EKI-3541M-AE

EKI-3541M EKI-3541S 10/100T (X) to Multi-Mode SC Type Fiber Optic Industrial Media Converter 10/100T (X) to Single-Mode SC Type Fiber Optic Industrial Media Converter Features NEW ƒƒ Provides 1 x 10/100 Mbps Ethernet port with RJ45 connector ƒƒ Provides 1 x 100 Mbps Multi-mode/Single-mode SC type fiber port ƒƒ Supports Link Fault Pass-through (LFP) function ƒƒ Supports full/half duplex flow control ƒƒ Supports store and forward transmission ƒƒ Supports Auto-Negotiation ƒƒ Supports MDI/MDI-X auto crossover ƒƒ Supports redundant 12-48 VDC power input ƒƒ Provides flexible mounting: DIN-rail and Wall mount EKI-3541S EKI-3541M RoHS COMPLIANT 2002/95/EC Introduction EKI-3541M/3541S is designed to convert Ethernet networks to fiber networks by transparently converting Ethernet signals to optic signals. The advantages of fiber optics are wide bandwidth, EMI immunity and long-distance transmissions.Therefore, EKI-3541M/3541S is an ideal solution for “fiber to building” applications at central offices or local sites. EKI-3541M/3541S supports MDI/MDIX auto detection, so you don’t need to use crossover wires. Furthermore, the EKI-3541M/3541S can work normally from -10 to 60°C and accepts a wide voltage range from 8.4 ~ 52.4 VDC. Besides, it also provides 4,000 VDC surge (EFT) protection against over-voltage, so it is suitable for harsh operating environments. Link Fault Pass-Through (LFP) EKI-3541M/3541S is an enhanced Ethernet to fiber-optic converter. Aside from its standard features, the versatile EKI-3541M/3541S also has the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the internal jumper to enable the LFP function, then EKI-3541M/3541S will force the link to shut down as soon as noticed that the other link has failed, giving the application software a chance to react to the situation. Specifications Communications Mechanism ƒƒ Standard IEEE 802.3, 802.3u, 802.3x ƒƒ LAN 10/100Base-T (X), 100Base-FX ƒƒ Transmission Distance Ethernet: Up to 100 m Fiber: Multi-mode: up to 2 km Fiber: Single-mode: up to 30 km ƒƒ Transmission Speed Up to 100 Mbps ƒƒ Optical Fiber Multi-mode Wavelength: 1310 nm (EKI-3541M) Tx Power: -14/-20 dBm Rx Sensitivity: -31 dBm Parameters: 50/125 um,62.5/125 um Single-mode Wavelength: 1310 nm (EKI-3541S) Tx Power: -8/-15 dBm Rx Sensitivity: -34 dBm Parameters: 9/125 um ƒƒ Dimensions (W x H x D) 28.5 x 120 x 85.3 mm (1.02" x 4.73" x 3.35") ƒƒ Mounting DIN-rail, Wall ƒƒ Enclosure IP40, plastic and metal shell with solid mounting kits Interface Certifications ƒƒ Connectors ƒƒ LED Indicators ƒƒ DIP Switch 1 x RJ45 1 x SC type fiber connector 6-pin removable screw terminal (power) P1, P2, P-Fail LFP, LNK/ACT (FX), FDX/COL (FX) T(X):Speed and HDX/FDX, LFP Fiber: HDX/FDX, T(X):Auto-Negociation Protection ƒƒ Power Reverse ƒƒ Overload current Environment ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ Operating Temperature -10 ~ 60°C (14 ~ 140°F) Storage Temperature -40 ~ 85°C (-40 ~ 185°F) Operating Humidity 5 ~ 95% (non-condensing) Storage Humidity 0 ~ 95% (non-condensing) MTBF 597,488 hours (EKI-3541M and EKI-3541S) ƒƒ Safety ƒƒ EMI ƒƒ EMS Power ƒƒ Power Consumption ƒƒ Power Input Max. 2.4 W 12 ~ 48 VDC, redundant dual inputs All product specifications are subject to change without notice Industrial Ethernet Solutions Present Present ƒƒ Shock ƒƒ Freefall UL 60950-1, CAN/CSA-C22.2 No.60950 FCC Part 15 Subpart B Class A, EN 55011/55022 Class A EN 61000-4-2 (Level 3) EN 61000-4-3 (Level 3) EN 61000-4-4 (Level 4) EN 61000-4-5 (Level 3) EN 61000-4-6 (Level 3) EN 61000-4-8 (Level 4) IEC 60068-2-27 IEC 60068-2-32 EKI-3541M/S Mounting Dimensions Unit: mm 8.60 [0.34] 40 [1.57] .2 [Ø 0 85.30 [3.36] 94.26 [3.71] .0 9.80 [0.39] 85.30 [3.36] 94.30 [3.71] 99.30 [3.91] Ordering Information ƒƒ EKI-3541M ƒƒ EKI-3541S 0 3.5 10/100T (X) to Multi-Mode SC Type Fiber Optic Industrial Media Converter 10/100T (X) to Single-Mode SC Type Fiber Optic Industrial Media Converter Online Download www.advantech.com/products ] .14 [Ø0 Ø 3.50 [0.14] 90 [3.54] Ø5 74.30 [2.93] 44.5 [1.75] 130 [5.12] 120 [4.72] Applied for type of top that rail EN 50022-35x7.5mm 28.5 [1.12] 31.48 [1.24] 36.30 [1.43] 0] 40 [1.57] 7.60 [0.30] 36.30 [1.43] 24.60 [0.97] 7.60 [0.30] Wall Mounting 8.60 [0.34] DIN-rail Mounting