96LEDK-A104SV23NC1

Product Specification G104SN03 V5 AU OPTRONICS CORPORATION ( V) Preliminary Specifications ( ) Final Specifications Module 10.4 Inch Color TFT-LCD Model Name G104SN03 V5 Customer Date Approved by Date Checked & Approved by /2 01 1/ 5/ Prepared by 2011/04/25 10 Debbie Chiu 2011/04/25 General Display Business Division / AU Optronics corporation AU O C on f id e nt ia lF or PR O M AT E In te Note: This Specification is subject to change without notice. rn al U se O nl y ShengHsun Lin G104SN03 V5 rev.0.0 1/25 Product Specification G104SN03 V5 AU OPTRONICS CORPORATION Contents 1. Operating Precautions.....................................................................................4 2. General Description .........................................................................................5 2.1 Display Characteristics...........................................................................................................5 2.2 Optical Characteristics ...........................................................................................................6 3. Functional Block Diagram ...............................................................................9 4. Absolute Maximum Ratings ..........................................................................10 4.1 Absolute Ratings of TFT LCD Module .................................................................................10 4.2 Absolute Ratings of Environment ........................................................................................10 5. Electrical Characteristics ..............................................................................11 5.1 TFT LCD Module .................................................................................................................. 11 5.2 Backlight Unit........................................................................................................................13 6. Signal Characteristic .....................................................................................14 1/ 5/ 10 6.1 Pixel Format Image ..............................................................................................................14 6.2 Scanning Direction ...............................................................................................................14 6.3 Signal Description ................................................................................................................15 6.4 The Input Data Format .........................................................................................................16 6.5 Interface Timing ....................................................................................................................17 6.6 Power ON/OFF Sequence ...................................................................................................18 01 7. Connector & Pin Assignment ........................................................................19 se O nl y /2 7.1 TFT LCD Module: LVDS Connector.....................................................................................19 7.2 LED Backlight Unit (CN2): Driver Connector ......................................................................19 7.3 LED Backlight Unit (CN4): Light bar Connector..................................................................20 rn al U 8. Reliability Test Criteria ..................................................................................21 9. Mechanical Characteristics ...........................................................................22 E In te 9.1 LCM Outline Dimension (Front View) ..................................................................................22 9.2 LCM Outline Dimension (Rear View)...................................................................................23 AT 10. Label and Packaging....................................................................................24 PR O M 10.1 Shipping Label (on the rear side of TFT-LCD display) ......................................................24 10.2 Carton Package .................................................................................................................24 or 11 Safety.............................................................................................................25 AU O C on f id e nt ia lF 11.1 Sharp Edge Requirements.................................................................................................25 11.2 Materials .............................................................................................................................25 11.3 Capacitors...........................................................................................................................25 11.4 National Test Lab Requirement..........................................................................................25 G104SN03 V5 rev.0.0 2/25 Product Specification G104SN03 V5 AU OPTRONICS CORPORATION Record of Revision Version and Date