EKI-2541M-AE

EKI-2541M/MI EKI-2541S/SI 10/100T(X) to Multi-Mode SC Type Fiber Optic Industrial Media Converter 10/100T(X) to Single-Mode SC Type Fiber Optic Industrial Media Converter Features ƒƒ Provides 1 x 10/100 Mbps Ethernet port with RJ45 connector ƒƒ Provides 1 x 100 Mbps multi-mode/single-mode SC type fiber port ƒƒ Provides internal jumper for Link Fault Pass-through (LFP) setting ƒƒ Supports full/half duplex flow control ƒƒ Supports store and forward transmission ƒƒ Supports auto-negotiation ƒƒ Supports MDI/MDI-X auto crossover ƒƒ Supports redundant +12-48 VDC power input ƒƒ Provides flexible mounting: DIN-rail & Panel Mounting ƒƒ Supports wide operating temperatures from -40 ~ 75°C (EKI-2541MI/SI) EKI-2541M EKI-2541S RoHS COMPLIANT 2002/95/EC Introduction EKI-2541M/2541S is designed to convert Ethernet networks to fiber networks by transparently converting Ethernet signals to optic signals. The advantages of fiber optics are wide bandwidth, EMI immunity and long-distance transmissions.Therefore, EKI-2541M/2541S is an ideal solution for “fiber to building” applications at central offices or local sites. EKI-2541M/2541S supports MDI/MDIX auto detection, so you don’t need to use crossover wires. Furthermore, the EKI-2541M/2541S can work normally from -10 ~ 60°C and accepts a wide voltage range from +12 ~ 48 VDC. Besides, it also provides 3,000 VDC surge (EFT) protection against over-voltage, so it is suitable for harsh operating environments. Link Fault Pass-Through (LFP) EKI-2541M/2541S is an enhanced Ethernet to fiber-optic converter. Aside from its standard features, the versatile EKI-2541M/2541S also has the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the internal jumper to enable the LFP function, then EKI-2541M/2541S will force the link to shut down as soon as noticed that the other link has failed, giving the application software a chance to react to the situation. Specifications Mechanism Communications ƒƒ Standard ƒƒ LAN ƒƒ Transmission Distance ƒƒ Transmission Speed ƒƒ Optical Fiber Multi Mode (EKI-2541M/MI) Signal Mode (EKI-2541S/SI) IEEE802.3, 802.3u, 802.3x 10/100Base-T(X), 100Base-FX Ethernet: Up to 100m Fiber: Multi-mode: up to 2 km Fiber: Single-mode: up to 30 km Up to 100 Mbps Wavelength: 1310nm Tx Power: -14/-20 dBm Rx Sensitivity: -31dBm Parameters: 50/125um,62.5/125um Wavelength: 1310nm Tx Power: -8/-15 dBm Rx Sensitivity: -34dBm Parameters: 9/125um Interface ƒƒ Connectors ƒƒ LED Indicators ƒƒ DIP Switch 1 x RJ-45 1 x SC type fiber connector 6-pin removable screw terminal (power) P1, P2, P-Fail Ethernet: 10/100M, LNK/ACT Fiber: HDX/FDX, LNK/ACT Port/Power Alarm, LFP Fiber: HDX/FDX, Converter/Switch Power ƒƒ Power Consumption ƒƒ Power Input Max. 2.7W 12 ~ 48 VDC, redundant dual inputs Industrial Ethernet Solutions ƒƒ Dimensions (W x H x D) ƒƒ Mounting ƒƒ Enclosure 37 x 140 x 95 mm DIN-rail, Wall IP30, Metal shell with solid mounting Protection ƒƒ Power Reverse ƒƒ Overload Present 0.9 A @ 12 VDC (Resetable Fuse) Environment ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ Operating Temperature Wide Temp. model Storage Temperature Operating Humidity Storage Humidity MTBF -10 ~ 60°C (14 ~ 140°F) -40 ~ 75°C (-40 ~ 167°F) -40 ~ 85°C (-40 ~ 185°F) 5 ~ 95% (non-condensing) 0 ~ 95% (non-condensing) 577,175 hrs Certifications ƒƒ Safety UL 60950-1, CAN/CSA-C22.2 No.60950 ƒƒ EMC U.S.A.: FCC Part 15 CISPR 22 EU: EN55011, EN61000-6-4, EN55022 Class A, EN61000-3-2/3, EN55024, IEC61000-4- 2/3/4/5/6/8, EN61000-6-2 ƒƒ Shock IEC60068-2-27 ƒƒ Freefall IEC60068-2-32 ƒƒ Vibration IEC60068-2-6 Ordering Information ƒƒ ƒƒ ƒƒ ƒƒ EKI-2541M EKI-2541MI EKI-2541S EKI-2541SI Ethernet to MM Fiber Converter Ethernet to MM Fiber Converter w/ Wide Temp. Ethernet to SM Fiber Converter Ethernet to SM Fiber Converter w/ Wide Temp.