Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
■ Preliminary Specification
□ Final Specification
Module
21.5” Color TFT-LCD
Model Name
G215HVN01.0
Customer
Approved by
Date
Date
2011/11/03
Checked &
Approved by
O
nl
y
/2
01
1/
Prepared by
11
/1
4
Vito Huang
2011/11/03
In
te
rn
al
U
se
Jimmy Tsai
General Display Business Division / AU
Optronics corporation
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
Note: This Specification is subject to change
without notice.
document version 0.1
1
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
Contents
1. Operating Precautions..................................................................................... 4
2. General Description......................................................................................... 5
2.1 Display Characteristics .......................................................................................................... 5
2.2 Optical Characteristics ........................................................................................................... 6
3. Functional Block Diagram ............................................................................. 10
4. Absolute Maximum Ratings .......................................................................... 11
4.1 TFT LCD Module.................................................................................................................. 11
4.2 Backlight Unit ....................................................................................................................... 11
4.3 Absolute Ratings of Environment ........................................................................................ 11
5. Electrical Characteristics .............................................................................. 13
5.1 TFT LCD Module..................................................................................................................13
5.2 Backlight Unit .......................................................................................................................15
6. Signal Characteristic ..................................................................................... 16
/2
01
1/
11
/1
4
6.1 Pixel Format Image ..............................................................................................................16
6.2 Signal Description ................................................................................................................17
6.3 The Input Data Format .........................................................................................................18
6.4 Interface Timing....................................................................................................................19
6.5 Power ON/OFF Sequence...................................................................................................20
O
nl
y
7. Connector & Pin Assignment........................................................................ 21
U
se
7.1 TFT LCD Module: LVDS Connector ....................................................................................21
7.2 Backlight Unit: LED Connector ............................................................................................22
E
In
te
rn
al
8. Reliability Test ............................................................................................... 23
9. Mechanical Characteristics ........................................................................... 24
10. Label and Packaging ................................................................................... 26
PR
O
M
AT
10.1 Shipping Label (on the rear side of TFT-LCD display)......................................................26
10.2 Carton Package .................................................................................................................26
11. Safety............................................................................................................ 27
AU
O
C
on
f
id
e
nt
ia
lF
or
11.1 Sharp Edge Requirements ................................................................................................27
11.2 Materials .............................................................................................................................27
11.3 Capacitors ..........................................................................................................................27
11.4 National Test Lab Requirement .........................................................................................27
document version 0.1
2
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
Record of Revision
Page
All
Old description
New Description
First Edition
Remark
All
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
01
1/
11
/1
4
Version and
Date
0.1 2011/11/03
document version 0.1
3
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
1. Operating Precautions
1)
2)
3)
4)
5)
6)
7)
8)
9)
11
1/
y
nl
O
se
U
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
14)
rn
al
13)
In
te
12)
/2
01
11)
/1
4
10)
Since front polarizer is easily damaged, pay attention not to scratch it.
Be sure to turn off power supply when inserting or disconnecting from input connector.
Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
Since CMOS LSI is used in this module, take care of static electricity and insure human earth
when handling.
Do not open or modify the Module Assembly.
In case if a Module has to be put back into the packing container slot after once it was taken out
from the container, take it easily, or the TFT Module may be damaged.
At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT Module.
After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module
even momentary. At designing the enclosure, it should be taken into consideration that no
bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module
may be damaged.
Small amount of materials having no flammability grade is used in the LCD module. The LCD
module should be supplied by power complied with requirements of Limited Power Source
(IEC60950 or UL1950), or be applied exemption.
Severe temperature condition may result in different luminance, response time and LED life
time.
The data on this specification sheet is applicable when LCD module is placed in landscape
position.
Continuous displaying fixed pattern may induce image sticking. It is recommended to use
screen saver or shuffle content periodically if fixed pattern is displayed on the screen.
document version 0.1
4
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
2. General Description
This specification applies to the 21.5 inch-wide Color TFT-LCD Module G215HVN01.0. The
display supports the Full HD - 1920(H) x 1080(V) screen format and 16.7M colors (RGB 8-bits
data). All input signals are dual channel LVDS interface.
