AMAX-2752SY

AMAX-2750SY Series Features  Max. 20 Mbps transfer rate  Onboard terminal for direct wiring 32-ch Isolated Digital Input/Output Slave Modules  Easy installation with RJ45 phone jack and LED diagnostic  LED indicator for each IO channel (switch by SW4)  Selection of I/O-channel configuration (32-ch DI, 32-ch DO or 16/16-ch Digital I/O)  2,500 Vrms Isolation voltage  Suitable for DIN-rail mounting AMAX-2752SY AMAX-2754SY AMAX-2756SY RoHS 2002/95/EC COMPLIANT Introduction The AMAX-2750SY series consists of digital slave modules for AMONet RS-485 that extend the digital I/O capacity. All the digital I/O slave extension modules are connected serially with a simple Cat.5 cable. This reduces wiring between driver and controller and is very suitable for highly integrated machine automation applications. High speed, scalability and cost-effectiveness ensures a solid solution for machine builders. There are 3 main types of digital I/O slave modules, 32-ch digital input, 32-ch digital output, and 16/16-ch digital input/output. With these slave modules, you can connect actuators/ sensors directly with minimum hassle. You can access I/O points nearby or 100 meters away using simple and low-cost wiring, and the high speed of AMONet RS-485 makes it possible to scan 2048 I/O channels in 1.04 ms. Specifications Isolated Digital Input  Channels     AMAX-2752SY: 32 (4 ports) AMAX-2756SY: 16 (2 ports) Input Type Dry contact Isolation Protection 2,500 VRMS Opto-Isolator Response 18 μs Input Resistance 1 kW @ 0.5 W General      Bus Type Certifications Connectors Dimensions (L x W x H) Power Consumption AMONet RS-485 CE 2 x RJ45 and 2 x 40-pin wiring board 125 x 47.6 x 151 mm (4.9" x 1.8" x 5.9") AMAX-2752SY: 1.2 W typical, 13 W max. AMAX-2754SY: 1.2 W typical, 5 W max. AMAX-2756SY: 1.2 W typical, 8 W max. Power Input 24 VDC within 200 mA ripple Power Supply for DIO 10 ~ 30 VDC (Current < 2A) Humidity 5 ~ 95% RH, non-condensing (IEC 68-2-3) Operating Temperature 0 ~ 60° C (32 ~ 140° F) Isolated Digital Output  Channels     Output Type Isolation Protection Output Voltage Sink Current AMAX-2754SY: 32 (4 ports) AMAX-2756SY: 16 (2 ports) Sink (NPN) (open collector Darlington transistors) 2,500 VRMS 10 ~ 30 VDC 1CH: 500 mA (1 port) 150 mA/ea. for multiple-channel usage, total 1.1A max.     Ordering Information  AMAX-2752SY  AMAX-2754SY  AMAX-2756SY 32-ch Isolated Digital Input AMONet Module 32-ch Isolated Digital Output AMONet Module 16/16-ch Isolated Digital I/O AMONet Module Motion Control I/O Modules AMAX-2750SY Series Pin Assignments Online Download www.advantech.com/products