of this product. Printed in USA. THE INDUSTRIAL NETWORK COMPANY 708FX2 Drawings on N-TRON Tech Docs Page ® 2009 N-TRON, Corp. N-TRON and the N-TRON logo are trademarks of N-TRON, Corp. Specifications subject to change without notice. Printed in USA.