LED driver board is included. G215HVN01.0 is designed for industrial display applications.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25℃ condition:
Unit
[mm]
[mm]
[um]
Optical Response Time
[msec]
Contrast Ratio
Nominal Input Voltage VDD
16 ms (Typ., on/off)
+5.0 V
[Volt]
+12.0 V
Weight
[Grams]
[mm]
AT
Electrical Interface
PR
O
M
Support Color
Surface Treatment
on
f
lF
ia
id
e
Storage (Shipping)
nt
Operating
495.6(W) × 292.2(H) × 17.35(D) Max.
Dual channel LVDS
16.7M colors (RGB 8 bits)
Anti-Glare, 3H
or
Temperature Range
4
2300 (max.)
E
Physical Size
(with LED driver board, all white pattern)
rn
al
(VDD line + LED line)
VDD: 4.4 + LED: 22 = 26.4 (Typ.)
U
[Watt]
In
te
Power Consumption
o
[ C]
o
[ C]
0 to +50
-20 to +60
RoHS Compliance
TCO 5.1 Compliance
AU
O
C
5000 (Typ.)
[Volt]
Backlight Input Voltage
TCO Compliance
300 (Typ.)
/1
[cd/m ]
11
White Luminance ( Center )
RoHS Compliance
VA Mode, Normally Black
2
1/
Display Mode
R.G.B. Vertical Stripe
01
Pixel Arrangement
248.25 (per one triad) ×248.25
/2
Pixel Pitch
1920(x3) x 1080
y
Pixels H x V
476.64 (H) x 268.11 (V)
nl
Active Area
546.86(21.53”)
O
Screen Diagonal
SPECIFICATIONS
se
ITEMS
document version 0.1
5
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25℃:
Viewing Angle
Conditions
[degree]
Horizontal
(Right)
Vertical
(Up)
CR = 10
Response Time
3000
5000
Falling Time (TrF)
-
6
-
Crosstalk (in 60Hz)
[%]
12
16
19
7
0.384
Green y
0.573
Blue y
0.000
0.333
0.623
0.155
01
1/
11
0.105
/2
0.263
y
White y
se
U
0.279
240
75
0.048
0.313
0.329
300
80
Note
2
3
4
0.383
0.673
0.205
5
0.098
0.363
0.379
-
6
1.5
8
-
-20
7
9
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
dB
10
0.334
[%]
Flicker
-
0.284
rn
al
Luminance Uniformity
-
Green x
0.283
nl
[cd/m ]
-
0.689
O
Central Luminance
-
0.639
White x
2
-
0.589
Blue x
Color Coordinates (CIE) White
Max.
Red x
Red y
Coordinates (CIE)
178
Normal Direction
Raising + Falling
Color / Chromaticity
150
178
(Down)
Raising Time (TrR)
[msec]
Typ.
150
CR = 10
Contrast ratio
(Left)
Min.
4
Unit
/1
Item
document version 0.1
6
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
Note 1: Measurement method
Before measuring, the LCD module should be turn on 30 minutes at room temperature. In order to
stabilize the luminance, the measurement should be executed after lighting Backlight for 30
minutes in a stable, windless and dark room.
Photo detector
Measured distance
LCD Panel
TFT-LCD Module
01
1/
11
/1
4
Center of the screen
nl
y
/2
Note 2: Definition of viewing angle measured by ELDIM (EZContrast 88)
Viewing angle is the measurement of contrast ratio ≧10, at the screen center, over a 180°
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
horizontal and 180° vertical range (off-normal viewing angles). The 180° viewing angle range is
broken down as follows; 90° (θ) horizontal left and right and 90° (Φ) vertical, high (up) and low
(down). The measurement direction is typically perpendicular to the display surface with the screen
rotated about its center to develop the desired measurement viewing angle.
document version 0.1
7
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
Note 3: Contrast ratio is measured by TOPCON SR-3
Note 4: Definition of Response time measured by Westar TRD-100A
The output signals of photo detector are measured when the input signals are changed from “Full
Black” to “Full White” (rising time, TrR), and from “Full White” to “Full Black” (falling time, TrF),
respectively. The response time is interval between the 10% and 90% (1 frame at 60 Hz) of
amplitudes.
