G057QN01 V2
■ Preliminary Specification
□ Final Specification
Module
5.7 Inch Color TFT-LCD
Model Name
G057QN01 V2
Date
Approved by
Date
Debbie Chiu
2011/3/31
O
nl
y
/2
01
Prepared by
1/
Checked &
Approved by
5/
27
Customer
2011/3/31
General Display Business Division / AU Optronics
corporation
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
Note: This Specification is subject to change
without notice.
In
te
rn
al
U
se
Daniel PY Tsai
G057QN01 V2 Ver. 0.2
3/31/11
G057QN01 V2
Contents
1. Operating Precautions .................................................................................... 4
2. General Description ........................................................................................ 5
2.1 Display Characteristics .......................................................................................................... 5
2.2 Optical Characteristics........................................................................................................... 6
3. Functional Block Diagram .............................................................................. 8
4. Absolute Maximum Ratings............................................................................ 9
4.1 Absolute Ratings.................................................................................................................... 9
4.2 Absolute Ratings of Environment .......................................................................................... 9
5. Electrical Characteristics.............................................................................. 10
5.1 TFT-LCD Driving .................................................................................................................. 10
5.2 Backlight Unit Driving........................................................................................................... 11
6. Signal Characteristic..................................................................................... 12
1/
5/
27
6.1 Pixel Format Image.............................................................................................................. 12
6.2 Scanning Direction............................................................................................................... 12
6.3 The Input Data Format......................................................................................................... 13
6.4 TFT- LCD Interface Signal Description................................................................................ 14
6.5 TFT- LCD Interface Timing................................................................................................... 15
6.6 LED Backlight Unit Interface Signal Description................................................................. 16
01
6.7 Power ON/OFF Sequence................................................................................................... 16
/2
7. Connector & Pin Assignment ....................................................................... 17
U
se
O
nl
y
7.1 TFT- LCD Signal (CN1): LCD Connector............................................................................ 17
7.2 LED Backlight Unit (CN2): Backlight Connector................................................................. 17
7.3 PIN 1 definition of CN1 and CN2 ........................................................................................ 18
E
In
te
rn
al
8. Reliability Test Criteria ................................................................................. 18
9. Mechanical Characteristics .......................................................................... 20
10. Label and Packaging................................................................................... 21
M
AT
10.1 Shipping Label (on the rear side of TFT-LCD display) ..................................................... 21
10.2 Carton Package................................................................................................................. 21
PR
O
11 Safety ............................................................................................................ 22
AU
O
C
on
f
id
e
nt
ia
lF
or
11.1 Keen Edge Requirements ................................................................................................. 22
11.2 Materials ............................................................................................................................. 22
11.3 Capacitors .......................................................................................................................... 22
11.4 National Test Lab Requirement ......................................................................................... 22
G057QN01 V2 Ver. 0.2
3/31/11
G057QN01 V2
Record of Revision
Version and Date Page
0.1,
March.28.2011
All
0.2,
March.31.2011
Old description
New Description
Remark
First edition preliminary specifications
Correct Mechanical Characteristics
Diagram
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
01
1/
5/
27
20
G057QN01 V2 Ver. 0.2
3/31/11
G057QN01 V2
1. Operating Precautions
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
01
1/
5/
27
1) Display area (Polarizer) of TFT-LCD Module is easily to be damaged, please be cautious and not
to scratch it.
2) Be sure to power off your machine before connecting or disconnecting your signal cable to
TFT-LCD Module.
3) Wipe off water drop on display area immediately. Long contact with water may cause
discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Display area (Glass) of TFT-LCD Module may be broken or cracked if bump Module against hard
object.
6) To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling
TFT-LCD Module.
7) Do not open nor modify the TFT-LCD module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if TFT-LCD module has to be put back into the packing container slot after it was taken
out from the container, do not press the center of the LED Reflector edge. Instead, press at the
far ends of the LED Reflector edge softly. Otherwise the TFT-LCD Module may be damaged.
