Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
17.0” SXGA Color TFT-LCD
Model Name
G170EG01 V1
Checked &
Approved by
1/
Date
Date
y
/2
01
Customer
5/
Module
10
( V ) Preliminary Specification
( ) Final Specification
2011/04/06
rn
al
U
se
O
nl
Debbie Chiu
Prepared by
Jimmy Tsai
2011/04/06
nt
ia
lF
or
PR
O
M
AT
E
In
te
Approved by
Desktop Display Business Group /
AU Optronics corporation
AU
O
C
on
f
id
e
Note: This Specification is subject to change without
notice.
document version 0.4
1/26
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
Contents
1. Handling Precautions .................................................................................................................. 4
2. General Description ..................................................................................................................... 5
2.1 Display Characteristics .......................................................................................................... 5
2.2 Optical Characteristics ........................................................................................................... 6
3. Functional Block Diagram.........................................................................................................10
4. Absolute Maximum Ratings......................................................................................................11
4.1 TFT LCD Module.................................................................................................................. 11
4.2 Backlight Unit ....................................................................................................................... 11
4.3 Absolute Ratings of Environment ........................................................................................ 11
5. Electrical characteristics ..........................................................................................................12
5.1 TFT LCD Module..................................................................................................................12
5.2 Backlight Unit .......................................................................................................................14
6. Signal Characteristic .................................................................................................................15
O
nl
y
/2
01
1/
5/
10
6.1 Pixel Format Image ..............................................................................................................15
6.2 The Input Data Format .........................................................................................................15
6.3 Signal Description ................................................................................................................16
6.4 Timing Characteristics..........................................................................................................18
6.5 Power ON/OFF Sequence...................................................................................................20
7. Connector & Pin Assignment ...................................................................................................22
In
te
rn
al
U
se
7.1 TFT LCD Module..................................................................................................................22
7.2 Backlight Unit .......................................................................................................................23
8. Reliability Test ............................................................................................................................24
9. Label and Packaging .................................................................................................................25
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
9.1 Shipping Label (on the rear side of TFT-LCD display)........................................................25
9.2 Carton Package ...................................................................................................................25
10. Mechanical Characteristics ....................................................................................................26
document version 0.4
2/26
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
Record of Revision
Version and Date
0.1 2011/01/12
Page
All
0.2 2011/01/14
5
Old description
First Edition for Customer
All
Remark
350
24
This module embbededs an LED
driver on it.
5/
This module does not contain an
inverter card for backlight.
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
11
Optical ResponseTime= 30 ms
1/
5
Optical ResponseTime= 5 ms
01
5, 6
Thickness= 18.0 mm
/2
0.4 2011/04/06
Thickness= 15.8 mm
y
26
10
11
nl
0.3 2011/01/24
New Description
document version 0.4
3/26
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
1. Handling Precautions
Since front polarizer is easily damaged, pay attention not to scratch it.
Be sure to turn off power supply when inserting or disconnecting from input connector.
Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
Since CMOS LSI is used in this module, take care of static electricity and insure human earth when
handling.
7) Do not open or modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a Module has to be put back into the packing container slot after once it was taken out
from the container, do not press the center of the LED light bar edge. Instead, press at the far ends
of the LED light bar edge softly. Otherwise the TFT Module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module even
momentary. At designing the enclosure, it should be taken into consideration that no
bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module
may be damaged.
12) Small amount of materials having no flammability grade is used in the LCD module. The LCD module
should be supplied by power complied with requirements of Limited Power Source (IEC60950 or
UL1950), or be applied exemption.
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
01
1/
5/
10
1)
2)
3)
4)
5)
6)
document version 0.4
4/26
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
2. General Description
This specification applies to the 17 inch Color TFT-LCD Module G170EG01 V1.
The display supports the SXGA+ (1280(H) x 1024(V)) screen format and 16.7M colors (RGB 6-bits+Hi-FRC
data).All input signals are 2 Channel LVDS interface compatible.
This module embbededs an LED driver on it.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25
[mm]
432 (17.0”)
[mm]
Pixels H x V
Pixel Pitch
337.920(H) × 270.336(V)
1280 × 3(RGB) × 1024
[mm]
Pixel Arrangement
Display Mode
0.264(per one triad) × 0.264
R.G.B. Vertical Stripe
Normally White
2
White Luminance
[cd/m ]
Optical ResponseTime
[msec]
Contrast Ratio
1000 : 1 (Typ)
30 (Typ)
[Volt]
Power Consumption
(VDD line + LED line)
+5.0 (Typ)
22 W (Typ.)
(with LED driver, all black pattern)
01
Nominal Input Voltage VDD
350
/2
[Watt]
358.5(H) x 296.5(V) Typ. x 18.0(D) Max.
