ADAM-4150-AE

ADAM-4118 ADAM-4150 ADAM-4168 ADAM-4118 Robust 8-ch Thermocouple Input Module with Modbus Robust 15-ch Digital I/O Module with Modbus Robust 8-ch Relay Output Module with Modbus ADAM-4150 RoHS COMPLIANT 2002/95/EC Specifications ADAM-4168 RoHS COMPLIANT 2002/95/EC Specifications RoHS COMPLIANT 2002/95/EC Specifications General General General ƒƒ Power Consumption 0.5W @ 24 VDC ƒƒ Power Consumption 0.7 W @ 24 VDC ƒƒ Power Consumption 1.8 W @ 24 VDC Analog Input ƒƒ Channels ƒƒ Input Impedance ƒƒ Input Type ƒƒ Input Range Thermocouple 8 differential and independent configuration channels Voltage: 20 MΩ Current: 120 Ω T/C, mV, V, mA J 0 ~ 760°C R 500 ~ 1,750°C K 0 ~ 1,370°C S 500 ~ 1,750°C T -100 ~ 400°C B 500 ~ 1,800°C E 0 ~ 1,000°C Voltage mode Current mode ƒƒ Accuracy ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V ±20 mA, 4 ~ 20 mA Voltage mode: ±0.1% or better Current mode: ±0.2% or better Resolution 16-bit Sampling Rate 10/100 samples/sec (selected by Utility) CMR @ 50/60 Hz 92 dB NMR @ 50/60 Hz 60 dB Overvoltage Protection ±60 VDC High Common Mode 200 VDC Span Drift ±25 ppm/°C Zero Drift ±6μV/°C Built-in TVS/ESD Protection Burn-out Detection Digital Input Relay Output ƒƒ Channels 7 ƒƒ Input Level Dry contact: Logic level 0: Close to GND Logic level 1: Open Wet contact: Logic level 0: 3 V max Logic level 1: 10 ~ 30 V (Note: The Digital Input Level 0 and 1 status can be inverted) ƒƒ Supports 3 kHz Counter Input (32-bit + 1-bit overflow) ƒƒ Supports 3 kHz Frequency Input ƒƒ Supports Invert DI Status ƒƒ Over Voltage Protection 40 VDC ƒƒ Output Channels ƒƒ Contact Rating Digital Output ƒƒ Power Input ƒƒ Watchdog Timer ƒƒ Connector ƒƒ Isolation Voltage ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ 8, open collector to 40 V (1 A max. load) Power Dissipation 1W load max RON Maximum 150 mΩ Supports 1 kHz Pulse Output Supports High-to-Low Delay Output Supports Low-to-High Delay Output Ordering Information ƒƒ Supported Protocols Unregulated 10 ~ 48 VDC System (1.6 second) & Communication 2 x plug-in terminal blocks (#14 ~ 22 AWG) 3,000 VDC ƒƒ ƒƒ Channels Common Specifications General ƒƒ ƒƒ 8 Form A 0.5 A @ 120 VAC (Resistive) 0.25 A @ 240 VAC 1 A @ 30 VDC 0.3 A @ 110 VDC Breakdown Voltage 750 VAC (50/60 Hz) Initial Insulation 1 G Ω min. @ 500 VDC Resistance Relay Response On: 3ms Time (Typical) Off: 1ms Total Switching Time 10 ms Supports 100 Hz pulse output Maximum Operating 50 operations/min Speed (at related load) ASCII Command and Modbus/RTU Environment ƒƒ Operating Humidity 5 ~ 95% RH ƒƒ Operating Temperature -40 ~ 85°C (-40 ~ 185°F) ƒƒ Storage Temperature -40 ~ 85°C (-40 ~ 185°F) ƒƒ ADAM-4118 ƒƒ ADAM-4150 ƒƒ ADAM-4168 Robust 8-ch Thermocouple Input Module w/ Modbus Robust 15-ch Digital I/O Module with Modbus Robust 8-ch Relay Output Module with Modbus RS-485 I/O Modules: ADAM-4000 All product specifications are subject to change without notice Last updated : 19-Mar-2014