10) When inserting or removing of your signal cable to TFT-LCD Module, be sure not to apply
abnormal force (rotate, tilt…etc.) to the Connector of the TFT-LCD Module.
11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very
short time. Please design your display product well to avoid external force applying to module by
end-user directly.
12) Small amount of materials without flammability grade are used in the TFT-LCD module. The
TFT-LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13) Severe temperature condition may result in different luminance, response time.
14) Continuous operating TFT-LCD Module under high temperature environment may accelerate
LED light bar exhaustion and reduce luminance dramatically.
15) The data on this specification sheet is applicable when TFT-LCD module is placed in landscape
position.
16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use screen
saver or moving content periodically if fixed pattern is displayed on the screen.
G057QN01 V2 Ver. 0.2
3/31/11
G057QN01 V2
2. General Description
G057QN01 V2 is designed for industrial display applications with QVGA (320 x RGB x 240) resolution
and 262k colors (RGB 6-bits). It is composed of a TFT-LCD panel, driver ICs, control and power
supply circuits board and backlight unit including LED driver circuit. G057QN01 V2 offers CMOS
interface for display signal input.
2.1 Display Characteristics
The following items are G057QN01 V2 characteristics summary at 25
(Room Temperature).
Items
Unit
Specifications
Active Area
mm
115.2(H) x 86.4(V)
Screen Diagonal
inch
5.7
Pixels H x V
320 x 3(RGB) x 240
Pixel Pitch
mm
0.36 x 0.36
Pixel Arrangement
R.G.B. Vertical Stripe
Display Mode
TN, Normally White
Volt
3.3 typ.
Typical Power Consumption
Watt
3.37W (LCD:0.37W/LED BLU: 3W)
@ All black pattern, Full Load and VLED=12V
5/
1/
01
Grams
144.0(H)x 104.6(V) x 12.3(D) (typ.)
y
mm
nl
Physical Size
160g (typ.), 175g (max.)
/2
Weight
27
Nominal Input Voltage VDD
CMOS 6-bit Parallel RGB
Surface Treatment
Anti-Glare, Hardness 3H
U
se
O
Electrical Interface
In
te
rn
al
Support Color
The most suitable view angle
12 o’clock
PR
O
M
AT
E
Temperature Range
Operating
Storage (Non-Operating)
262K colors
o
-30 to +85
-30 to +85
RoHS Compliance
AU
O
C
on
f
id
e
nt
ia
lF
or
RoHS Compliance
C
C
o
G057QN01 V2 Ver. 0.2
3/31/11
vengdistac
1with50cm
G057QN01 V2
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25
Uniformity
%
Contrast Ratio
msec
Response Time
msec
msec
Viewing Angle
Rising
1.3
500
800
15
-
20
Note 4
-
10
15
Note 5
-
Falling
Rising + Falling
25
35
70
80
-
Horizontal
CR = 10
(Right)
(Left)
70
degree
degree
Vertical
CR = 10
(Upper)
(Lower)
60
80
Red x
Red y
Green x
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
/2
TBD
TBD
nl
y
TBD
O
se
-
TBD
TBD
50
Note
1, 2, 3
Note 6
TBD
TBD
TBD
TBD
-
rn
al
U
%
TBD
TBD
Note 1
-
TBD
TBD
Green y
-
70
TBD
Remark
-
70
60
White x
-
-
degree
degree
Blue y
Note 1: Measurement method
Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent)
M
< 1 lux
or
Environment
Center
PR
O
Test Point
AT
E
Aperture
In
te
Equipment
-
800
5 Points
Blue x
Color Gamut
Max.
600
White y
Color / Chromaticity
Coordinates
(CIE 1931)
Typ.
27
cd/m2
Min.
