BB-EIRP610-2SFP-T

Managed Industrial Ethernet Switch 2 GB RJ-45/SFP Ports, 8 PoE Ports EIRP610-2SFP-T PRODUCT FEATURES • • • • • • The EIRP610-2SFP-T is a 10 Port Managed Industrial Gigabit Ethernet Switch. In addition to 8 PoE copper RJ-45 ports, it has 2 RJ-45/SFP Combo ports to accommodate Gigabit Ethernet. Small Form-factor Pluggable (SFP) Port: The SFP Ports provide flexibility when planning a network. Modules are available in multiple fiber formats. If an SFP module is not inserted, the associated combo port can be used with standard RJ-45 copper. High-Speed Transmissions: The switch includes a switch controller that automatically senses transmission speed (10/100/1000 Mbps on two RJ45/SFP combo ports; 10/100 on eight PoE RJ45 copper ports). The RJ-45 interface also auto-detects MDI or MDI-X, eliminating the requirement for a crossover cable. Each port is buffered and supports store-and-forward protocol. Dual Power Input: To reduce the risk of power failure, the switch has two 48 VDC power inputs. If the power fails, the switch will automatically use the secondary power input. Also, if the power goes out the corresponding P1 or P2 LED will go out and the Fault LED will light. The contacts for the alarm output will also open. Flexible Mounting: IP30 metal enclosure - DIN or Panel mounted. Managed: Powerful management functions including SNMP, LACP, VLAN, Port Trunking, Port Mirroring, Redundant Ring Technology, and Spanning Tree/Rapid Spanning Tree Protocol. Power Over Ethernet (PoE): The eight 10/100 ports are classified as power sourcing equipment (PSE). These ports can be used to power IEEE 802.3af compliant powered devices (PD), eliminating the need for a separate power supply for each device. Wide Operating Temperature: With an operating temperature of -40 to 75°C (-40 to 167°F), this switch is suitable for use in harsh industrial environments. Easy Troubleshooting: There are two LED indicators for each port that display the link status and transmission speed. Three LED indicators for power (P1, P2 and Fault) show power status. FWD LEDs on each PoE port indicate when a powered device is connected. These indicators allow you to quickly diagnose and correct problems and ensure your network remains reliable. www.bb-elec.com | Eight 10/100 BaseT 802.3af end point PoE injector ports Two RJ-45/SFP combo slots for Gigabit Ethernet Redundant ring technology for fast recovery Wide operating temperature DIN Rail or Panel Mount NEMA TS2 Ordering Information Model Number description Gigabit Switch (8 CU, 2 CU/SFP) EIRP610-2SFP-T Industrial Power Over Ethernet Sourcing Accessories SDR-240-48 - DIN-Rail Power Supply, 10A, 240W, 48V C5UMB3FBL - 3 ft. - Blue - Category 5e UTP Patch Cord DFMM-LCLC-1M - Multi-Mode Duplex Fiber Cable, LC To LC, 1 Meter DFSM-LCLC-1M - Single-Mode Duplex Fiber Cable, LC To LC, 1 Meter SFP-1000SX-M-550M-T - SFP Module, 1000Base-SX, Multi-mode 550m, LC Connector (-40 to 85°C) SFP-100FX-M-2KM-T - SFP Module, 100Base-FX, Multi-mode 2km, LC Connector (-40 to 85°C) SFP-1000LX-S-10KM-T - SFP Module, 1000Base-LX, Single-mode 10km, LC Connector (-40 to 85°C) SFP-1000LX-S-20KM-T - SFP Module, 1000Base-LX, Single-mode 20km, LC Connector (-40 to 85°C) SFP-100FX-S-30KM-T - SFP Module, 100Base-FX, Single-mode 30km, LC Connector (-40 to 85°C) Mechanical Diagram 6.2 cm 2.44 in 8.4 cm 3.31 in 13.1 cm 5.16 in EIRP610-2SFP-T_3713ds Managed Industrial Ethernet Switch 2 GB RJ-45/SFP Ports, 8 PoE Ports EIRP610-2SFP-T specifications Regulatory FCC, CE, UL, NEMA TS2 Approvals UL File Number: E173795 Free Fall IEC60068-2-32 Shock IEC60068-2-27 Vibration IEC60068-2-6 IEEE Standards IEEE 802.3 802.3. 