Dual Channel LVDS
U
Electrical Interface
nl
[mm]
O
Physical Size (H x V x D)
1800 Typ.
y
[Grams]
se
Weight
10
Active Area
Specifications
5/
Screen Diagonal
Unit
1/
Items
condition:
rn
al
Surface Treatment
In
te
Support Color
AT
M
16.7M colors (RGB 6-bits +Hi-FRC data)
-30 to +85
-30 to +85
RoHS Compliance
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
RoHS Compliance
o
[ C]
o
[ C]
E
Temperature Range
Operating
Storage (Non-Operating)
Anti-glare type, Hardness 3H
document version 0.4
5/26
Tepratu)
(Rom
Product Specification
AU OPTRONICS CORPORATION
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25
Unit
[degree]
(Right)
(Left)
Vertical
CR = 10
(Up)
(Down)
Horizon
CR = 5
(Right)
(Left)
Vertical
CR = 5
[%]
(Up)
(Down)
9 Points
85
85
75
75
85
85
-
-
15
-
30
40
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
TBD
White x
0.283
0.313
0.343
White y
0.299
0.329
0.359
280
350
-
4
600
1000
-
4
[%]
-
-
1.5
5
[dB]
-
-
-20
7
1/
/2
y
nl
O
se
U
AT
E
In
te
Blue y
rn
al
Blue x
M
PR
O
[cd/m2 ]
or
lF
75
75
1
10
Green y
ia
-
-
Falling
Color / Chromaticity
Coordinates
(CIE 1931)
nt
80
80
25
Green x
2, 3
4, 6
on
f
id
e
70
70
20
Red y
Flicker
-
-
Red x
Cross Talk (At 75Hz)
85
85
-
Rising + Falling
Contrast Ratio
70
70
AU
O
C
Optical Equipment: BM-5A, BM-7, PR880, or equivalent
document version 0.4
Note
80
[msec]
White Luminance
(At LED= 110mA)
Max.
75
Rising
Optical Response Time
Typ.
10
Luminance Uniformity
Horizontal
CR = 10
Min.
01
Viewing Angle
Conditions
:
5/
Item
G170EG01 V1
6/26
4
Viewngalsthem
aurntofcasri 10,thescrnt,overa180°hizontald
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
Note 1: Definition of viewing angle
180° vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as follows;
90° (θ) horizontal left and right and 90° (Φ) vertical, high (up) and low (down). The measurement direction is
typically perpendicular to the display surface with the screen rotated about its center to develop the desired
90 %
10 %
/2
50 %
10 %
50 %
90 %
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
Note 2: 9 points position
01
1/
5/
10
measurement viewing angle.
AU
O
C
on
f
id
e
Note 3: The luminance uniformity of 9 points is defined by dividing the maximum luminance values by the
minimum test point luminance
document version 0.4
δW9 =
Minimum Luminance of 9 points
Maximum Luminance of 9 points
7/26
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
Note 4: Measurement method
The LCD module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature
change during measuring. In order to stabilize the luminance, the measurement should be executed after
lighting Backlight for 30 minutes in a stable, windless and dark room.
Photo detector
Field=2°
10
50 cm
TFT-LCD Module
/2
01
1/
5/
LCD Panel
se
O
nl
y
Center of the screen
U
Note 5: Definition of Cross Talk (CT)
rn
al
CT = | YB – YA | / YA × 100 (%)
In
te
Where
AT
E
YA = Luminance of measured location without gray level 0 pattern (cd/m2)
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
YB = Luminance of measured location with gray level 0 pattern (cd/m2)
document version 0.4
8/26
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
Note 6: Definition of response time:
The output signals of photo detector are measured when the input signals are changed from “Full Black” to
“Full White” (rising time), and from “Full White” to “Full Black ”(falling time), respectively. The response time
is interval between the 10% and 90% of amplitudes. Please refer to the figure as below.