5/
White Luminance
Conditions
VLED =12V, DPWM =100%
(center point)
1/
Unit
01
Item
(Room Temperature).
ia
lF
LCD Module
nt
equivalent
id
e
on
f
C
O
AU
SR_3 or
measuring distance
Module Driving Equipment
G057QN01 V2 Ver. 0.2
3/31/11
G057QN01 V2
Note 2: Definition of 5 points position (Display active area: 115.2mm(W) x 86.4mm(H))
W
W /4
W /4
W /4
W /4
H /4
1
2
H /4
3
H
H /4
4
5
H /4
Note 3:
The luminance uniformity of 5 points is defined by dividing the maximum luminance value by the minimum luminance value
at full white condition.
5/
1/
Minimum Brightness of five points
27
Maximum Brightness of five points
δW5 =
/2
01
Note 4: Definition of contrast ratio (CR):
y
Brightness @ “White” state
nl
Contrast ratio (CR) =
U
se
O
Brightness @ “Black” state
rn
al
Note 5: Definition of response time:
In
te
The output signals of photo detector are measured when the input signals are changed from “White” to “Black” (falling time)
E
and from “Black” to “White” (rising time), respectively. The response time interval definition is between 10% and 90% of
PR
O
M
AT
amplitude. Please refer to the figure as below.
Tf
Tr
O
C
response
on
f
id
e
Optical
AU
ia
nt
100
90
lF
or
%
White
Black
White
10
0
G057QN01 V2 Ver. 0.2
3/31/11
Viewngalsthm
eurntofcasri#
G057QN01 V2
Note 6: Definition of viewing angle
10, at the screen center, over 180° horizontal and 180° vertical range.
The 180° horizontal (θL, θR) and 180° vertical (ΦH, ΦL) range are illustrated as following figure.
3. Functional Block Diagram
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
01
1/
5/
27
The following diagram shows the functional block of the G057QN01 V2 color TFT/LCD module.
G057QN01 V2 Ver. 0.2
3/31/11
Bulbshode39/anocdes3
G057QN01 V2
4. Absolute Maximum Ratings
4.1 Absolute Ratings
Symbo
Min
Max
Unit
Remark
Logic/LCD Drive Voltage
VDD
-0.3
+3.6
Volt
Ta= 25oC
LCD Input Signal Voltage
VIN
-0.3
+3.6
Volt
Ta= 25 C
LED BLU Drive Voltage
VLED
0
23
Volt
Ta= 25 C
VPWM
0
8
Volt
Ta= 25oC
Symbol
Min
Max
Unit
Remark
TOP
-30
+85
℃
Note 1, 2
TST
-30
+85
Item
LED Dimming Input Voltage
High
o
o
4.2 Absolute Ratings of Environment
Storage Temperature
Storage Humidity
HST
95
5
%RH
℃
95
%RH
Note 1, 2
tion.
Note 1
Note 1
01
Note 1: Maximum Wet-
5
27
HOP
5/
Operation Humidity
1/
Operating Temperature
/2
Item
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
Note 2: Only operation is guaranteed. Optical performance should be evaluated at 25 only.
G057QN01 V2 Ver. 0.2
3/31/11
G057QN01 V2
5. Electrical Characteristics
5.1 TFT-LCD Driving
5.1.1 Power Specification
Symbol
Parameter
Min
Typ
Max
Units
3.0
3.3
3.6
Volt
VDD
Logic/LCD Drive Voltage
IDD
VDD Current
-
115
130
mA
Irush
LCD Inrush Current
-
-
1.5
A
PDD
VDD Power
-
0.37
0.43
Watt
Allowable Logic/LCD Drive Ripple Voltage
-
-
100
mVp-p
Q3
AO6402
Q3
AO6402
S
VCC
(LCD Module Input)
U
VR1
1
R2
0.01uF/25V
rn
al
SW MAG-SPST
47K
In
te
2
C1
1uF/16V
VDD
se
C3
+12.0V
(VDD=3.3V, at 60Hz)
nl
G
All Black Pattern
/2
R2
1K
SW1
01
1/
G
D1
D2
D5
D6
(High to Low)
Control
Signal
(VDD=3.3V, at 60Hz)
F1
S
R1
47K
All Black Pattern
27
D6
D5
D2
D1
Note 1
5/
+3.3V
(VDD=3.3V, at 60Hz)
y
Note 1: Measurement condition:
All Black Pattern
O
VDDrp
Remark
1K
3.3V
90%
nt
ia
lF
or
PR
O
M
AT
E
C2
1uF/25V
10%
0.5ms
AU
O
C
on
f
id
e
0V
VDD rising time
G057QN01 V2 Ver. 0.2
3/31/11
(Ro
4
G057QN01 V2
5.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off.