All First draft specification New Description - O C on f id e nt ia lF or PR O M AT E In te rn al U se O nl y /2 01 1/ 5/ 10 April 25, 2011 Old description AU 0.0 Page G104SN03 V5 rev.0.0 3/25 Product Specification G104SN03 V5 AU OPTRONICS CORPORATION 1. Operating Precautions 10 5/ 1/ 01 /2 y nl O se U rn al In te E AT M PR O or lF ia nt 15) 16) id e 13) 14) on f 12) C 11) O 10) Since front polarizer is easily damaged, please be cautious and not to scratch it. Be sure to turn off power supply when inserting or disconnecting from input connector. Wipe off water drop immediately. Long contact with water may cause discoloration or spots. When the panel surface is soiled, wipe it with absorbent cotton or soft cloth. Since the panel is made of glass, it may be broken or cracked if dropped or bumped on hard surface. To avoid ESD (Electro Static Discharde) damage, be sure to ground yourself before handling TFT-LCD Module. Do not open nor modify the module assembly. Do not press the reflector sheet at the back of the module to any direction. In case if a module has to be put back into the packing container slot after it was taken out from the container, do not press the center of the LED light bar edge. Instead, press at the far ends of the LED light bar edge softly. Otherwise the TFT Module may be damaged. At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface Connector of the TFT Module. TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very short time. Please design your display product well to avoid external force applying to module by end-user directly. Small amount of materials having no flammability grade is used in the LCD module. The LCD module should be supplied by power complied with requirements of Limited Power Source (IEC60950 or UL1950), or be applied exemption. Severe temperature condition may result in different luminance, response time and lamp ignition voltage. Continuous operating TFT-LCD display under low temperature environment may accelerate lamp exhaustion and reduce luminance dramatically. The data on this specification sheet is applicable when LCD module is placed in landscape position. Continuous displaying fixed pattern may induce image sticking. It’s recommended to use screen saver or shuffle content periodically if fixed pattern is displayed on the screen. AU 1) 2) 3) 4) 5) 6) 7) 8) 9) G104SN03 V5 rev.0.0 4/25 Product Specification G104SN03 V5 AU OPTRONICS CORPORATION 2. General Description This specification applies to the Color Active Matrix Liquid Crystal Display G104SN03 V5 composed of a TFT-LCD display, a driver and power supply circuit, and a LED backlight system. The screen format is intended to support SVGA (800(H) x 600(V)) screen and 16.2M (RGB 8-bits) or 262k colors (RGB 6-bits). LED driving board for backlight unit is included in G104SN03 V5 and the LED unit is replaceable. All input signals are LVDS interface and compatible with G104SN03 V1. G104SN03 V5 designed with wide viewing angle; wide temperature and long life LED backlight (30k hrs) is well suited for industial applications. G104SN03 V5 is a RoHS product. 2.1 Display Characteristics The following items are characteristics summary on the table under 25 oC condition: Items Unit Specifications Active Area [mm] 211.2(H) x 158.4(V) Screen Diagonal [inch] 10.4 Pixels H x V 800x3(RGB) x 600 0.264 x 0.264 10 [mm] 5/ Pixel Pitch R.G.B. Vertical Stripe Display Mode TN, Normally White /2 01 1/ Pixel Arrangement [Volt] 3.3 (typ.) Typical Power Consumption [Watt] 2.5W(ILED=25mA) All black pattern Weight [Grams] 300g(typ.) Physical Size [mm] 236.0(H)x 176.9(V) x 5.7(D) (typ.) In te rn al U se O nl y Nominal Input Voltage VDD AT E Electrical Interface PR O 16.2M / 262K colors [oC] o [ C] -20 to +70 -20 to +70 RoHS Compliance AU O C on f id e nt ia lF Temperature Range Operating Storage (Non-Operating) or Support Color RoHS Compliance Anti-glare, Hardness 3H M Surface Treatment 1 channel LVDS G104SN03 V5 rev.0.0 5/25 1
ith50cm ingdstace w vew Product Specification G104SN03 V5 AU OPTRONICS CORPORATION 2.2 Optical Characteristics The optical characteristics are measured under stable conditions at 25 oC (Room Temperature): Item Unit Conditions Min. Typ. Max. ILED= 25mA 190 230 White Luminance [cd/m2] (center point) 5 points % [msec] [msec] Viewing Angle 25 30 - 10 20 - Rising + Falling - 35 - Horizontal CR = 10 (Right) (Left) 60 TBD [degree] [degree] Vertical CR = 10 (Upper) (Lower) 55 TBD - TBD TBD TBD TBD TBD 60 TBD 45 Red x TBD TBD Green x TBD TBD Green y TBD Blue x TBD TBD Blue y TBD 01 0.28 TBD /2 White y y 0.30 O nl % 0.31 0.33 50 2,3 4 5 - 6 - TBD TBD TBD TBD 0.34 0.36 - U se Note 1: Measurement method TBD 1 50 [degree] [degree] White x Color Gamut 500 - Red y Color / Chromaticity Coordinates (CIE 1931) 400 Falling [msec] - 10 Response Time Rising 75 5/ Contrast Ratio 65 1/ Uniformity Note < 1 lux PR O M Environment Center E Test Point AT Aperture In te rn al Equipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent) or LCD Module C on f id