10Base-T Ethernet IEEE 802.3u 100Base-TX and 100Base-FX Fast Ethernet IEEE 802.3ab 1000Base-T IEEE 802.3z Gigabit Fiber IEEE 802.3x Flow Control and Back Pressure IEEE 802.3ad Port trunk with LACP IEEE 802.3f Power over Ethernet IEEE 802.3d Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN Tag IEEE 802.1x User Authentication (RADIUS) IEEE 802.1ab LLDP Network Specifications Back-plane (Switching Fabric): 5.6Gbps Architecture Throughput (Full-dux): 3.3Mpps@64bytes 14,880 pps Ethernet Port Transfer Rate 148,800 pps Fast Ethernet Port 1,488,000 pps Gigibit Fiber Ethernet Buffer 1 MB MAC Table 8K Flash ROM 4 MB DRAM 32 MB Broadcast Storm Filtering Other CSMA/CD Interface 8 x 10/100BaseT, 2 x10/100/1000, RJ-45 Ports Auto MDI/MDI-X CU/SFP 2 x Mini-GBIC SFP Combo Ports P1, P2 (Green) to indicate power Fault (Red) to indicate fault Mater (Green) to indicate ring master Link Activity on 10/100 ports (Green) Full Duplex / Collision (Amber) LED SFP LNK/ACT (Green) 1000T LNK/ACT (Green) 1000M (Green) FWD on PoE ports to indicate if a powered device is connected PoE Ports 1 through 8 802.3af End Point Alternative A Standard Power Source Equipment (PSE) Capacity 15.4W per port Pin Assignment 1 & 2 – VCC(+), 3 & 6 – VCC(-) Software Features Management SNMP v1, v2C, v3, Web, Telnet, CLI RFC 1215 Trap, RFC1213 MIBII, RFC 1157 SNMP MIB, RFC 1493 Bridge SNMP MIB MIB, RFC 2674 VLAN MIB, RFC 1643, RFC 1757, RSTP MIB, Private MIB, LLDP MIB orders@bb-elec.com support@bb-elec.com VLAN Port Trunk w/LACP LLDP Spanning Tree X-Ring Quality of Service Class of Service Port Security Port Mirror IGMP IP Security Login Security Bandwidth Control Flow Control System Log SMTP SNMP Trap DHCP DNS SNTP Firmware Update Power Input Voltage Power Connection Wire Size Power Use Fault Output Environmental Operating Temperature Storage Temperature Operating Humidity Mechanical Enclosure Mounting Dimensions Port Based VLAN IEEE 802.1Q Tag VLAN (256 entries) VLAN ID (1 to 4096), GVRP (256 groups) 4 trunk groups / 4 trunk members Allows the switch to advertise its Identification and capabilities on the LAN 802.1d Spanning Tree 802.1w Rapid Spanning Tree Dual Homing, Ring Coupling, Dual Ring topologies. Recovery time below 20mS Determined by port, tag, IPv4 type of service, and IPv4/IPv6 different service 802.1p class of service, 4 priority queues per port Supports 100 static MAC entries and 100 MAC Filter entries Supports TX, RX, and both packet IGMP Snooping v1, v2 (256 multi-cast groups and IGMP Query 10 IP address entries for permission to access management functions 802.1X Authentication / RADIUS Ingress Packet Filter and Egress Packet Limit. The egress rate control supports all packet types. Limit rates are: 100K to 102400 Kbps (10/100) and 100 K to 256000 Kbps (1000). Ingress packet Filter Type combination rules are Broadcast, Multi-Cast, Unknown Unicast, Broadcast/Multi-cast, Broadcast only, and all packets. Flow control full-dux, backpressure half-dux System Log and remote system log server SMPT SVR and 6 e-mail accounts for alerts Cold Start, Link Down, Link Up, Authorization Fail, PD Disconnect (PoE port event) Client, Server, Port and IP Binding DNS client with primary and secondary DNS server SNTP to synchronize system clock TFTP update, backup and restore Dual 48 VDC Inputs Reverse Polarity Protection Removable Terminal Block 12 to 24 AWG 9.6 Watts (Without PoE Load) 116 Watts (Full PoE Load) 1 Relay Output – Normally Closed - 40 to 75°C (-40 to 167°F) - 40 to 85°C (-40 to 185°F) 0 to 95% IP30 Metal Enclosure 35 mm DIN Rail or Panel Mount Attachments 6.2 x 8.4 x 13.1 cm (2.44 x 3.31 x 5.16 in) International Office: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445