Max.
Unit
High
VIH
0.7VDD
-
VDD
Volt
Low
VIL
0
-
0.3VDD
Volt
High
VIH
0.7VDD
-
VDD
Volt
Low
VIL
0
-
0.3VDD
Volt
5.2 Backlight Unit Driving
5.2.1 Parameter guideline for LED
Following characteristics are measured under stable condition at 25
Min
Input Voltage
9
ILED
Input Current
-
Inrush Current
-
PLED
Power Consumption
IrushLED
-
FPWM
Dimming Frequency
200
DPWM
Dimming duty cycle
1
Volt
A
Off Control Voltage
-
1.5
5.5
-
O
se
3.3
rn
al
In
te
A
Volt
Volt
30K
Hz
100
%
5.5
Volt
-
0.8
Volt
-
-
Hrs
Remark
VLED =12V, DPWM =100%
VLED =12V, DPWM =100%
VLED =12V, DPWM =100%
Note 1,2
Note 3, 4
Note 5, 6
E
50000
W
0.2
U
2
Operating Life
20
3.3
-
On Control Voltage
VLED On/Off
12
3
2.0
Dimming control Voltage Low
Units
0.25
Dimming control Voltage High
VPWM DIM
Max
27
VLED
Typ
5/
Parameter
1/
Symbol
Remarks
om Temperature).
01
Input Voltage for RL/UD
Typ.
/2
Display Signals
Min.
y
Logic Input Voltage for
Symbol
nl
Parameter
PR
O
M
(PWM High: ON and PWM Low: OFF)
AT
Note 1: PWM dimming function can be operated by PWM signal. PWM duty cycle can adjust white Luminance.
Note 2: PWM signal can not be floating and pull-down to ground when waiting.
On/Off)
must be turned on late than VLED and PWM Signal.
or
Note 3: Enable (VLED
ia
lF
Note 4: Enable (VLED On/Off) must be turned off early than VLED and PWM Signal.
nt
Note 5: If G057QN01 V2 module is driven by high current or at high ambient temperature & humidity condition. The
on
f
id
e
operating life will be reduced.
C
Note 6: Operating life means brightness goes down to 50% initial brightness. Minimum operating life time is estimated data.
AU
O
Note 7: See Section 6.6 for LED Backlight Unit Interface Signal Description
G057QN01 V2 Ver. 0.2
3/31/11
G057QN01 V2
6. Signal Characteristic
6.1 Pixel Format Image
01
1/
5/
27
Following figure shows the relationship between input signal and LCD pixel format.
/2
6.2 Scanning Direction
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
The following figures show the image seen from the front view. The arrow indicates the direction of scan.
Note 1: TFT-LCD interface signal description is shown in section 6.4.
G057QN01 V2 Ver. 0.2
3/31/11
G057QN01 V2
6.3 The Input Data Format
This product displays 262,144 colors in terms of the 64 grey levels on RGB respectively. The following table demonstrates
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
01
1/
5/
27
the display of input data.
G057QN01 V2 Ver. 0.2
3/31/11
G057QN01 V2
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
01
1/
5/
27
6.4 TFT- LCD Interface Signal Description
Note 1: “Low” stands for 0V. “High” stands for 3.3V. “NC” stands for ”No Connection”.