Tr F
%
Tr R
100
90
Optical
White
response
Black
White
10
0
RGB RGB
5/
10
Note 7: Subchecker Pattern
01
1/
Gray Level = L127
nl
O
rn
al
U
se
Gray Level = L0
RGB RGB
y
/2
RGB RGB
In
te
Method: Record dBV & DC value with (WESTAR)TRD-100
or
Time
id
e
nt
ia
lF
DC
AC
PR
O
M
AT
E
Amplitude
AC Level(at 30 Hz)
DC Level
AU
O
C
on
f
Flicker (dB) = 20 log
document version 0.4
9/26
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
3. Functional Block Diagram
The following diagram shows the functional block of the 17.0 inches Color TFT-LCD Module:
AU ASIC
Receiver
TFT-LCD
1280*(3)*1024
Pixels
Y-Driver IC
+ 5V
Timing
Controller
LVDS
Connector
LVDS
G1
RSDS
G1024
D1
D3840
35 LEDs
10
Gamma
Correction
y
LED Driver
rn
al
U
se
O
nl
DC POWER
/2
01
1/
5/
DC/DC
Converter
In
te
PCBA Connector:
3806K-F06Y-03R
Or Compatible
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
JAE FI-XB30SSL-HF15
Or Compatible
LED Driver Connector:
document version 0.4
10/26
(
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
4. Absolute Maximum Ratings
Absolute maximum ratings of the module is as following:
VIN
4.2 Backlight Unit
Item
LED Forward Current
Min
Max
Min
Max
-0.3
Symbol
6
-
IF
4.3 Absolute Ratings of Environment
Item
Operating Temperature
Operation Humidity
Storage Humidity
Note 1: With in Ta (25
120
[mA]
Conditions
Conditions
Max
Unit
HOP
8
90
[%RH]
90
[%RH]
TST
+85
-30
HST
[ C]
o
+85
8
Note 1,2
Unit
Min
-30
Conditions
[Volt]
Symbol
TOP
Storage Temperature
Unit
Note 1,2
[oC]
)
Note 2: Permanent damage to the device may occur if exceed maximum values
Note 3
10
Logic/LCD Drive Voltage
Symbol
5/
Item
1/
4.1 TFT LCD Module
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
01
Note 3: For quality performance, please refer to AUO IIS (Incoming Inspection Standard).
document version 0.4
11/26
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
5. Electrical characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Input power specifications are as follows:
Symble
Parameter
Min.
Typ.
Max.
Unit
4.5
5.0
5.5
[Volt]
Condition
VCC
Logic/LCD Drive
Voltage
ICC
Input Current
-
1.05
1.16
[A]
Vin=5V , All Black Pattern,
at 75Hz
IRush
Inrush Current
-
-
3.0
[A]
Note
PCC
VCCPower
-
5.25
5.8
[Watt]
VCCrp
Allowable Logic/LCD
Drive Ripple Voltage
-
-
200
[mV]
p-p
5/
1/
F1
S
nl
Q3
AO6402
0.01uF/25V
PR
O
1
47K
AT
VR1
M
SW MAG-SPST
E
C3
+12.0V
In
te
S
1K
rn
al
G
(LCD Module Input)
U
D1
D2
D5
D6
R2
C1
1uF/16V
VCC
se
O
G
R1
47K
2
01
Q3
AO6402
y
D6
D5
D2
D1
SW1
With panel loading
/2
+5.0V
(High to Low)
Control
Signal
Vin=5V , All Black Pattern,
at 75Hz
10
Note: Measurement conditions:
±10%
ia
lF
or
C2
1uF/25V
nt
id
e
on
f
C
AU
O
VDD rising time
document version 0.4
5.0V
90%
0V
10%
0.5ms
12/26
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
5.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when Vin is off
It is recommended to refer the specifications of SN75LVDS82DGG (Texas Instruments) in detail.
Each signal characteristics are as follows;
Symbol
VTH
Parameter
Differential Input High
Threshold
Differential Input Low
Threshold
VTL
│VID│
Input Differential Voltage
Differential Input Common
Mode Voltage
VICM
Min
Typ
Max
Units
-
-
+100
[mV]
-100
-
-
[mV]
100
400
+1.0
+1.2
600
[mV]
+1.5
[V]
Condition
VICM = 1.2V
Note
VICM = 1.2V
Note
Note
VTH/VTL = ±100MV
Note
Note: LVDS Signal Waveform
│VID│
01
1/
5/
10
V
T
H
se
O
nl
y
/2
VICM
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
VSS
document version 0.4
13/26
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
5.2 Backlight Unit
Parameter guideline LED
Following characteristics are measured under stable condition at 25℃ (Room Temperature)
Symbol
Parameter
Min.