e nt ia lF equivalent Measuring distance Module Driving Equipment AU O SR_3 or G104SN03 V5 rev.0.0 6/25 Product Specification G104SN03 V5 AU OPTRONICS CORPORATION Note 2: Definition of 5 points position (Display active area: 211.2mm (H) x 158.4mm (V)) W W /4 W /4 W /4 W /4 H /4 1 2 H /4 3 H H /4 4 5 H /4 Note 3: The luminance uniformity of 5 points is defined by dividing the minimum luminance values by the maximum test point luminance Minimum Brightness of five points δW9 = Maximum Brightness of five points 5/ 10 Note 4: Definition of contrast ratio (CR): 1/ Brightness on the “White” state 01 Contrast ratio (CR)= /2 Brightness on the “Black” state se O nl y Note 5: Definition of response time: U The output signals of photo detector are measured when the input signals are changed from “White” to “Black” Tf AT M PR O 100 90 White lF or Optical Black White 10 0 AU O C on f id e nt ia response Tr E % In te 90% of amplitudes. Please refer to the figure as below. rn al (falling time) and from “Black” to “White” (rising time), respectively. The response time interval is between 10% and G104SN03 V5 rev.0.0 7/25 aurentofcrastio10,ahescrnte,ovra180°hoizntald180° ngleisthm Product Specification G104SN03 V5 AU OPTRONICS CORPORATION Note 6: Definition of viewing angle Viewing a vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as below: 90° (θ) horizontal left and right, and 90° (Φ) vertical high (up) and low (down). The measurement direction is typically perpendicular to the AU O C on f id e nt ia lF or PR O M AT E In te rn al U se O nl y /2 01 1/ 5/ 10 display surface with the screen rotated to its center to develop the desired measurement viewing angle. G104SN03 V5 rev.0.0 8/25 Product Specification G104SN03 V5 AU OPTRONICS CORPORATION 3. Functional Block Diagram The following diagram shows the functional block of the 10.4 inch color TFT/LCD module: Timing Controller Connecter 6/8 bits Sel DPS DC Power Panel Controller Gate Driver IC LVDS receiver LVDS 1ch DC/DC converter TFT-LCD 800x(3)x600 Pixels Source Driver IC RSDS Generate Gamma Voltage Light Bar AU O C on f id e nt ia lF or PR O M AT E In te rn al U se O nl y /2 01 1/ 5/ 10 DC Power G104SN03 V5 rev.0.0 9/25 Product Specification G104SN03 V5 AU OPTRONICS CORPORATION 4. Absolute Maximum Ratings 4.1 Absolute Ratings of TFT LCD Module Item Symbol Min Max Unit Logic/LCD drive Voltage Vin -0.3 +4.0 [Volt] 4.2 Absolute Ratings of Environment Item Symbol Min Max Unit Operation Humidity HOP 5 90 [%RH] Operating Temperature TOP Storage Temperature -20 TST Storage Humidity +70 -20 HST [oC] +70 5 Note: Maximum Wet-Bulb should be 39 C and no condensation. [ C] o [%RH] 90 AU O C on f id e nt ia lF or PR O M AT E In te rn al U se O nl y /2 01 1/ 5/ 10 o G104SN03 V5 rev.0.0 10/25 Product Specification G104SN03 V5 AU OPTRONICS CORPORATION 5. Electrical Characteristics 5.1 TFT LCD Module 5.1.1 Power Specification Symbol Parameter Min Typ Max Units 3.0 3.3 3.6 [Volt] VDD Logic/LCD Drive Voltage IDD VDD Current - 320 - [mA] Irush LCD Inrush Current - - 1.5 [A] PDD VDD Power - 1.06 - [Watt] - 100 [mV] p-p VDDrp Allowable Logic/LCD Drive Ripple Voltage - Remark All Black Pattern (VDD=3.3V, at 60Hz) Note 1 All Black Pattern (VDD=3.3V, at 60Hz) All Black Pattern (VDD=3.3V, at 60Hz) Note 1: Measurement condition: D6 D5 D2 D1 Q3 AO6402 1/ /2 y nl S 1K O 3.3V 90% ia nt 10% 0.47ms+ 10% VDD rising time AU O C on f id e 0V lF or PR O M AT E In te C2 1uF/25V se 0.01uF/25V 47K U VR1 R2 rn al 2 Q3 AO6402 G C3 1 01 D1 D2 D5 D6 R2 +12.0V SW MAG-SPST (LCD Module Input) 5/ C1 1uF/16V 1K SW1 VDD VCC G R1 47K (High to Low) Control Signal F1 S 10 +3.3V G104SN03 V5 rev.0.0 11/25 Product Specification G104SN03 V5 AU OPTRONICS CORPORATION 5.1.2 Signal Electrical Characteristics Input signals shall be low or Hi-Z state when VDD is off. Symbol Item Min. Typ. Max. Unit Remark VTH Differential Input High Threshold - - 100 [mV] VCM=1.2V VTL Differential Input Low Threshold 100 - - [mV] VCM=1.2V Input Differential Voltage 100 400 600 [mV] 1.125 1.25 1.375 [V] ｜VID｜ Differential Input Common Mode Voltage VICM VTH/VTL=+-100mV AU O C on f id e nt ia lF or PR O M AT E In te rn al U se O nl y /2 01 1/ 5/ 10 Note: LVDS Signal Waveform. G104SN03 V5 rev.0.0 12/25 Product Specification (R o ) G104SN03 V5 AU OPTRONICS CORPORATION 5.2 Backlight Unit 5.2.1 Parameter guideline for LED Following characteristics are measured under a stable condition using an inverter at 25 om Temperature): Symbol Parameter Min. Typ. Max. VCC Input Voltage 10.8 12 12.6 IVCC Input Current - 0.12 - PVCC Power Consumption - 1.44 - FPWM Dimming Frequency 200 - 10K Dimming Swing Voltage 3 3.3 5.5 Dimming duty cycle 5 - 100 % Dimming Voltage 0.6 3 [Volt] Dimming Range 30 100 % IF LED Forward Current - 25 - [mA] Ta = 25oC VF LED Forward Voltage - 26 29.2 [Volt] IF = 25mA, Ta = 25oC LED Power Consumption - 1.92 - 25,000 30,000 - [A] 100% Blightness [Watt] 100% Blightness [Volt] [Hz] PWM Dimming [Volt] [Watt] Analoge Dimming IF = 25mA, Ta = 25oC LED total Power Ta= 60oC RH