ADAM-3016-AE

ADAM-3016 ADAM-3017 Isolated Strain Gauge Input Module External Powered IEPE Signal Conditioner ADAM-3016 ADAM-3017 Specifications RoHS COMPLIANT 2002/95/EC Specifications I/O Integrated Electronic Piezoelectric (IEPE)Excitation ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ Channels 1 ƒƒ Upper Cut-Off Frequency (for all couple settings) x1, x10 gain (-5%) 100 kHz x100 gain (-1%) 50 kHz ƒƒ Lower Cut-Off Frequency (-3dB, 1 MΩ load, for all gain settings) DC Couple DC AC Couple (1 μF) 0.58 Hz AC Couple (47 μF) 0.012 Hz ƒƒ Accuracy < ±2% for all gain settings ƒƒ Compliance > 24 V ƒƒ Current 0, 4, 6, or 10 mA ± 5% ƒƒ Discharge Time Constant (1 MΩ load, for all gain settings) DC Couple 0 second AC Couple (1 μF) > 0.3 seconds AC Couple (47 μF) > 13 seconds ƒƒ DC Offset < 30 mV Accuracy Bandwidth Isolation Mode Rejection Current Output ±0.1% of full range 2.4 kHz (typical) >100 dB @ 50 Hz/60 Hz Current: 0 ~ 20 mA Current load resistor: 0 ~ 500 Ω (Source) ƒƒ Stability (Temperature Drift) 150 ppm (typical) ƒƒ Voltage Specifications Electrical input: ±10 mV, ±20 mV, ±30 mV, ±100 mV Excitation voltage: 1 ~ 10 VDC (60 mA max) ƒƒ Voltage Output Bipolar: ±5 V, ±10 V Unipolar: 0 ~ 10 V Impedance: < 50 Ω General ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ Connectors Enclosure Indicators Isolation Power Consumption ƒƒ ƒƒ ƒƒ ƒƒ Power Input Dimensions (W x H x D) Operating Temperature Storage Temperature Screw terminal ABS Power LED indicator 1,000 VDC (Three-way) ≤ 1.85 W (voltage output) ≤ 2.15 W (current output) 24 VDC ±10% 23.2 x 101 x 93.5 mm (0.91" x 3.97" x 3.68") -10 ~ 70 °C (14 ~ 158 °F) -25 ~ 85 °C (-13 ~ 185 °F) Ordering Information ƒƒ ADAM-3016 Isolated strain gauge input module Isolation Protection ƒƒ Input/Output to Power 1,000 VDC General ƒƒ I/O Connectors ƒƒ ƒƒ ƒƒ ƒƒ Screw terminal (Including a female BNC to terminal block adaptor) Dimensions (W x H x D) 23.2 x 101 x 93.5 mm (0.91" x 3.97" x 3.68") Operating Temperature 0 ~ 60 °C (32 ~ 140 °F) Storage Temperature -20 ~ 70 °C (-4 ~ 158 °F) Storage Humidity 5 ~ 95% RH, non-condensing Ordering Information ƒƒ ADAM-3017-AE Externally powered IEPE signal conditioner Industrial I/O All product specifications are subject to change without notice. Last updated: 16-Jan-2018