T rR
T rF
%
100
90
Optical
White
response
10
0
Black
Black
1 Frame
White
1 Frame
11
/1
4
TrR + TrF = 16 msec (typ.).
y
/2
01
1/
Note 5: Color chromaticity and coordinates (CIE) is measured by TOPCON SR-3
Note 6: Central luminance is measured by TOPCON SR-3
Note 7: Luminance uniformity of these 9 points is defined as below and measured by
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
TOPCON SR-3
document version 0.1
Uniformity =
Minimum Luminance in 9 points (1 - 9)
Maximum Luminance in 9 Points (1 - 9)
8
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
Note 8: Crosstalk is defined as below and measured by TOPCON SR-3
CT = | YB – YA | / YA × 100 (%)
Where
YA = Luminance of measured location without gray level 0 pattern (cd/m2)
YB = Luminance of measured location with gray level 0 pattern (cd/m2)
Note 9: Test Patern: Subchecker Pattern measured by TOPCON SR-3
/1
4
Gray Level = L127
11
R
GBRGB
01
1/
RGBRGB
U
AC
AT
E
In
te
Amplitude
rn
al
Method: Record dB value with TRD-100
se
O
nl
y
/2
Gray Level = L0
RGBRGB
or
PR
O
M
DC
AC Level(at 30 Hz)
DC Level
AU
O
C
on
f
id
e
nt
ia
lF
Flicker (dB) = 20 log
Time
document version 0.1
9
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
3. Functional Block Diagram
The following diagram shows the functional block of this model.
+ 12V
I/F + X-PCB
Gamma
Correction
G1
Controller
LED B/L
TFT-LCD
1920*(3)*1080
Pixels
01
1/
Connector
Y-Driver IC
Timing
LVDS
Receiver
X-Driver IC
D5760
4
+5V
D1
/1
AUO ASIC
11
DC/DC
Converter
LVDS
LED driver board
U
se
O
nl
y
/2
G1080
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
LVDS Connector: JAE (FI-XB30SRL-HF11) or equivalent.
LED Connector: Sin Sheng (MS24049HJ )or equivalent.
document version 0.1
10
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
4. Absolute Maximum Ratings
Max
Unit
Conditions
0
5.5
[Volt]
Note 1,2
Min
Max
Unit
Conditions
VDD
Voltage
4.2 Backlight Unit
Item
Symbol
LED Input Voltage
VLED
10.8
4.3 Absolute Ratings of Environment
Item
Symbol
Operating Temperature
Min.
TOP
Glass Surface
0
13.2
[Volt]
Note 1,2
Max.
Unit
Conditions
4
Min
Note 3
[ C]
Note 3, Note 4
+50
0
+65
Operation Humidity
HOP
5
90
Storage Humidity
HST
/2
+60
y
-20
nl
TST
5
90
O
Storage Temperature
se
Temperature (Operation)
01
TGS
[oC]
/1
Logic/LCD Drive
Symbol
11
Item
1/
4.1 TFT LCD Module
o
[%RH]
[ C]
o
[%RH]
Note 3
In
te
rn
al
U
Note 1: With in Ta (25℃)
Note 2: Permanent damage to the device may occur if exceeding maximum values
Note 3: For quality perfermance, please refer to AUO IIS(Incoming Inspection Standard).
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
1. 90% RH Max ( Ta ≦39℃)
2. Max wet-bulb temperature at 39℃ or less. ( Ta ≦39℃)
3. No condensation.
Note4: Function judge only.
document version 0.1
11
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
Storage Range
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
01
1/
11
/1
4
Operating Range
document version 0.1
12
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
5. Electrical Characteristics
5.1 TFT LCD Module
Voltage
Input Current
PDD
Inrush Current
VDDrp
Unit
Conditions
4.5
5.0
5.5
[Volt]
+/-10%
-
0.7
0.8
[A]
0.81
0.89
[A]
3.5
4.4
[Watt]
4.05
4.9
[Watt]
-
-
3
[A]
-
-
500
[mV] p-p
-
VDD Power
IRush
Max
Allowable Logic/LCD
Drive Ripple Voltage
VDD= 5.0V,All white
pattern, At 60Hz
VDD= 5.0V, All white
pattern At 75Hz,
VDD= 5.0V,All white
pattern, At 60Hz
VDD= 5.0V, All white
pattern At 75Hz,
Note 1
4
IDD
Typ
Pattern At 75Hz
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
Note 1: Measurement conditions:
The duration of rising time of power input is 470us.
VDD= 5.0V, All white
/1
Logic/LCD Drive
Min
11
VDD
Parameter
1/
Symbol
01
5.1.1 Power Specification
nt
id
e
on
f
C
O
AU
document version 0.1
VDD rising time
5.0V
90%
0V
10%
0.47 ms
13
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
5.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off. Please refer to specifications of
SN75LVDS82DGG (Texas Instruments) in detail.