Typ.
Max.
Unit
Remark
Input Voltage
10.8
12
12.6
Volt
ILED
Input Current
-
1.18
-
A
100% Dimming
PLED
Power Consumption
-
14.16
-
Watt
100% Dimming
Inrush Current
-
-
5.1
A
VLED rising time ~ 470us
PWM Dimming Frequency
200
-
20K
Hz
Swing Voltage High
4.5
5.0
5.5
Volt
Swing Voltage Low
-
-
0.8
Volt
DPWM
Dimming Duty Cycle
10
-
100
%
IF
LED Forward Current
-
110
-
mA
Ta = 25℃
On Control Voltage
3.0
3.3
5.5
Volt
Off Control Voltage
-
-
0.8
Volt
Note 3, 4
50000
-
-
Hrs
IINRUSH LED
FPWM
VPWM DIM
VLED ON/OFF
Note 1,2
Note 5, 6
1/
5/
Operating Life
10
VLED
01
Note 1: PWM dimming function can be operated by PWM signal. PWM duty cycle can adjust white Luminance.
/2
(PWM High: ON and PWM Low: OFF)
nl
must be turned on late than VLED and PWM Signal.
O
On/Off)
se
Note 3: Enable (VLED
y
Note 2: PWM signal can not be floating and pull-down to ground when waiting.
U
Note 4: Enable (VLED On/Off) must be turned off early than VLED and PWM Signal.
rn
al
Note 5: If G170EG01 V1 module is driven by high current or at high ambient temperature & humidity condition. The
In
te
operating life will be reduced.
E
Note 6: Operating life means brightness goes down to 50% initial brightness. Minimum operating life time is estimated
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
data.
document version 0.4
14/26
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
6. Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship of the input signals and LCD pixel format.
1
2
1279 1280
R G B R GB
R G B R G B
1024th Line R G B R G B
R G B R G B
1/
5/
10
1st Line
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
01
6.2 The Input Data Format
AU
O
C
on
f
Note1: Normally, DE, VS, HS on EVEN channel are not used.
Note2: Please follow PSWG.
Note3: 8-bit in
document version 0.4
15/26
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
6.3 Signal Description
The module using a pair of LVDS receiver SN75LVDS82(Texas Instruments) or compatible. LVDS is a
differential signal technology for LCD interface and high speed data transfer device. Transmitter shall be
SN75LVDS83(negative edge sampling) or compatible. The first LVDS port(RxOxxx) transmits odd pixels
while the second LVDS port(RxExxx) transmits even pixels.
18
19
20
21
22
23
24
25
26
27
28
29
30
Positive LVDS differential clock input (Odd clock)
RxO3-
Negative LVDS differential data input (Odd data)
Negative LVDS differential data input (Even data)
Positive LVDS differential data input (Even data)
Power Ground
Positive LVDS differential data input (Even data)
O
RxE1+
GND
Power Ground
RxE2-
Negative LVDS differential data input (Even data)
RxE2+
Positive LVDS differential data input (Even data)
RxEC-
Negative LVDS differential clock input (Even clock)
RxEC+
Positive LVDS differential clock input (Even clock)
RxE3-
Negative LVDS differential data input (Even data)
RxE3+
Positive LVDS differential data input (Even data)
GND
Power Ground
GND
Power Ground (For AUO test Aging+HVS mode )
NC
GND
VCC
VCC
y
Negative LVDS differential data input (Even data)
nl
RxE1-
/2
GND
01
RxE0+
5/
RxE0-
10
Positive LVDS differential data input (Odd data)
1/
RxO3+
se
17
RxOC+
U
16
Negative LVDS differential clock input (Odd clock)
rn
al
15
RxOC-
In
te
14
Power Ground
E
13
GND
AT
12
Positive LVDS differential data input (Odd data, H-Sync,V-Sync,DSPTMG)
M
11
RxO2+
PR
O
10
Negative LVDS differential data input (Odd data, H-Sync,V-Sync,DSPTMG)
or
9
RxO2-
lF
8
Positive LVDS differential data input (Odd data)
No contact
ia
7
RxO1+
nt
6
Negative LVDS differential data input (Odd data)
Positive LVDS differential data input (Odd data)
id
e
5
RxO1-
RxO0+
on
f
4
Negative LVDS differential data input (Odd data)
C
3
DESCRIPTION
RxO0-
VCC
O
2
SIGNAL NAME
AU
1
PIN #
document version 0.4
Power Ground
+5.0V Power Supply
+5.0V Power Supply
+5.0V Power Supply
16/26
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
Note1: Start from left side
Connector
30
1
O
nl
y
/2
01
1/
5/
10
VCC
RxOIN0-
se
Note2: Input signals of odd and even clock shall be the same timing.
