BB-JC10F50-V

Split-core Current Transducers/Sensors Models BB-JC10F50-V, BB-JC24S250-V, BB-JC36S500-V www.advantech-bb.com BB-JC10F50-V + All-in one structure in a small size + Connect directly to PLCs + Sense motor stalls and short circuits + Industrial instrumentation + Process control loops + Phased fired-controlled heaters + UL, CSA, CE and RoHS available ORDERING INFORMATION OVERVIEW These split-core current transducers are designed for energy management with a convenient connection to electronic submetering. They may also be applied for current measurement in a system of distributed power line carriers (PLCs) or remote controls such as SCADA software for automation and supervision. Other applications include security and condition monitoring, load monitoring, protection systems, and predictive maintenance of conveyors, pumps, HVAC motors and more. LOAD TREND MONITOR PER DISTRIBUTION PANEL When a sensor outputting analog instrumentation signals in proportion to load current, is clamped directly onto the main or branch wiring of the distribution panel, direct input into analog port as PLC or data logger becomes available without a converter in the middle. CURRENT RANGE (50/60 HZ) OUTPUT IMPEDANCE BB-JC10F50-V 50 Arms 6.2K Ω 45g BB-JC24S250-V 250 Arms 5.8K Ω 200g BB-JC36S500-V 500 Arms 5.8K Ω 290g MODEL NUMBER WEIGHT SPECIFICATIONS – All Models TECHNOLOGY Output Voltage 0~5V DC (average) / 0 ~ rated current, 7.5V DC limiter built-in Maximum Allowable Current 100% (continuous) 150% (1 min.) Accuracy/Linearity ± 2% FS.dynamic range 1:100 (50/60 Hz sinewave) Output Ripple Voltage Within 5% of output voltage Response Time 300 ms Insulation Resistance DC500V / 100M Ω or more (between core and output terminals) Dielectric Strength AC 2000V / 1 min. (between core and output terminals) MECHANICAL Sensing Aperture 10mm (clamp-on type) Latch/Unlatch About 150 times Output Terminals 2 x M3-screw with terminal covers Tightening Torque 0.3 Nm ENVIRONMENTAL Operating Conditions -20 ~ +50 °C, ≤85% RH, No condensation, In-house & any direction installable Storage Conditions -30 ~ +90 °C, ≤85% RH, No condensation All product specifications are subject to change without notice. BB-JCxFx-V_CurrentSensors_3718ds orders@advantech-bb.com support@advantech-bb.com Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445 Split-core Current Transducers/Sensors Models BB-JC10F50-V, BB-JC24S250-V, BB-JC36S500-V BB-JC24S250-V DIMENSIONS – BB-JC10F50-V Unit = mm 0-V 4S 25 JC 2 JC10F5 0-V OUTPUT VOLTAGE DATA CONNECTING THE LEAD WIRE J -V 500 6S C3 DIMENSIONS – BB-JC24S250-V Unit = mm 34 22 45 24 74.5 52 DIMENSIONS – BB-JC36S500-V Unit = mm 40.5 22 57 36 91 62 orders@advantech-bb.com support@advantech-bb.com Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104 European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445