Symbol
VTH
VTL
│VID│
VCM
Parameter
Differential Input High
Min
Typ
Max
Units
-
-
+100
[mV]
-100
-
-
[mV]
100
-
600
[mV]
+1.0
+1.2
+1.5
[V]
Threshold
Differential Input Low
Threshold
Input Differential
Voltage
Differential Input
Common Mode Voltage
Condition
VCM = 1.2V,
Note 1
VCM = 1.2V
Note 1
Note 1
VTH-VTL = 200MV (max)
Note 1
│VID│
U
se
O
nl
y
/2
01
1/
11
/1
4
Note 1: LVDS Signal Waveform
E
In
te
rn
al
VICM
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
VSS
document version 0.1
14
b
le
d
ita
2
5
(R
T
)
tu
sta
c
o
n
o
m
e
p
ra
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
5.2 Backlight Unit
5.2.1 LED Driver
Following characteristics are measured under
Min
Typ
Max
Unit
10.8
12
13.2
Volt
-
1.83
-
A
100% Dimming
-
22
-
Watt
100% Dimming
200
-
20k
Hz
0
3.3
3.6
Volt
10
-
100
%
Analog Dimming Voltage
-
N/A
-
LED Forward Current
-
80
TBD
mA
Ta = 25oC, Note1
50000
-
-
Hrs
Ta = 25 C, Note4
Symbol
Parameter
Vcc
Input Voltage
Ivcc
Input Current
PLED
Power Consumption
FPWM
PWM Dimming Frequency
Swing Voltage
Dimming Duty Cycle
Vanalog
IF
.
No Analog Dimming
o
4
Operating Life
Remark
11
/1
Note 1: Ta means ambient temperature.
1/
Note 2: If module is driven by high current or at high ambient temperature & humidity condition. The operating life will be
y
Note 3: LED light bar structure: ( 6 strings x 10pcs / string =60pcs LED)
/2
01
reduced.
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
Note 4: Operating life means brightness goes down to 50% initial brightness. Typical operating life time is estimated data.
document version 0.1
15
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
6. Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship of the input signals and LCD pixel format.
1
2
1919 1920
R G B R G B
R GB R G B
1080 Line
R G B R G B
R GB R G B
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
01
1/
11
/1
4
1st Line
document version 0.1
16
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
6.2 Signal Description
The module using a pair of LVDS receiver SN75LVDS82(Texas Instruments) or compatible. LVDS is a differential signal
technology for LCD interface and high speed data transfer device. Transmitter shall be SN75LVDS83(negative edge
sampling) or compatible. The first LVDS port(RxOxxx) transmits odd pixels while the second LVDS port(RxExxx) transmits
even pixels.
PIN # SIGNAL NAME
DESCRIPTION
1
RXinO0-
3
RXinO1-
Negative LVDS differential data input (Odd data)
RXinO2-
Negative LVDS differential data input (Odd data, H-Sync, V-Sync, DSPTMG)
GND
Power Ground
19
20
21
22
23
24
25
26
27
28
29
30
Power Ground
RXinE1+
Negative LVDS differential data input (Even data)
4
/1
11
1/
Positive LVDS differential data input (Even data)
se
O
nl
y
RXinE1-
/2
GND
01
Positive LVDS differential data input (Even data)
GND
Power Ground
RXinE2+
Positive LVDS differential data input (Even data)
RXinE2-
U
18
RXinE0+
Negative LVDS differential data input (Even data)
rn
al
17
Negative LVDS differential data input (Even data)
In
te
16
RXinE0-
RxECLKIN-
Negative LVDS differential clock input (Even clock)
E
15
Positive LVDS differential data input (Odd data)
Negative LVDS differential data input (Odd data)
RxECLKIN+
Positive LVDS differential clock input (Even clock)
RXinE3+
Positive LVDS differential data input (Even data)
AT
14
RXinO3+
RXinO3-
RXinE3-
Negative LVDS differential data input (Even data)
M
13
Positive LVDS differential clock input (Odd clock)
PR
O
12
RxOCLKIN+
GND
Power Ground
or
11
Negative LVDS differential clock input (Odd clock)
NC
No connection (for AUO test only. Do not connect)
lF
10
RxOCLKIN-
ia
9
Positive LVDS differential data input (Odd data, H-Sync, V-Sync, DSPTMG)
NC
No connection (for AUO test only. Do not connect)
nt
8
RXinO2+
id
e
7
Positive LVDS differential data input (Odd data)
NC
VDD
on
f
6
C
5
Positive LVDS differential data input (Odd data)
RXinO1+
VDD
O
4
RXinO0+
VDD
AU
2
Negative LVDS differential data input (Odd data)
document version 0.1
No connection (for AUO test only. Do not connect)
Power +5V
Power +5V
Power +5V
17
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
11
/1
4
6.3 The Input Data Format
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
01
1/
Note1: 8-bits signal input.
