DRP-480S-24

D R P - 4 8 0 S series 480W Single Output DIN RAIL with PFC Function ■ Features : •AC input range selectable by switch •Built-in passive PFC function compliance to EN61000-3-2 •High efficiency 89% and low dissipation •Protections: Short circuit / Overload / Over voltage / Over temperature •Cooling by free air convection •Built-in constant current limiting circuit •Can be installed on DIN rail TS-35/7.5 or 15 •UL 508(industrial control equipment)approved •EN61000-6-2(EN50082-2) industrial immunity level •100% full load burn-in test •3 years warranty .. SPECIFICATION MODEL OUTPUT INPUT DRP-480S-24 DRP-480S-48 DC VOLTAGE 24V 48V RATED CURRENT 20A 10A CURRENT RANGE 0 ~ 20A 0 ~ 10A RATED POWER 480W 480W RIPPLE & NOISE (max.) Note.2 120mVp-p 120mVp-p VOLTAGE ADJ. RANGE 24 ~ 28V VOLTAGE TOLERANCE Note.3 ±1.0% 48 ~ 55V ±1.0% LINE REGULATION ±0.5% ±0.5% LOAD REGULATION ±1.0% ±1.0% SETUP, RISE TIME 1200ms, 40ms/230VAC,115VAC at full load HOLD UP TIME (Typ.) 23ms/230VAC,115VAC at full load VOLTAGE RANGE 90 ~ 132VAC/180 ~ 264VAC by switch FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) ≧0.7/230VAC only EFFICIENCY (Typ.) 89% AC CURRENT (Typ.) INRUSH CURRENT (Typ.) 8A/115VAC 3.2A/230VAC COLD START 27A/115VAC 45A/230VAC LEAKAGE CURRENT