BB-UHR401.

One and Two Port Ruggedized USB Isolators BB-UHR401 & BB-UHR402 www.advantech.com PRODUCT FEATURES • • • • • • • The BB-UHR401 and BB-UHR402 are one and two port ruggedized Isolators. They are designed and tested to meet heavy industrial EMC standards. High retention USB connectors hold standard USB cables tight and are perfect for high vibration applications – requiring up to 3.2 lbs force to disconnect them. They have 4 kV isolation between the upstream and downstream USB ports to protect expensive equipment from dangerous ground loops and to help ensure data integrity. The heavy Iindustrial EMC specifications allow these isolators to operate in unfriendly electrical environments – such as near variable frequency drives, motor control centers, welding, and other large electrical loads. They are powered from an external 10 to 30 VDC power supply (required). An international power supply is included that has USA, EU, and UK blades. The downstream port(s) provides up to 500 mA of power to connected USB devices. 4 kV isolation protects equipment and data ESD protection – 15 kV Air USB 2.0, full speed (12 Mbps) Panel mount, heavy-duty case (optional DIN rail adaptor clips) High retention USB connectors One and Two Port Versions Both a power supply and a USB cable are included ORDERING INFORMATION MODEL NUMBER USB SPEED BB-UHR401 1-Port Rugged USB Isolator BB-UHR402 2-Port Rugged USB Isolator Includes: 12 VDC Wall Plug-In Power Supply and 1.8 m (6 ft) USB Cable. ACCESSORIES - sold separately BB-PS12VLB-INT-MED - Replacement power supply 12VDC, Medical Grade US, EU, UK blades. BB-MDR-20-24 - DIN rail mount power supply 24VDC, 1.0 A output power BB-PSPT-LB - Stripped and tinned power connector for use with industrial power supply. Locking barrel connector. BB-USBAMBM-6F - USB Cable, 1.8 m (6 ft), Type A Male/Type B Male (Grey) (one included) BB-DRAD35 - DIN rail adapter clip All product specifications are subject to change without notice. BB-UHR401 & BB-UHR402_2220ds Advantech B+B SmartWorx, 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 1 (800)346-3119/Toll Free | orders@advantech-bb.com | support@advantech-bb.com One and Two Port Ruggedized USB Isolators BB-UHR401 & BB-UHR402 SPECIFICATIONS USB INTERFACE Standards Upstream Port Downstream Port Speed Isolation ESD High Retention INTERFACE USB Ports LED Indicators POWER Source Power Connector Input Voltage PSU Barrel Jack Power Downstream Power INDICATORS Power Port Ready USB 1.1 & 2.0 (12 Mbps) (1) Type B Female – High Retention (1 or 2) Type A Female – High Retention 12 Mbps Multi-transaction Translator, 1 per port 4 kV – Upstream to Downstream 15 kV Air, 8 kV Contact USB ports require 15 N (3.2 lbs-force) withdrawal force using standard USB cable High Retention USB Type B (Upstream) , Type A (Downstream), Minimum withdrawal force of 15 Newtons (~3.4 lbs-force) Power from USB bus External, required (included) Threaded barrel jack 10 to 30 VDC Input :110 – 240 VAC, 50 / 60 Hz US, EU, UK blades included Output: 12 VDC Barrel Jack, Center Positive BB-UHR401 – 4 Watts (external source) BB-UHR402 – 7 Watts (external source) Locking / Threaded, Center Positive 500 mA per port MECHANICAL Dimensions 7.9 x 5.4 x 2.7 cm (3.1 x 2.1 x 1.1 in) Enclosure IP 30, Plastic Weight 0.15 lb (80 g) MEANTIME BETWEEN FAILURES (MTBF) MTBF BB-UHR401 375842 Hours MTBF BB-UHR402 353807 Hours MTBF Calc. Method MIL 217F Parts Count Reliability ENVIRONMENTAL Operating Temperature 0 to +50 °C Storage Temperature -40 to +85 °C Operating Humidity 0 to 95%, non-condensing APPROVALS/CERTIFICATIONS FCC, CE KCC, R(MSIP) ID#: MSIP-REM-AK0-UHR401 (Models BB-UHR-401, BB-UHR402) 2014/30/EU - Electromagnetic Compatibility Directive CE 2011/65/EU - amended by (EU) 2015/863 Reduction of Hazardous Directives Substances Directive (RoHS) 2012/19/EU - Waste Electrical and Electronic Equpment (WEEE) EN 55032 Class B - Electromagnetic compatibility of multimedia equipment 2.7 cm 5.4 cm - Emission requirements 1.1 in CE 2.1 in EN 55024 - InformationjTechnology Equipment - Immunity Characteristics Standards Limits and Methods of measurement EN 61000-6-4 +A1 - Generic Emission standard for industrial environments EN 61000-6-2 - Generic Immunity standard for industrial environments IEC60068-2-27 - (Shock) 50G Peak, 11 ms, 3 axes IECx IEC60068-2-6 - (Vibration) 4G, 140-500 Hz, 3 axes IEC60068-2-32 - (Drop) 10 total drops from sides, corner, edges Green LED Green LED 7.9 cm 3.1 in MECHANICAL DIAGRAM 2.7 cm 1.1 in 5.4 cm 2.1 in 6.35 cm 2.5 in 7.9 cm 3.1 in Advantech B+B SmartWorx, 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA (800)346-3119/Toll Free | orders@advantech-bb.com | support@advantech-bb.com