BB-RPS-V2-WR2-US

Wall mount 12W SYS1561-Wxx series GREEN MODE Country of Origin : China Operating Temperature : 0~40 [°C] Dimension : 65 x 45 x 30 [mm] Certified AC Plugs: USA/Japan Efficiency level (ErP) : VI RoHS Approvals / Marks : Specifications Model Voltage DC [V] Loading [A] Max. Power [W] Ripple / Noise [mV] p-p Connector [mm] 12 0~1.0 12 200 Terminal Block 2PIN BB-RPS-v2-WR2-US SUNNY PN: SYS1561-1212-W2 (Terminal Block 2PIN) 2wc 1.5m (5ft), customer logo ADVANTECH Features: W2 - USA, Canada, Japan, Taiwan Regulated Output With Low Ripple Noise | Safety Agency Requirements and EMI/EMS Certified 2 Years Warranty OUTPUT CE Turn delay 5000 ms max @ AC low line input＠output full load EMC 2014/30/EU Hold up time 5ms min@AC nominal input@output full load (>half cycle) LVD 2014/35/EU EN 60950-1:2006+A11+A1+A12+A2 Efficiency (Normal) Meet CEC,DOE,ERP,MEPS Level VI @115v/60HZ,230V/50HZ SAFETY 0.3v dv max At AC nominal input loading from 50% load to max load or peak load UL | GS | CB | CE | FCC |BSMI | PSE | SAA | RCM | EAC 8ms tmax | Dynamic rise time 10uS max , duty 40mS max , Dynamic load step is slew rate of 0.5A/uS OTHERS Transient response (dv,tmax) Power out.Limit Peak 13W for SYS1561-1212 Burn in limit Full load 2 Hours Power consumption Less than 0.075W ms max. At AC nominal input@output min load INPUT Voltage (90~264)VAC Frequency (47~63)hz Current 0.5A rms @ AC low line input and DC output full load Inrush Surge Current (cold start) 40/60A max@power supply cold start,ambient temperature 25°C @115Vac/230Vac nominal AC input leakage current 0.25mA Max Dielectric Strength (Hi-pot) Primary to Secondary:3000VAC 10mA/60S M.T.B.F 500,000 Calculated Hours at 25ºC, by Telcordia SR-332 Cable Length 1500mm (5 feet) PLD (power line disturbance) Line power surge | Line voltage SAG-more info on request Cooling method Natural Convection Cooling Housing material PC Temperature coefficient: < ±0.5% / ℃ ENVIRONMENT Temperature Operating: (0 ~ 40)°C / Storage: (-20 ~ 85)°C Humidity Over current/ Short protection The power supply will self-protect any output to ground & auto recovery when abnormal circuit faults remove. An output short circuit is defined as any output impedance less than 0.1 ohms. Operating: 8%~90%RH / Storage: 5%~95% RH non condensing Over Voltage The power supply will be auto recovered when faults remove NW: 70g/pc Input protection F1:1A 250V Fuse The power supply shall be protected against power line surges and any abnormal condition GW: 95g/pc No Load protection The power supply is provided with no load operation to prevent the power supply and system from damage. PACKING Protection class II Carton box PROTECTION WEIGHT www.bb-smartcellular.eu small box 1pc / 116x54x84mm Wall mount SYS1561-Wxx series Mechanical case specification: Mechanical specification (country housing): US / Japan type (W2) Cable specification: www.bb-smartcellular.eu 12W