G057QN01 V2 Ver. 0.2
3/31/11
G057QN01 V2
6.5 TFT- LCD Interface Timing
6.5.1 Timing Characteristics
DE mode only
Signal
Symbol
Min.
Typ.
Max.
Unit
Remark
Clock frequency (DOTCLK)
1/ TCLOCK
6.2
6.4
12.1
MHz
Note1
Period
TH
406
408
560
Active
THD
TCLOCK
Note1
Blanking
THB
86
88
240
Period
TV
254
263
360
Active
TVD
TLINE
Note1
Blanking
TVB
Horizontal Section
Vertical Section
Note 1: Recommended frame rate is 60 Hz.
320
240
14
23
120
6.5.2 Input Timing Diagram
Input Timing Definition ( DE Mode)
5/
27
TCLOCK
/2
01
1/
DOTCLK
Pixel
3
Pixel
N-1
y
Pixel
2
nl
Pixel
1
O
Invaild
Data
Pixel
N
Invaild
Data
Pixel
1
DE
rn
al
U
se
Input
Data
THB
In
te
THD
M
AT
E
TH
PR
O
DE
TVB
TV
AU
O
C
on
f
id
e
nt
ia
lF
or
TVD
G057QN01 V2 Ver. 0.2
3/31/11
G057QN01 V2
6.6 LED Backlight Unit Interface Signal Description
Pin #
Symbol
Pin Description
2
VLED
12V input
1
VLED
3
GND
5
PWM DIM
4
12V input
Ground
GND
6
Ground
1~100% PWM dimming
LED On/Off
0V-Off; 3.3~5V/NC-On
Note 1: “NC” stands for ”No Connection
6.7 Power ON/OFF Sequence
VDD power, LCD interface signals and backlight on/off sequence are shown in the following chart. Signals from any system
In
te
rn
al
U
se
O
nl
y
/2
01
1/
5/
27
shall be Hi-Z state or low level when VDD is off.
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
Power ON/OFF sequence timing
ON/OFF sequence should be applied to avoid abnormal function in the display. Please make sure to turn off the power when
you plug the cable into the input connector or pull the cable out of the connector.
G057QN01 V2 Ver. 0.2
3/31/11
G057QN01 V2
7. Connector & Pin Assignment
7.1 TFT- LCD Signal (CN1): LCD Connector
Manufacturer
Starconn
089H33-000100-G2-R, compatible with
Connector Model Number
IMSA-9637S-33Y902 & ELCO 08-6210--033-340-800+
Pin#
Symbol
Pin#
Symbol
Pin#
Symbol
1
GND
12
GND
23
B3
NC
14
G1
25
B5
5
GND
16
G3
27
7
R1
6
15
R0
8
9
G2
17
G4
18
R2
R3
24
G5
26
GND
28
VDD
R/L
GND
30
32
B0
R4
21
B1
11
R5
22
B2
31
VDD
33
U/D
NC
GND
/2
10
DE
29
19
20
B4
27
NC
G0
5/
4
3
13
1/
DOTCLK
01
2
nl
O
se
JST
rn
al
U
Manufacturer
y
7.2 LED Backlight Unit (CN2): Backlight Connector
SM06B-SRKS-G-TB
In
te
Connector Model Number
E
compatible with JST SM06B-SRSS-TB (LS) (SN)
JST SHR-06V-BKHF-B or compatible
Symbol
Pin #
Symbol
1
VLED
4
GND
VLED
5
PWM DIM
GND
6
LED ON/OFF
lF
Pin #
or
PR
O
M
AT
Mating Connecter Model Number
nt
ia
2
AU
O
C
on
f
id
e
3
G057QN01 V2 Ver. 0.2
3/31/11
,h3ousHr
40:/9%
G057QN01 V2
7.3 PIN 1 definition of CN1 and CN2
1/
5/
27
(Rear side of TFT-LCD)
nl
y
/2
01
8. Reliability Test Criteria
Required Condition
-30℃,300 hours
AT
M
PR
O
85℃/1 Hr (min.), power on/off per 5 minutes, repeat 5 times
Hot Start Test
-30℃/1 Hr (min.), power on/off per 5 minutes, repeat 5 times
or
Cold Start Test
lF
Shock Test
(Non-Operating)
Note 2
Note 2
Note 2
50G,20ms,Half-sine wave, (±X, ±Y, ±Z)
Note 2
1.5G, 10~200~10Hz, Sine wave, 30mins/axis, 3 direction (X, Y, Z)
Note 2
ia
nt
id
e
on
f
C
O