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
Note3: Please follow PSWG.
document version 0.4
17/26
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
6.4 Timing Characteristics
6.4.1 Timing Characteristics
Basically, interface timings described here is not actual input timing of LCD module but output timing of
SN75LVDS82DGG (Texas Instruments) or equivalent.
Signal
Item
Symbol
Active
Tdisp(v)
1024
1024
Th
750
844
Period
Vertical
Section
Tv
Section
Tbp(v)+Tfp(v)+PWvs
Active
Tdisp(h)
Frame rate
Th
Th
640
640
Tclk
Tclk
14.81
18.52
25
ns
F
49
60
Freq
110
40
2048
204
1408
54
70
76
Th
Tclk
Tclk
MHz
Hz
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
01
1/
5/
10
Note : DE mode only
1024
2048
640
Frequency
10
Unit
1024
Tbp(h)+Tfp(h)+PWhs
Frame rate
1066
Max
42
Blanking
Period
Clock
Typ
1034
Blanking
Period
Horizontal
Min
document version 0.4
18/26
Th
E
AT
rn
al
In
te
N
Line
M
se
U
y
nl
O
10
5/
1/
01
/2
4
PR
O
Line
Invalid Data
or
3
lF
Line
ia
2
nt
Tv
Tdisp(v)
Line
id
e
PWvs
Tbp(v)
1
Invalid Data
Line
Pixel Pixel Pixel
M-3
M-1
M-5
Invalid Data
on
f
Tfp(v)
Invalid Data
Pixel Pixel
9
7
Pixel Pixel Pixel
M-2 M
M-4
Tclk
Pixel
5
Pixel Pixel Pixel
10
12
8
Tfp(h)
Pixel
3
Pixel
6
C
N
Line
PWhs
Tdisp(h)
Pixel
1
Pixel
4
Tbp(h)
Invalid Data
Pixel
2
Pixel
11
Invalid Data
O
Vsync
Hsync
DE
RGB Data
CLK
Hsync
DE
RGB Data
(Odd)
RGB Data
(Even)
AU
AU OPTRONICS CORPORATION
19/26
document version 0.4
G170EG01 V1
Product Specification
6.4.2 Timing Diagram
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
6.5 Power ON/OFF Sequence
VDD power and lamp on/off sequence is as follows. Interface signals are also shown in the chart. Signals
from any system shall be Hi-Z state or low level when VDD is off.
90%
10%
10%
T
T
Signal
T1 T1
90%
90%
10%
10%
90%
VLED
T1
90%
10%
10%
T
T
T
T
90%
Back light dimming
10%
10
T
5/
T
01
1/
90%
Back light
T
T1
/2
10%
y
VDD
90%
Value
0.5
200
0.5
PR
O
T4
AT
T3
E
30
M
T2
or
T5
lF
T6
[ms]
50
[ms]
-
10
[ms]
-
-
[ms]
-
-
0
-
-
[ms]
[ms]
-
10
110
-
-
[ms]
T11
0
16
50
[ms]
on
f
C
AU
T10
document version 0.4
-
-
[ms]
[ms]
T9
10
-
-
id
e
T8
10
Unit
40
10
10
Max.
O
nt
ia
T7
-
In
te
T1
Typ.
rn
al
Min.
U
Parameter
se
O
nl
Power Sequence Timing
-
[ms]
20/26
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
T12
-
1000
10
-
[ms]
-
[ms]
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
01
1/
5/
10
T13
-
document version 0.4
21/26
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
7. Connector & Pin Assignment
Physical interface is described as for the connector on module.These connectors are capable of
accommodating the following signals and will be following components.