Note2: L:NS alike H:Thine alike
document version 0.1
18
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
6.4 Interface Timing
6.4.1 Timing Characteristics
Signal
Item
Symbol
Min
Typ
Max
Unit
Clock
Frequency
1/ TClock
40
72
83
MHz
Frame Rate
Frequency
1/Tv
75
Hz
Active
TVD
1080
1080
1080
T_line
Period
TH
1034
1060
2047
THB
74
Period
Vertical
Section
TV
Blanking
Horizontal
2047
40
960
THD
Blanking
Note: DE mode only.
60
1120
8
TVB
Active
Section
50
1088
967
960
960
100
Input Timing Definition ( DE Mode)
nl
y
/2
TCLOCK
01
1/
11
/1
4
6.4.2 Input Timing Diagram
1087
T_clock
Pixel
1
Pixel
2
Pixel
3
Pixel
N-1
rn
al
Invaild
Data
Pixel
N
Invaild
Data
Pixel
1
DE
E
In
te
Input
Data
U
se
O
DOTCLK
PR
O
M
AT
THB
TH
TVB
TVD
TV
AU
O
C
on
f
id
e
nt
ia
lF
or
DE
THD
document version 0.1
19
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
6.5 Power ON/OFF Sequence
VDD power and B/L on/off sequence is as below. Interface signals are also shown in the chart. Signals from any system
shall be Hi-Z state or low level when VDD is off.
10
T9
lF
or
T10
ia
T11
T12
01
/2
y
nl
--
[ms]
se
O
[ms]
10
--
--
[ms]
[ms]
[ms]
--
--
[ms]
--
--
10
[ms]
0
16
50
[ms]
1000
--
10
110
--
---
--
--
--
10
--
[ms]
[ms]
[ms]
[ms]
C
T13
--
50
M
T8
[ms]
0
PR
O
T7
Units
10
--
--
AT
10
--
Max.
rn
al
T5
0.5
--
In
te
200
T6
nt
40
T3
T4
id
e
30
0.5
T2
on
f
Typ.
E
T1
Min.
U
Parameter
Power ON/OFF sequence timing
Value
1/
11
/1
4
or Analog dimming
AU
O
The above on/off sequence should be applied to avoid abnormal function in the display. Please make sure to turn off the
power when you plug the cable into the input connector or pull the cable out of the connector.
document version 0.1
20
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
7. Connector & Pin Assignment
Physical interface is described as for the connector on module. These connectors are capable of accommodating the
following signals and will be following components.
7.1 TFT LCD Module: LVDS Connector
Connector Name / Designation
Interface Connector / Interface card
JAE or compatible
Manufacturer
JAE (FI-XB30SRL-HF11) or equivalent.
Type Part Number
2
17
19
21
23
25
27
14
16
GND
18
RxECLKIN+
22
RxEIN2+
20
RxEIN3+
24
NC
NC
VDD
RxEIN2-
RxECLKINRxEIN3-
GND
26
NC
28
VDD
30
4
RxEIN1+
y
RxEIN1-
GND
VDD
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
29
RxEIN0-
RxOIN3-
rn
al
15
12
RxEIN0+
RxOIN3+
In
te
13
RxOCLKIN-
10
E
11
8
RxOCLKIN+
AT
9
RxOIN2+
/1
GND
M
7
6
11
RxOIN2-
RxOIN1+
nl
5
4
1/
RxOIN1-
RxOIN0+
01
RxOIN0-
Signal Name
O
3
Pin#
se
1
Signal Name
U
Pin#
FI-X30HL (JAE) or compatible
/2
Mating Housing Part Number
document version 0.1
21
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
7.2 Backlight Unit: LED Connector
Connector Name / Designation
LED Connector
Manufacturer
Sin Sheng or compatible
Connector Model Number
MS24049HJ
Mating Model Number
P24049 or compatible
SIGNAL NAME
GND
GND
GND
BL_DIM_P
5
Back light dimming, 3.3V
BL_EN
6
---
NC
V12
Input voltage, 12V
7
V12
9
V12
Input voltage, 12V
Input voltage, 12V
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
8
Back light enable, 5V
4
4
Ground
/1
3
Ground
11
2
Ground
1/
1
DESCRIPTION
01
PIN #
document version 0.1
22
5
0
8
%
R
H
3
0
h
a
o
u
r
s
=
,0
T
6
2
/0
/
2
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
8. Reliability Test
Environment test conditions are listed as following table.
