EKI-5624P-AE

EKI-5624P EKI-5624PI 4FE with PoE+2GE Industry Ethernet Proview PoE Switch Features ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ ƒƒ Four Fast Ethernet ports comply with IEEE 802.3af/at PoE standard and Two Gigabit Ethernet ports Communicates with SCADA software via Modbus/TCP Communicates with NMS (Networking management system) via SNMP Port-based QoS for deterministic data transmission -40~65°C operating temperature range (EKI-5624PI) EMS level 3 protection for extreme outdoor environments IEEE 802.3az Energy Efficient Ethernet (EEE) Jumbo Frame Support (Up to 9,216 Bytes) Supports redundant 12V~24V (9V ~ 36V) power input and P-Fail relay Loop detection Introduction The EKI-5624P and EKI-5624PI switches support Power-over-Ethernet on ports 1 to 4. The switch is classified as power source equipment(PSE). Also it is the world’s first convergence switches for process control and IT networking management. This series uses Modbus/TCP to communicate with the SCADA software and SNMP to communicate with the NMS (Networking Management System) at the same time, thereby allowing full read control over the devices either for control engineers or for IT. The devices come with the Port-based QoS for deterministic data transmission allows the priority ports to prioritize the traffic coming over those ports and delay the less immediately necessary data over the remaining ports. The switches use the highest quality components, to enable the range to operate in temperatures of between -40 and 75°C along with EMS Level 3 protection to repel electromagnetic interface for industrial resistance. The switches are compliant E-mark for in-vehicle application and surveillance system. Specifications Communications Power ƒƒ Standard ƒƒ Power Consumption ƒƒ Power Input ƒƒ Power Budget IEEE 802.3af/at, 802.3, 802.3u, 802.3ab, 802.3az, 802.3x, 802.1p ƒƒ LAN 10/100BaseT(X),10/100/1000BaseT(X) ƒƒ Transmission Distance Up to 100 m ƒƒ Transmission Speed Up to 1000 Mbps Interface ƒƒ Connectors 4 x 10/100BaseT(X) with PoE + 2 x 10/100/1000 Base T(X) 6-pin removable screw terminal (power & relay) LED Indicators ƒƒ System LED ƒƒ Port LED status P1, P2, P-Fail, Loop, PoE 10/100 BaseT(X) or 10/100/1000Base T(X): LNK /ACT, Speed, PoE port Certification ƒƒ Safety ƒƒ EMC ƒƒ EMI ƒƒ EMS Physical ƒƒ ƒƒ ƒƒ ƒƒ Enclosure Metal / Aluminum Shell with solid mounting kits Protection Class IP30 Installation DIN-Rail and Wall-Mount Dimensions (W x H x D) 74 x 152 x 105 mm (2.913 x 5.984 x 4.137) inch Environment 4.2w (System) 12-24 Vdc, (7A-3A) 60w @ 24v 50w @ 12v ƒƒ ƒƒ ƒƒ ƒƒ Shock Freefall Vibration Patent IEC/EN 60950, UL61010-2-201, e-Mark Comply with *Class 1 Division 2, * IECEx, *ATEX CE, FCC, e-Mark EN 55011/ 55022 Class A, EN 61000-6-4, FCC Part 15 Subpart B Class A EN 55024/ EN 61000-6-2 EN 61000-4-2 (ESD) Level 3 EN 61000-4-3 (RS) Level 3; EN 61000-4-4 (EFT) Level 3 EN 61000-4-5 (Surge) Level 3; EN 61000-4-6 (CS) Level 3 EN 61000-4-8 (Magnetic Field) Level 3 IEC 60068-2-27 IEC 60068-2-32 IEC 60068-2-6 http://www.advantech.com/legal/patent ƒƒ Operating Temperature Wide Temp Models: -40 to 75°C (-40 to 167°F) Standard Models: -25 to 60°C (-4 to 140°F) ƒƒ Storage Temperature -40 ~ 85°C (-40 ~ 185°F) ƒƒ Relative Humidity 10 ~ 95% (non-condensing) Switch Properties ƒƒ MAC Address ƒƒ Packet Buffer ƒƒ Switching Capacity 2K entries 1 Mbit 4.8 Gbps Industrial Ethernet Soultions All product specifications are subject to change without notice Last updated : 23-Aug-2016 EKI-5624P/PI Dimensions Unit: mm [inch] Ordering Information ƒƒ EKI-5624P ƒƒ EKI-5624PI 4 x 10/100BaseT(X) with PoE + 2GE , -25 to 60°C operating temperature 4 x 10/100BaseT(X) with PoE + 2GE , -40 to 65°C operating temperature Online Download www.advantech.com/products