7.1 TFT LCD Module
7.1.1 Connector
Connector Name / Designation
Interface Connector
Manufacturer
JAE or Compatible
Type Part Number
FI-XB30SSL-HF15 or Compatible
Mating Housing Part Number
JAE FI-X30HL or Compatible
7.1.2 Pin Assignment
11
RxOIN3+
15
RxEIN1-
RxEIN0+
23
RxEIN3+
RxECLKIN+
GND (AGMODE+HVS)
GND
VCC
RxECLKIN-
26
NC
30
10
RxEIN2-
RxEIN3-
28
5/
RxEIN1+
22
24
1/
GND
GND
VCC
VCC
AU
O
C
on
f
id
e
nt
ia
lF
29
20
PR
O
27
18
or
25
16
RxEIN0-
rn
al
RxEIN2+
21
14
GND
19
RxOIN3-
12
In
te
17
10
E
13
RxOCLKIN-
/2
RxOCLKIN+
AT
9
RxOIN2+
RxOIN1+
8
GND
M
7
6
4
y
RxOIN2-
RxOIN1-
RxOIN0+
nl
5
3
2
O
RxOIN0-
Signal Name
se
1
Pin#
01
Signal Name
U
Pin#
document version 0.4
22/26
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
7.2 Backlight Unit
Physical interface is described as for the connector on module. These connectors are capable of
accommodating the following signals and will be following components.
Connector Name / Designation
Lamp Connector
Manufacturer
E&T or compatible
Connector Model Number
3806K-F06Y-03R or compatible
Mating Connector Model Number
H208K-P06N-02B or compatible
7.2.1 Signal for Lamp connector
10
12V
GND
GND
5V-On / 0V-Off
PWM Dimming
nl
y
/2
01
VCC
GND
GND
Display on
Dimming
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
2
3
4
5
6
Signal Name
12V
5/
Symbol
VCC
1/
Pin#
1
document version 0.4
23/26
020*/*,3hours
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
8. Reliability Test
Environment test conditions are listed as following table.
Items
Temperature Humidity Bias (THB)
High Temperature Operation (HTO)
Required Condition
Ta= 5
Note
, 80%RH, 300hours
Ta= 85 , 300hours
Low Temperature Operation (LTO)
Ta= -3
Low Temperature Storage (LTS)
Ta= -3
Vibration Test
(Non-operation)
Acceleration: 1.5 G
Wave: Random
Frequency: 10 - 200 - 10 Hz
Sweep: 30 Minutes each Axis (X, Y, Z)
Shock Test
(Non-operation)
Acceleration: 50 G
Wave: Half-sine
Active Time: 20 ms
Direction: ±X, ±Y, ±Z (one time for each Axis)
Drop Test
Height: 60 cm, package test
-
30min, 100 cycles
On/10sec, Off/10sec, 30,000 cycles
1
01
1/
On/Off Test
30min, 6
10
Thermal Shock Test (TST)
Ta= 85
5/
High Temperature Storage (HTS)
/2
Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec,
8 points, 25 times/ point.
2
nl
y
ESD (ElectroStatic Discharge)
U
se
O
Air Discharge: ± 15KV, 150pF(330Ω ) 1sec
8 points, 25 times/ point.
Operation:10,000 ft
Non-Operation:30,000 ft
In
te
rn
al
Altitude Test
PR
O
M
AT
E
Note 1: The TFT-LCD module will not sustain damage after being subjected to 100 cycles of rapid
temperature change. A cycle of rapid temperature change consists of varying the temperature from
-20℃ to 60℃, and back again. Power is not applied during the test. After temperature cycling, the
unit is placed in normal room ambient for at least 4 hours before power on.
AU
O
C
on
f
id
e
nt
ia
lF
or
Note 2: According to EN61000-4-2 , ESD class B: Some performance degradation allowed. No data lost.
Self-recoverable. No hardware failures.
document version 0.4
24/26
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
9. Label and Packaging
9.1 Shipping Label (on the rear side of TFT-LCD display)
The shipping label format is shown as below.
G170EG01
V.1
9.2 Carton Package
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
01
1/
5/
10
Max capacity：8 TFT-LCD module per carton （8pcs.1 layers）
Max weight: TBD kg per carton
Outside dimension of carton:434(L)mm*278(W)mm*390(H)mm
document version 0.4
25/26
Product Specification
G170EG01 V1
AU OPTRONICS CORPORATION
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
01
1/
5/
10
10. Mechanical Characteristics
document version 0.4
26/26
