ADAM-4150-B

ADAM-4118 ADAM-4150 ADAM-4168 Robust 8-ch Thermocouple Input Module with Modbus Robust 15-ch Digital I/O Module with Modbus Robust 8-ch Relay Output Module with Modbus RoHS ADAM-4118 Specifications RoHS ADAM-4150 COMPLIANT 2002/95/EC COMPLIANT 2002/95/EC Specifications RoHS ADAM-4168 COMPLIANT 2002/95/EC Specifications General General General ƒƒ Certification FCC, CE, UL, UL Class I Division 2 ƒƒ Power Consumption 0.5W @ 24 VDC ƒƒ Certification FCC, CE, UL, UL Class I Division 2 ƒƒ Power Consumption 0.7 W @ 24 VDC ƒƒ Certification FCC, CE, UL ƒƒ Power Consumption 1.8 W @ 24 VDC Analog Input Digital Input ƒƒ Output Channels 8 Form A ƒƒContact Rating 0.5 A @ 120 VAC (Resistive) 0.25 A @ 240 VAC 1 A @ 30 VDC 0.3 A @ 110 VDC ƒƒ Breakdown Voltage 750 VAC (50/60 Hz) ƒƒ Initial Insulation 1 G Ω min. @ 500 VDC Resistance ƒƒ Relay Response On: 3ms Time (Typical) Off: 1ms ƒƒ Total Switching Time 10 ms ƒƒ Supports 100 Hz pulse output ƒƒ Maximum Operating 50 operations/min Speed (at related load) ƒƒ Channels ƒƒ Input Impedance ƒƒ Input Type ƒƒ Input Range Thermocouple J 0 ~ 760°C K 0 ~ 1,370°C T -100 ~ 400°C E 0 ~ 1,000°C 8 differential and independent configuration channels Voltage: 20 MΩ Current: 120 Ω T/C, mV, V, mA R S B 500 ~ 1,750°C 500 ~ 1,750°C 500 ~ 1,800°C Voltage mode Current mode ƒƒ Accuracy ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ±15 mV, ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V ±20 mA, 4 ~ 20 mA Voltage mode: ±0.1% or better Current mode: ±0.2% or better Resolution 16-bit Sampling Rate 10/100 samples/sec (selected by Utility) CMR @ 50/60 Hz 92 dB NMR @ 50/60 Hz 60 dB Overvoltage Protection ±60 VDC High Common Mode 200 VDC Span Drift ±25 ppm/°C (Typical) Zero Drift ±6μV/°C Built-in TVS/ESD Protection Burnout Detection ƒƒ Channels 7 ƒƒ Input Level Dry contact: Logic level 0: Close to GND Logic level 1: Open Wet contact: Logic level 0: 3 V max Logic level 1: 10 ~ 30 V (Note: The Digital Input Level 0 and 1 status can be inverted) ƒƒ Supports 3 kHz Counter Input (32-bit + 1-bit overflow) ƒƒ Supports 3 kHz Frequency Input ƒƒ Supports Invert DI Status ƒƒ Over Voltage Protection 40 VDC Digital Output ƒƒ Channels ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ 8, open collector to 40 V (0.8A max. load) Power Dissipation 1W load max RON Maximum 150 mΩ Supports 1 kHz Pulse Output Supports High-to-Low Delay Output Supports Low-to-High Delay Output Common Specifications General ƒƒ Power Input ƒƒ Watchdog Timer ƒƒ Connector ƒƒ Isolation Voltage ƒƒ Interface (B version) Ordering Information ƒƒ Supported Protocols Unregulated 10 ~ 48 VDC System (1.6 second) & Communication 2 x plug-in terminal blocks (#14 ~ 22 AWG) 3,000 VDC RS-485, micro USB Relay Output ASCII Command and Modbus/RTU Environment ƒƒ Operating Humidity 5 ~ 95% RH ƒƒ Operating Temperature -40 ~ 85°C (-40 ~ 185°F) ƒƒ Storage Temperature -40 ~ 85°C (-40 ~ 185°F) ƒƒ ADAM-4118 ƒƒ ADAM-4150 ƒƒ ADAM-4168 Robust 8-ch Thermocouple Input Module w/ Modbus Robust 15-ch Digital I/O Module with Modbus Robust 8-ch Relay Output Module with Modbus RS-485 I/O Modules: ADAM-4000 All product specifications are subject to change without notice. Last updated: 25-Feb-2020