Items
Required Condition
Temperature Humidity Bias (THB)
High Temperature Operation (HTO)
Low Temperature Operation (LTO)
High Temperature Storage (HTS)
Note
Ta= -
Vibration Test
(Non-operation)
Acceleration: 1.5 Grms
Wave: Random
Frequency: 10 - 200 Hz
Duration: 30 Minutes each Axis (X, Y, Z)
Shock Test
(Non-operation)
Acceleration: 50 G
Wave: Half-sine
Active Time: 20 ms
Direction: ±X, ±Y, ±Z (one time for each Axis)
Drop Test
Height: 46 cm, package test
On/Off Test
On/10sec, Off/10sec, 30,000 cycles
/1
11
30min, 6
30min, 100 cycles
1/
-
1
01
Thermal Shock Test (TST)
4
Low Temperature Storage (LTS)
y
/2
Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec,
15 points, 25 times/ point.
O
nl
ESD (Electro Static Discharge)
2
U
se
Air Discharge: ± 15KV, 150pF(330Ω ) 1sec
15 points, 25 times/ point.
rn
al
Operation:10,000 ft
Non-Operation:30,000 ft
In
te
Altitude Test
PR
O
M
AT
E
Note 1: The TFT-LCD module will not sustain damage after being subjected to 100 cycles of rapid temperature change.
A cycle of rapid temperature change consists of varying the temperature from -20℃ to 60℃, and back again. Power is
not applied during the test. After temperature cycling, the unit is placed in normal room ambient for at least 4 hours before
power on.
or
Note2: According to EN61000-4-2, ESD class B: Some performance degradation allowed. No data lost Self-recoverable.
AU
O
C
on
f
id
e
nt
ia
lF
No hardware failures.
document version 0.1
23
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
01
1/
11
/1
4
9. Mechanical Characteristics
document version 0.1
24
Product Specification
G215HVN01.0
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
01
1/
11
/1
4
AU OPTRONICS CORPORATION
document version 0.1
25
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
10. Label and Packaging
10.1 Shipping Label (on the rear side of TFT-LCD display)
G215HVN01.0
10.2 Carton Package
Max capacity: 21.5” TFT-LCD module per carton ( 9 pcs * 1 layers)
Max weight: 20.3 kg per carton
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
nl
y
/2
01
1/
11
/1
4
Outside dimension of carton: 564 mm x 273mmx 373 mm
document version 0.1
26
Product Specification
G215HVN01.0
AU OPTRONICS CORPORATION
11. Safety
11.1 Sharp Edge Requirements
There will be no sharp edges or comers on the display assembly that could cause injury.
11.2 Materials
11.2.1 Toxicity
There will be no carcinogenic materials used anywhere in the display module. If toxic materials are used,
they will be reviewed and approved by the responsible AUO toxicologist.
11.2.2 Flammability
All components including electrical components that do not meet the flammability grade UL94-V1 in the
module will complete the flammability rating exception approval process.
The printed circuit board will be made from material rated 94-V1 or better. The actual UL flammability
rating will be printed on the printed circuit board.
11.3 Capacitors
4
If any polarized capacitors are used in the display assembly, provisions will be made to keep them from
1/
11
/1
being inserted backwards.
y
nl
The display module will satisfy all requirements for compliance to:
/2
01
11.4 National Test Lab Requirement
U.S.A. Information Technology Equipment
AU
O
C
on
f
id
e
nt
ia
lF
or
PR
O
M
AT
E
In
te
rn
al
U
se
O
UL 1950, First Edition
document version 0.1
27
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Advantech:
96LEDK-A215FH30NF1
工商网监
湘ICP备2023018690号