Note 2
-20℃/30 min ,60℃/30 min ,100cycles
Thermal Shock Test
AU
Note 2
E
85
Low Temperature Storage
Note 2
In
te
-3
High Temperature Storage
Note 2
rn
al
85
Low Temperature Operation
Attitude Test
U
High Temperature Operation
ESD
Note 2
se
Temperature Humidity Bias
Vibration Test
(Non-Operating)
Remark
O
Items
Contact Discharge: ±8KV, 150pF(330Ω) 1sec, 8 points, 25 times/point
Air Discharge: ±15KV, 150pF(330Ω) 1sec, 8 points, 25 times/point
Operating: 14,000 ft, Ramp: 2000 ft/min, 8hrs
Non-operating: 40,000 ft, Ramp: 2000 ft/min, 24hrs
Note 1,2
Note 2
G057QN01 V2 Ver. 0.2
3/31/11
G057QN01 V2
Note1: According to EN61000-4-2 ESD class B criteria, some performance degradation is allowed. TFT-LCD module
Note2:
To inspect TFT-LCD module after reliability test, please store it at room temperature and room humidity for 24
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
01
1/
5/
27
hours at least in advance.
on
f
The reliability test is performed only to examine the TFT-LCD module capability.
C
Each test is done by new TFT-LCD module. Don’t use the same TFT-LCD module repeatedly for reliability test.
O
Water condensation is not allowed for each test items.
AU
is self-recoverable, no data lost and no hardware failures after test.
G057QN01 V2 Ver. 0.2
3/31/11
O
U
on
f
C
or
lF
ia
nt
id
e
M
PR
O
9. Mechanical
Characteristics
A
E
AT
rn
al
In
te
se
U
y
nl
O
3/31/11
G057QN01 V2 Ver. 0.2
27
5/
1/
01
/2
G057QN01 V2
G057QN01 V2
10. Label and Packaging
10.1 Shipping Label (on the rear side of TFT-LCD display)
10.2 Carton Package
Max. capacity: 60 pieces TFT-LCD module per carton
Max. weight: 12.95 kg per carton
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
01
1/
5/
27
Outside dimension of carton: 520(L)mm* 340(W)mm* 250(H)mm
G057QN01 V2 Ver. 0.2
3/31/11
G057QN01 V2
11 Safety
11.1 Keen Edge Requirements
There will be no keen edges or corners on the display assembly that could cause injury.
11.2 Materials
11.2.1 Toxicity
There will be no carcinogenic materials used anywhere in the TFT-LCD module. If toxic materials are used, they will be
reviewed and approved by the responsible AUO toxicologist.
11.2.2 Flammability
All components including electrical components that do not meet the flammability grade UL94-V1 in the TFT-LCD
Module will complete the flammability rating exception approval process.
The printed circuit board will be made from material rated 94-V1 or better. The actual UL flammability rating will be
27
printed on the printed circuit board.
5/
11.3 Capacitors
01
1/
If any polarized capacitors are used in the TFT-LCD module, provisions will be made to keep them from being inserted
nl
y
/2
backwards.
se
O
11.4 National Test Lab Requirement
U
The TFT-LCD Module will satisfy all requirements for compliance to UL 60950 (U.S.A. Information Technology
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
Equipment).
G057QN01 V2 Ver. 0.2
3/31/11
工商网监
湘ICP备2023018690号
